Machine plastic and most metal with these high-speed steel tools.

Also known as parting blades, use these to separate a finished part from the workpiece.

The carbide tip brazed onto these blades is more wear resistant than high-speed steel.

Machine grooves in plastic and most metal with these high-speed steel tools.

An extra-long shank provides additional reach.

Machine circular grooves onto the end of a workpiece.

Cut threads in plastic and most metal with these high-speed steel tools.

Solid carbide provides more rigidity than carbide-tipped tools.

Use these tools to enlarge existing holes to precise diameters.

These are the smallest boring tools we offer.

Form concave or convex edges on a workpiece.

An extra-long shank provides additional reach.

Machine plastic and most metal with these high-speed steel tools.

Use these tools to enlarge existing holes to precise diameters.

Secure square-shank tools to a lathe.

Replace clamps, screws, seats, and slotted pins in carbide insert holders.

Choose these premium turning carbide inserts to cut a variety of materials without changing out your tool.

Optimized for use on steel, these inserts can run at higher cutting speeds and will last longer than inserts for multiple materials.

Heat resistant and wear resistant, these inserts cut super alloys—such as Inconel and Waspaloy—and titanium better than general use inserts.

These sets have five indexable turning tools with carbide inserts and a wood storage stand. When one edge of a tool's insert dulls, rotate it to use a sharp edge.

Resisting wear and fractures when cutting hardened steel, these cubic boron nitride inserts last longer than carbide inserts.

Fit these holders directly into a lathe tool post or appropriately sized holder without the need for a tool block.

Mount blade-style holders to a lathe tool post or turret.

The rounded nose on these inserts contours the outside of the workpiece and cuts grooves with rounded edges.

Pair these holders with a tool block for right- and left-hand mounting in a lathe.

Pair these holders with a threading insert or a grooving insert to make cuts on the outside of a workpiece.

Pair these holders with a threading insert or a grooving insert to make cuts on the inside of a hollow workpiece.

These tools come with one high-speed steel insert for use on steel and stainless steel and one high-speed steel insert for use on softer materials, such as aluminum and brass. When one point of an insert dulls, rotate it to use a sharp point.

Pair one of these inserts with a compatible boring carbide insert holder with coolant hole.

These sets have a variety of indexable boring insert holders with carbide inserts and a wood storage stand. When one edge of a tool's insert dulls, rotate it to use a sharp edge to enlarge existing holes to precise diameters.

Combine a carbide insert with a compatible internal profiling holder to create a tool that can contour the interior wall of a hollow workpiece.

When a job calls for a 5C collet, save time by using an adapter instead of removing your lathe chuck.

No need to break down a collet set up when a workpiece doesn't fit a 5C collet. Install one of these lathe chuck adapters in your 5C collet chuck or holder and its three jaws will securely grasp the workpiece.

When hand pressure is released, these wrenches automatically pop out of lathe chucks to keep users and machines safe from harm. Use them to prevent accidents that can occur when someone forgets to remove their wrench before turning on a lathe.

Made from hardened steel, these jaws have a long service life even when performing heavy machining such as roughing cuts.

Secure jaws to a CNC lathe chuck with industry standard 1.5 mm × 60° serrations or wider 3 mm × 60° serrations.

An expanding screw widens the end of the mandrel for a tight hold on the inside of a workpiece.

Use an arbor press to secure the narrow end of one of these tapered mandrels into the hole of a workpiece.

A hardened body and point provide the extra strength and wear resistance necessary for continuous use on manual or CNC lathes.

Dead centers are one solid piece. Use them in the headstock when machining between centers or in the tailstock to support the end of a workpiece when friction is not a concern.

Also known as axial-feed knurls, these have a convex face, which produces a cleaner pattern and lasts longer than standard knurls.

Create a knurled pattern on the end of a workpiece.

These tools are specially designed to perform heavy duty knurling applications using a CNC lathe.

These guards mount and travel on the cross slides and are fully adjustable in all directions.

A V-groove enables these holders to grip round-shank as well as square-shank tools.

Two slide-in dovetail mounts on the tool posts allow you to quickly change from one tool holder to another.

A built-in drill chuck allows quick installation of drill bits, taps, and other round- or hex-shank tools into a quick-change tool post.

Mount any tool with a Morse taper shank to a quick-change tool post.

Increase the diameter of boring bars, drill bits, and other shank-style cutting tools to securely fit CNC lathe tool blocks.