Output Current Output Current |
|---|
|
Duty Cycle Duty Cycle |
|---|
|
TIG Welders
A shielding gas is required for use. Welder has a built-in polarity switch to select AC or DC amperage.
The optional cart allows you to easily transport your welder and gas tank from place to place.
Input | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Min. Material Thick. | For Min. Sheet Metal Thick., ga. | Duty Cycle | Voltage | Frequency, Hz | Phase | Output Current | Wt., lbs. | Cord Lg., ft. | Plug Type | Includes | Each | |
Lincoln K2535-1 | ||||||||||||
| 1/64" | 24 | 1 Minute On, 9 Minutes Off | 208V AC/230V AC | 60 | Single | 225 A @ 15.7 V AC/DC | 212 | 9 | Three Prong | TIG Torch 12-ft. Welding Cable 10-ft. Ground Cable with Ground Clamp Gas Regulator Welding Hose Foot-Pedal Control Built-In Polarity Switch | 0000000 | 000000000 |
| Includes | Each | |
| Long Back Cap 0.040" Collet 1/16" Collet 3/32" Collet 0.040" Collet Body 1/16" Collet Body 3/32" Collet Body 1/4" Alumina Nozzle 5/16" Alumina Nozzle 3/8" Alumina Nozzle 7" Long Tungsten Electrode with 0.040" Diameter 7" Long Tungsten Electrode with 1/16" Diameter 7" Long Tungsten Electrode with 3/32" Diameter | 0000000 | 0000000 |
| Lg. | Wd. | For Max. Gas Tank Dia. | For Max. Gas Tank Ht. | Includes | Each | |
| 42" | 21" | 9" | 51" | Bracket and chain for securing a gas tank | 0000000 | 0000000 |
Multiprocess Welders
Repair most metals with a single machine—these welders perform MIG, TIG, and stick welds. MIG welding is often used for general purpose applications, as it’s faster than other techniques and easiest to learn. TIG welding works on thin metal and leaves a clean appearance, so it’s commonly used for finish work. Stick welding is the best method for heavy duty welds on thick or dirty metal. It’s also the easiest to do outdoors, since it doesn’t use shielding gas that could be affected by wind.
Carts let you easily move welders, gas and accessories from one area to another.
Spool guns hold a small spool of welding wire for use when MIG welding aluminum.
TIG torches are required for TIG welding. TIG foot pedals let you control amperage to make adjustments while TIG welding.
Input | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Wire Type | For Wire Dia. | For Min. Material Thick. | For Min. Sheet Metal Thick., ga. | Duty Cycle | Voltage | Frequency, Hz | Phase | Output Current | Wt., lbs. | Includes | Each | |
Lincoln K3461-1 | ||||||||||||
| Solid, Flux Core | 0.025", 0.030", 0.035" | 1/64" | 24 | 6 Minutes On, 4 Minutes Off | 120V AC | 60 | Single | 115 A @ 15 V AC 80 A @ 23 V AC 95 A @ 19 V AC | 35 | 1/2-lb. Spool of 0.025" Copper-Coated Steel Solid Wire 1/2-lb. Spool of 0.035" Steel Flux-Core Wire 10-ft. Ground Cable with Ground Clamp Gas Nozzle for Welding Solid-Core Wire Gas Regulator Gasless Nozzle for Welding Flux-Core Wire Welding Gun Contact Tips | 0000000 | 0000000 |
| Lg. | Wd. | For Max. Gas Tank Dia. | For Max. Gas Tank Ht. | Each | |
| 28" | 14" | 7 1/4" | 32" | 00000000 | 0000000 |
| For Use With | For Wire Type | For Wire Dia. | Duty Cycle | Max. Current, A | Cable Lg., ft. | Cable Material | Includes | Each | |
| Argon | Solid, Flux Core | 0.030", 0.035" | 6 Minutes On, 4 Minutes Off | 130 | 10 | Rubber | 1-lb. Spool of 0.035" Steel Flux-Core Wire Contact Tips Nozzle | 00000000 | 0000000 |
| For Use With | Neck Flexibility | Duty Cycle | Max. Current, A | Cooling Method | Cable Lg., ft. | Cable Material | Includes | Each | |
| Argon | Rigid | 6 Minutes On, 4 Minutes Off | 125 | Air | 12.5 | Rubber | Cable and Hose Assembly Long Back Cap Torch Body Torch Handle | 00000000 | 0000000 |
| Cable Lg., ft. | Each | |
| 13 | 00000000 | 0000000 |