Constructed of a carbide tip brazed onto a ground steel shank, these tools are more wear resistant than high-speed steel tools.

The diamond tip on these tools offers superior cutting performance on nonferrous and nonmetallic materials, such as aluminum, copper, fiberglass, and plastic.

A thinner cutting edge and thicker top edge give these blades a T-shape profile that moves chips away from the cut and reduces friction for fast cutting.

A carbide tip brazed onto a ground steel shank makes these tools more wear resistant than high-speed steel tools.

Cut small grooves inside a workpiece for insertion and removal of O-rings.

The carbide tip brazed onto the ground steel shanks of these tools is more wear resistant than high-speed steel.

When cutting threads in nonferrous and nonmetallic materials, such as aluminum, copper, fiberglass, and plastic, diamond tips provide superior cutting performance.

A carbide tip brazed onto a ground steel shank makes these tools less brittle than solid carbide tools.

The long steel shank on these tools can reach farther inside the workpiece than standard boring tools.

These are the smallest boring tools we offer.

Contour the interior wall of a hollow workpiece.

Constructed of a carbide tip brazed onto a ground steel shank, these tools are more wear resistant than high-speed steel tools.

Use these tools to enlarge existing holes to precise diameters.

Place a cutoff blade into one of these holders to keep it in place in the lathe.

Choose these premium turning carbide inserts to cut a variety of materials without changing out your tool.

Heat resistant and shaped for turning stainless steel specifically, these inserts will last longer than inserts for multiple materials.

Made of an abrasion-resistant carbide designed for turning cast iron, these inserts will last longer than inserts for multiple materials.

Cut aluminum, copper, brass, and other non-ferrous materials with these premium inserts.

These tools come with carbide inserts installed. When one edge of the insert dulls, rotate it to use a sharp edge.

Resisting wear and fractures when cutting hardened steel, these cubic boron nitride inserts last longer than carbide inserts.

Combine a holder and carbide insert to perform cutoff and grooving tasks on a lathe.

Pair these holders with a tool block for right- and left-hand mounting in a lathe.

The rounded nose on these inserts contours the outside of the workpiece and cuts grooves with rounded edges.

Cut square corner grooves in a workpiece or cut completely through a part.

These inserts can cut grooves on both the outside and inside of a workpiece depending on the holder used.

Install these inserts into a compatible holder to cut external or internal threads on a workpiece.

These tools come with one high-speed steel insert for use on steel and stainless steel and one high-speed steel insert for use on softer materials, such as aluminum and brass. When one point of an insert dulls, rotate it to use a sharp point.

These holders conform to ANSI standards.

Deliver coolant through the holder to keep workpieces cool while boring tough materials, such as steel, stainless steel, and nickel-based alloys.

Contour the interior wall of a hollow workpiece when you pair a holder with a compatible insert.

Consistently position workpieces in a three-jaw lathe chuck by installing a chuck stop. These stops enable short workpieces to extend beyond the chuck's jaws, providing additional clearance.

When a job calls for a 5C collet, save time by using an adapter instead of removing your lathe chuck.

When hand pressure is released, these wrenches automatically pop out of lathe chucks to keep users and machines safe from harm. Use them to prevent accidents that can occur when someone forgets to remove their wrench before turning on a lathe.

Made from hardened steel, these jaws have a long service life even when performing heavy machining such as roughing cuts.

Hold machinable lathe chuck jaws in place during machining to make accurate cuts, ensuring the jaws will securely grip your workpiece.

Pair these knurls with a knurling tool to create patterns on a workpiece for an improved grip.

Attach these tools to a manual lathe.

Create a knurled pattern on the end of a workpiece.

These light duty centers are for intermittent use on manual lathes.

Also known as bull-nose centers, these have a wide head to hold pipe and large-diameter tubing.

The mandrels in these sets have an expanding screw that widens the end of the mandrel for a tight hold on the inside of a workpiece.

The sleeve on these mandrels expands to hold a range of diameters for better versatility than solid and expanding-end mandrels.

Block chips while maintaining an unobstructed view of the workpiece.

Grip square-shank lathe tools.

Four flat head screws lock down round-shank tools in a precision-ground bore for increased rigidity over other round-shank tool holders.

Securely hold cutoff blades in a quick-change tool post.

These holders work with any 5C collet to rigidly grip drill bits, taps, end mills, and other tools.