Typically used with low-pressure stainless steel threaded pipe fittings.

Also known as Class 150 flanges, these corrosion-resistant flanges are designed for low-pressure pipe applications.

Use these fittings in extreme-pressure conditions up to 15,000 psi.

Choose these fittings when you want the same high-quality found in our low-pressure pipe fittings, but need more strength to handle higher pressures.

Use these heavy duty, corrosion-resistant fittings in high-pressure flow applications.

Also known as ANSI flanges.

Bolt two same-size flanges together with a gasket to create an access point within a pipe line.

Also known as Code 61 SAE hydraulic flanges.

Also known as Schedule 10 fittings, these are thin, lightweight, and corrosion resistant.

Use these fittings for low-pressure applications in noncorrosive environments.

Made of galvanized steel, this Schedule 40 pipe has fair corrosion resistance and is designed for low-pressure applications.

For use in noncorrosive environments, these fittings have better strength than our low-pressure iron and steel pipe fittings.

A galvanized finish gives these fittings fair corrosion resistance. They have the strength to handle medium-pressure applications.

Also known as Class 300 flanges, these medium-pressure flanges have a galvanized finish for fair corrosion resistance.

Made to tighter tolerances than other steel pipe fittings, these are also known as instrumentation fittings.

Typically used with extreme-pressure iron and steel threaded pipe fittings. Also known as Schedule XXH.

Combine an adapter with a two-piece pipe flange (sold separately) to build a customized flange connection for noncorrosive environments.

Also known as Class 1500 steel flanges, these have the strength to handle high pressures.

Forged for extra strength, these heavy duty unthreaded flanges can withstand high-pressure applications.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Bolt two flanges of the same size together with a gasket to create an access point in a pipe line.

Not only do these brass fittings have the strength to handle high-pressure applications, the male threads have a sealant applied for extra protection against leaks.

When space in your pipe line is limited, choose these miniature fittings that are one inch or less in length.

Install and remove these high-pressure brass fittings with a socket wrench or hex key (sold separately).

Typically used with low-pressure brass and bronze threaded pipe fittings.

The male threads on these brass fittings have a sealant applied for extra protection against leaks. Also known as Class 125 fittings, they are built for use in low-pressure applications.

Used in low-pressure pipe lines, these brass fittings have a plating that makes them shiny and improves corrosion resistance.

Extreme pressures are no problem for these heavy-duty brass fittings.

Plated with nickel, these brass fittings resist rust better than steel and unfinished brass fittings. Select them when you need more strength in corrosive environments to handle higher pressures than our low-pressure fittings.

Typically used with low-pressure aluminum threaded pipe fittings.

Also known as Class 3000 fittings, these have the highest pressure rating of all the aluminum pipe fittings we offer.

Their small size makes these miniature fittings a good choice for cramped, confined spaces.

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

Connect to thick-wall plastic pipe fittings for use in heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Pipe can handle pressures up to 900 psi.

Use for pressures up to 60 psi. Also known as insert fittings, these slide into semi-flexible plastic pipe and secure with a clamp.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Class 150 flanges. Use in high-temperature plumbing and water supply applications up to 200° F.

Connect these fittings to UV-resistant PVC pipe. Designed for outdoor use, they contain an additive that protects against the damaging effects of ultraviolet light. Fittings are typically used in low-pressure residential and commercial plumbing and water supply applications up to 300 psi.

Bolt two same-size flanges together with a gasket to create an access point within a line. Also known as Schedule 40 flanges, they are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.

Pipe has a snap-together design that allows you to quickly connect to fittings with no cement required. It is typically used in gravity-flow drainage applications.

With thinner walls than Schedule 40 fittings, these are lighter in weight and have more space on the inside for high-flow applications, such as underground gravity-flow sewer and storm drainage lines. They are also known as SDR 35 fittings.

These fittings are an economical option for chemical waste systems. Fittings are ABS plastic, which has excellent strength and impact resistance and good chemical resistance.

Flanges have excellent corrosion resistance to handle a wide range of acids and other highly-corrosive chemicals. Use in metal surface treating applications, plating solution lines, and other chemical process applications. They are reinforced with fiberglass layers for better strength and durability than any of our other pipe flanges for chemicals. Bolt two same-size flanges together with a gasket to create an access point within a line.

Also known as manifold flange fittings, these have a clamp-together design that lets you access your line for routine maintenance. Fittings resist acids, solvents, and other harsh chemicals. They won’t deteriorate when exposed to the damaging effects of ultraviolet light, so they’re suitable for outdoor use.

Not only do these PFA fittings have the chemical resistance to handle acid and salt water, they also have better crack resistance than other plastic pipe fittings for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

Made of polypropylene, these fittings won’t deteriorate when exposed to the damaging effects of ultraviolet light and are suitable to use outdoors. They have the chemical resistance to withstand acids, solvents, and other harsh substances.

Also known as Victaulic pipe, this pipe has grooved ends that connect to fittings and flanges with a clamp, so you can access your line for routine maintenance. It is CPVC, which has excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances.

The grooved ends on these flanges connect to pipe with a clamp, so you can access your chemical process line for routine maintenance. Flanges have excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances. They are also known as Victaulic flanges.

Use these plastic fittings to connect gasoline fuel lines to machines and equipment. They have excellent corrosion resistance as well as high strength and impact resistance.

Also known as no-hub couplings, these have a one-piece sleeve with a stop in the center, so you know your pipe is always aligned correctly.

When cleanliness is crucial to your application, choose these fittings that are individually cleaned and bagged to prevent contamination.

With a nickel-plated finish, these compression fittings resist corrosion better than plain brass fittings.

The sleeve in these fittings is rubber instead of metal, so it cushions the tubing and absorbs vibration while creating a tight seal.

Crimp these fittings to copper tubing with a crimping tool for a leak-tight connection that doesn’t require heat or soldering. They are comparable to Viega ProPress fittings.

Made of plastic, these fittings are lightweight compared to our brass push-to-connect fittings.

No sleeve is required to assemble these fittings, which makes for a faster, more convenient installation compared to 37° flared fittings. They are also known as refrigeration and SAE fittings.

The flared end of the fitting nests inside the fitting body, providing extra support to the tubing. Fittings are also known as inverted 45° flared fittings.

Also known as KF, QF, and NW fittings, these fittings are for high-vacuum applications, such as vacuum coating and heat treating, leak testing, and analyzing gases.

Individually bagged to prevent contamination, these fittings are suitable for applications that require a high level of cleanliness.

A PTFE seal on the tube end of these fittings allows for an extra-strong connection in high-vibration applications.

Instead of a metal sleeve (ferrule), these fittings have a rubber sleeve that cushions tubing and absorbs vibration to maintain a tight seal, even when connected to large pumps.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included.

The thick walls of these fittings can withstand more than twice the pressure of standard compression fittings.

Thicker walls make these fittings—sometimes called flareless or bite fittings—withstand about twice as much pressure as standard compression fittings, so they’re good for hydraulic power applications.