Steel reinforcement prevents bulging on these lightweight, dent-resistant plastic trucks. The seamless body prevents leaks, resists many chemicals, and can be cleaned with hot water and detergent. The tapered shape allows trucks to nest together for space-saving storage. The casters are mounted in a diamond pattern to allow for tighter turns and better maneuverability with lightweight polypropylene wheels that roll best on smooth surfaces.

Lids (sold separately) cover and conceal the load.

Tow up to three of these trucks at a time using the tow bar and hitch coupler. Trucks are made of lightweight, dent-resistant plastic that's reinforced with steel to prevent bulging. The seamless body prevents leaks, resists many chemicals, and can be cleaned with hot water and detergent. The tow bar can be locked in the upright position for nontowing applications and trucks can be nested for space-saving storage. Their shock-absorbing and nonmarking polyurethane wheels roll easily over smooth and rough surfaces.

Lids (sold separately) cover and conceal the load.

Reduce bending while loading and unloading —elevated trucks provide a comfortable working height. Made of lightweight plastic, these trucks resist dents, corrosion, and many chemicals. The seamless body is strong enough for wet and dry loads. It prevents leaks and can be cleaned with hot water and detergent. They have four swivel casters with shock-absorbing rubber wheels for easy maneuvering over smooth and rough surfaces.

To minimize bending and lifting, these trucks have a spring platform that adjusts to a comfortable working height as you load and unload. Made of lightweight polyethylene, they resist dents, corrosions, and many chemicals. Because they have a drain hole and the spring platform is removable, they’re easy to clean with hot water and detergent. The rubber tread-on-core wheels roll smoothly on all surfaces—they have a hard core for strength and a tread that absorbs shocks and sounds.

Trucks with side entry have an opening on one side, so you don’t have to reach over the top to load and unload. Trucks with a lid and side door let you cover the top and side openings; secure them with a padlock.

Antimicrobial trucks resist deterioration, stains, and odors caused by mold and mildew.

Trucks with only swivel casters are easier to maneuver than trucks with rigid casters. Trucks with swivel and rigid casters have better steering control than trucks with only swivel casters.

For technical drawings and 3-D models, click on a part number.

These versatile hampers have flexible fabric sides and can handle wet and dry loads. They have a welded spring-steel frame; the bottom support is wood reinforced with welded flat steel. They also have reinforced wear points, fabric handles, and a storage pocket. Hampers nest together for storage. Casters are mounted in a diamond pattern to allow for tighter turns and better maneuverability, and they have debris guards to protect the wheel bearings from contamination. Their rubber tread-on-core wheels have a hard core for strength surrounded by a shock- and sound-absorbing tread for a cushioned ride on all surfaces.

Canvas body hampers have riveted seams for added strength.

Nylon body hampers are vinyl-coated to resist dirt and grease and have a smooth, snag-free surface.

Spring-loaded shelves (sold separately) raise and lower the load for easier loading and unloading. Fabric-covered springs on each corner of the vinyl-covered steel shelf mount inside the hamper.

Replacement fabric baskets replace the fabric liner.

Use these trucks to store, move, or dump ingredients or other items in sanitary environments, such as food processing plants. With seamless welds, polished surfaces, and rounded edges, there are no crevices where bacteria can grow, reducing the chance of a foodborne illness. Made of stainless steel, these trucks won’t corrode from frequent washdowns with harsh cleaners and sanitizers. They meet NSF/ANSI 2 sanitary design requirements for food equipment.

These trucks have a V-shaped spout—similar to those on a pitcher—that makes it easier to pour. To keep liquids that drip off of the spout from running under the trucks and onto the wheels, a drip plate will divert them onto the floor. To protect these trucks from damage if they’re accidentally bumped or knocked over, they have a reinforced bottom plate and top lip. They also have a lifting arm on each side so you can attach them to food processing machines, hydraulic lifts, automatic dumpers, and washing racks.

Each truck has two rigid casters and two axle-mounted wheels that are installed in a diamond pattern, so you can easily push them forwards, backwards, left, and right. The wheels are polypropylene with a nylon core, making them best for smooth surfaces. They’re also impact resistant.

Use the optional washing racks to lift the trucks for a thorough cleaning. Slide the truck lifting arms into the rack arms and flip the racks 90° to turn the trucks on their side to clean their interior and exterior surfaces. Made of stainless steel, these racks won’t corrode from frequent washdowns with harsh cleaners and sanitizers. They have seamless welds and polished surfaces to eliminate crevices where bacteria can grow, reducing the likelihood of a foodborne illness. They meet NSF/ANSI 2 sanitary design requirements for food equipment. These racks have two rigid casters with polypropylene wheels, making them best for smooth surfaces. The wheels are also impact resistant.

For technical drawings and 3-D models, click on a part number.