	Container Type Container Type


Bottle	Tube

Brush-Top Bottle	Spray Bottle

Cartridge	Syringe

	Color Color

	Type Type

	Component Component

	Container Size Container Size

	For Use On For Use On

	Cure Type Cure Type

Room Temperature

Anaerobic

	Consistency Consistency

Thin Liquid

Thick Liquid

Gel

	Manufacturer Model Number Manufacturer Model Number

243
263
401
403
406
408
410
411
426
454
455
460
480
518
567
587
609
660
4011
4013
4014
4031
4061
4081
4203
4204
4205
4210
4211
4471
4501
4541
4601
4851
4861
4981
5452
7701

	Removal Method Removal Method

Hand Tool

Hand Tool and Heat

	Begins to Harden Begins to Harden

	Maximum Gap Size Filled Maximum Gap Size Filled

	Formulation Formulation

Cyanoacrylate

Acrylic

Silicone

	For Maximum Thread Diameter For Maximum Thread Diameter

3/4"

	Maximum Temperature Maximum Temperature

	Minimum Temperature Minimum Temperature

-65° F

-60° F

	For Joining For Joining

	Breakaway Torque Breakaway Torque

105 in.-lbs.

275 in.-lbs.

	Specifications Met Specifications Met

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Shear Strength Shear Strength

Less than 2,000 lbs./sq.
in.

2,000 to 2,499 lbs./sq.
in.

2,500 to 2,749 lbs./sq.
in.

2,750 to 2,999 lbs./sq.
in.

3,000 lbs./sq. in. or
greater

Not Rated

	Clarity Clarity

Clear

Opaque

	Viscosity Viscosity

View catalog pages (6)

Forward

How can we improve?

53 Products

About Structural Adhesives

Also known as super glue, these adhesives bond quickly. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
401	0.1	Tube	0.005"	15 sec.	24 hrs.	Thin Liquid (110 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
401	0.7	Bottle	0.005"	15 sec.	24 hrs.	Thin Liquid (110 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
401	16	Bottle	0.005"	15 sec.	24 hrs.	Thin Liquid (110 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000
4011	0.7	Bottle	0.005"	15 sec.	24 hrs.	Thin Liquid (120 cP)	-65° to 180°	Clear	Cardboard, Fabric, Metal, Plastic, Rubber, Wood	000000	00000
4013	0.7	Bottle	0.007"	20 sec.	24 hrs.	Thin Liquid (600 cP)	-65° to 180°	Clear	Metal, Plastic, Rubber	0000000	00000
4471	0.7	Bottle	0.008"	15 sec.	24 hrs.	Thin Liquid (630 cP)	-65° to 180°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
4471	16	Bottle	0.008"	15 sec.	24 hrs.	Thin Liquid (630 cP)	-65° to 180°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000

Toughened Instant-Bond Adhesives

Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
410	0.1	Tube	0.008"	90 sec.	24 hrs.	Thick Liquid (3,350 cP)	-65° to 220°	Black	Composites, Metal, Plastic, Rubber	00000000	00000
410	0.7	Bottle	0.008"	90 sec.	24 hrs.	Thick Liquid (3,350 cP)	-65° to 220°	Black	Composites, Metal, Plastic, Rubber	00000000	00000
410	16	Bottle	0.008"	90 sec.	24 hrs.	Thick Liquid (3,350 cP)	-65° to 220°	Black	Composites, Metal, Plastic, Rubber	00000000	000000
411	0.1	Tube	0.008"	30 sec.	24 hrs.	Thick Liquid (6,000 cP)	-65° to 210°	Clear	Composites, Metal, Plastic, Rubber	00000000	0000
411	0.7	Bottle	0.008"	30 sec.	24 hrs.	Thick Liquid (6,000 cP)	-65° to 210°	Clear	Composites, Metal, Plastic, Rubber	00000000	00000
411	16	Bottle	0.008"	30 sec.	24 hrs.	Thick Liquid (6,000 cP)	-65° to 210°	Clear	Composites, Metal, Plastic, Rubber	00000000	000000
480	0.7	Bottle	0.006"	90 sec.	24 hrs.	Thin Liquid (150 cP)	-65° to 180°	Black	Composites, Metal, Plastic, Rubber	00000000	00000
480	16	Bottle	0.006"	90 sec.	24 hrs.	Thin Liquid (150 cP)	-65° to 180°	Black	Composites, Metal, Plastic, Rubber	00000000	000000

Moisture-Resistant Instant-Bond Adhesives

In especially damp or humid environments, these adhesives keep their hold. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

4203, 4204, 4210, and 4211 are toughened with rubber for better impact resistance.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
4203	0.7	Tube	0.005"	40 sec.	24 hrs.	Thin Liquid (380 cP)	-65° to 250°	Clear	Composites, Metal, Plastic, Rubber	00000000	000000
4204	0.7	Tube	0.008"	75 sec.	24 hrs.	Thick Liquid (4,000 cP)	-65° to 250°	Clear	Composites, Metal, Plastic, Rubber	00000000	00000
4210	0.7	Bottle	0.01"	90 sec.	24 hrs.	Thin Liquid (160 cP)	-65° to 250°	Black	Composites, Metal, Plastic, Rubber	00000000	00000
4211	0.7	Bottle	0.01"	90 sec.	24 hrs.	Thick Liquid (2,580 cP)	-65° to 250°	Black	Composites, Metal, Plastic, Rubber	00000000	00000
4981	0.7	Bottle	0.007"	50 sec.	24 hrs.	Thin Liquid (500 cP)	-65° to 220°	Clear	Metal, Plastic, Rubber	0000000	00000

Flexible Instant-Bond Adhesives

Accommodate joint movement with these adhesives that remain pliable when cured. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Elongation	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
4851	0.7	Bottle	0.006"	20 sec.	24 hrs.	Thin Liquid (380 cP)	85%	-65° to 120°	Clear	Composites, Fabric, Metal, Plastic, Rubber	00000000	000000
4861	0.7	Bottle	0.008"	20 sec.	24 hrs.	Thick Liquid (4,250 cP)	85%	-65° to 120°	Clear	Composites, Fabric, Metal, Plastic, Rubber	00000000	00000

Optically Clear Instant-Bond Adhesives

To invisibly bond transparent plastics, these adhesives won’t turn cloudy. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
4031	0.7	Bottle	0.008"	50 sec.	24 hrs.	Thick Liquid (1,380 cP)	-65° to 160°	Clear	Metal, Plastic, Rubber	0000000	000000
4601	0.7	Bottle	0.004"	50 sec.	24 hrs.	Thin Liquid (50 cP)	-65° to 160°	Clear	Metal, Plastic, Rubber	000000	00000

Low-Odor Instant-Bond Adhesives

Form bonds without the strong odor of other instant-bond adhesives. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

403 and 460 work especially well on porous materials such as wood, paper, and fabric.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
403	0.7	Bottle	0.008"	50 sec.	24 hrs.	Thick Liquid (1,380 cP)	-65° to 200°	Clear	Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood	00000000	000000
460	0.7	Bottle	0.004"	50 sec.	24 hrs.	Thin Liquid (40 cP)	-65° to 200°	Clear	Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood	00000000	00000
460	16	Bottle	0.004"	50 sec.	24 hrs.	Thin Liquid (40 cP)	-65° to 200°	Clear	Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood	00000000	000000

Instant-Bond Adhesive Gel for Hard-to-Bond Materials

Quickly adhere hard-to bond surfaces with these adhesives, also known as super glue. These thick gels fill gaps between parts and won't drip on vertical surfaces. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

Dispense adhesives in syringes with a plunger (sold seperately).

Dispense adhesives in cartridges with a standard caulk gun.

454 and 4541 are suitable for porous and dissimilar materials.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
454	0.1	Tube	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
454	0.3	Syringe	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
454	0.7	Tube	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
454	1	Syringe	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
454	7	Tube	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000
454	10.5	Cartridge	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000
4541	0.3	Syringe	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 180°	Clear	Cardboard, Fabric, Metal, Plastic, Rubber, Wood	0000000	00000
4541	0.7	Tube	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 180°	Clear	Cardboard, Fabric, Metal, Plastic, Rubber, Wood	00000000	00000

Toughened Instant-Bond Adhesive Gel

These adhesives are blended with rubber for better impact and moisture resistance than other instant-bond adhesives. Also known as super glue, these thick gels fill gaps between parts and won't drip on vertical surfaces. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

Dispense adhesives in syringes with a plunger (sold separately).

Dispense adhesives in cartridges with a standard caulk gun.

4205 is suitable for fiber-optic components.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
426	0.3	Syringe	0.01"	20 sec.	24 hrs.	Gel (10,500 cP)	-65° to 210°	Black	Composites, Metal, Plastic, Rubber	00000000	000000
426	0.7	Tube	0.01"	20 sec.	24 hrs.	Gel (10,500 cP)	-65° to 210°	Black	Composites, Metal, Plastic, Rubber	00000000	00000
426	10.5	Cartridge	0.01"	20 sec.	24 hrs.	Gel (10,500 cP)	-65° to 210°	Black	Composites, Metal, Plastic, Rubber	00000000	000000
4205	0.7	Tube	0.01"	90 sec.	24 hrs.	Gel (35,000 cP)	-65° to 250°	Clear	Composites, Metal, Plastic, Rubber	00000000	00000

Instant-Bond Adhesive Gel

Use these thick gels, also known as super glue, on vertical surfaces or to fill gaps between parts. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
454	0.1	Bottle	0.01"	15 sec.	24 hrs.	Gel (Not Rated)	-65° to 250°	Clear	Composites, Metal, Plastic, Rubber	00000000	00000

Low-Odor Instant-Bond Adhesive Gel

Form bonds without the strong odor of other instant-bond adhesives. These nonsagging gels, also known as super glue, fill gaps between parts and won't drip on vertical surfaces. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

Dispense adhesives in syringes with a plunger (sold seperately).

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
455	0.3	Syringe	0.01"	40 sec.	24 hrs.	Gel (18,000 cP)	-65° to 200°	Clear	Composites, Metal, Plastic, Rubber	00000000	000000
455	7	Tube	0.01"	40 sec.	24 hrs.	Gel (18,000 cP)	-65° to 200°	Clear	Composites, Metal, Plastic, Rubber	00000000	000000

Wicking Instant-Bond Adhesives

These thin liquids, also known as super glue, flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
406	0.1	Tube	0.004"	15 sec.	24 hrs.	Thin Liquid (20 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
406	0.7	Bottle	0.004"	15 sec.	24 hrs.	Thin Liquid (20 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
406	16	Bottle	0.004"	15 sec.	24 hrs.	Thin Liquid (20 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000
4014	0.7	Bottle	0.002"	30 sec.	24 hrs.	Thin Liquid (3 cP)	-65° to 220°	Clear	Metal, Plastic, Rubber	0000000	00000
4061	0.7	Bottle	0.004"	15 sec.	24 hrs.	Thin Liquid (20 cP)	-65° to 180°	Clear	Metal, Plastic, Rubber	0000000	00000
4061	16	Bottle	0.004"	15 sec.	24 hrs.	Thin Liquid (20 cP)	-65° to 180°	Clear	Metal, Plastic, Rubber	00000000	000000

Optically Clear Wicking Instant-Bond Adhesives

To invisibly bond transparent plastics, these adhesives won’t turn cloudy. Also known as super glue, they have a thin consistency that allows them to flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
408	0.7	Bottle	0.002"	50 sec.	24 hrs.	Thin Liquid (7 cP)	-65° to 160°	Clear	Composites, Metal, Plastic, Rubber	00000000	000000

Low-Odor Wicking Instant-Bond Adhesives

Form bonds without the strong odor of other instant-bond adhesives. These adhesives, also known as super glue, have a thin consistency that allows them to flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
4081	0.7	Bottle	0.002"	50 sec.	24 hrs.	Thin Liquid (7 cP)	-65° to 160°	Clear	Metal, Plastic, Rubber	0000000	000000

Quick-Set Wicking Instant-Bond Adhesives

For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives. Also known as super glue, they have a thin consistency that allows them to flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
4501	0.7	Bottle	0.004"	5 sec.	24 hrs.	Thin Liquid (20 cP)	-65° to 180°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000

Adhesive Maintenance Kits

Assorted adhesives for routine maintenance work or quick repairs.

Mfr.	Includes	Component (Mfr. Model No.)	Reaches Full Strength, hrs.	Mixing Required		Each
Loctite®	Case	Pipe Thread Sealant (567)—50 ml Bottle Threadlocker (243)—0.34 oz. Bottle Threadlocker (263)—0.34 oz. Bottle Retaining Compound (609)—0.34 oz. Bottle Retaining Compound (660)—1.69. Tube Gasket Maker Sealant (587)—2.4 oz. Tube Gasket Maker Sealant (518)—1.69 oz. Tube Pipe Thread Sealant (5452)—50 ml Bottle	24	No	0000000	0000000

Primers for Instant-Bond Adhesives

Improve instant-bond adhesive performance on hard-to-bond slippery plastics. These primers cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).

Primers in brush-top bottles also include a spray head for easy dispensing.

	Container
Mfr. Model No.	Size, oz.	Type	Drying Time, sec.	Consistency	Viscosity, cP	Color	Cannot Be Sold To		Each
Loctite® Primers
7701	1.75	Brush-Top Bottle, Spray Bottle	30	Thin Liquid	1	Clear	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	0000000	000000