This thin lubricant penetrates into tight spaces, and nano-sized additives fill small surface imperfections, reducing wear and heat and extending the life of both the lubricant and equipment.

For use in food-processing and preparation areas, these thin, multipurpose lubricants are NSF registered H1 or FDA compliant for incidental food contact.

Protect food-processing and preparation equipment while limiting environmental impact. These multipurpose lubricants are NSF registered H1 for incidental food contact and are rated to quickly break down in water.

For use in food-processing and preparation areas, use these lubricants to cut through dirt, grease, and rust, and to protect chain and other moving metal parts.

These lubricants foam when applied, so they don’t drip while sinking into roller chain and other moving metal parts. They dry to form a film that prevents dust, dirt, and corrosion.

Spray these lubricants onto wire rope and cable used in vertical or fast-moving applications. They dispense as a thick gel, completely covering wire strands without dripping or running off. Use them to cut through dirt, grease, and rust, and to protect wire rope and cable.

Protect wire rope and cable from corrosion in wet environments. These lubricants have fast-penetrating solvents that quickly reach the core of wire rope and cable to remove water and protect against corrosion.

Protect electrical components—these lubricants insulate and block moisture, preventing electrical malfunctions. They cut through dirt, grease, and rust to clean connections and relays, leaving behind a thin film for long-lasting protection.

This grease remains stable and in place under high pressure, heavy loads, and shock loads. It's often used for demanding mining, construction, and automotive applications.

Formulated to adhere to metal parts and stay in place in wet environments, this grease is commonly used in pulp and paper manufacturing and water management facilities.

Protect equipment while having a limited impact on the environment. This grease resists moisture but still breaks down quickly in water.

For use on metal parts to prevent corrosion and as an antiseize lubricant. Gauges are often coated in a thin layer of lanolin to move smoothly and maintain their precision.

Brush on most metal surfaces to provide a layer of protection against corrosion.

For use in food-processing and preparation areas, this grease is rated for incidental contact with food.

Made with moisture-resistant thickeners, this grease stays in place in wet environments. It is NSF registered H1 and FDA compliant for incidental food contact.

Highly pure and with no additives to contaminate sensitive environments, use this grease in clean rooms and electronic assembly workstations.

Thickened with silica, this heavy grease clings to parts so it won't wash off in wet environments.

A firm consistency and resistance to evaporation make this grease ideal for vacuum applications, such as flow meters, vacuum and pressure systems, and laboratory equipment.

This grease meets NSF/ANSI Standard 51 and FDA 21 CFR 175.300 for direct contact with food and NSF/ANSI Standard 61 for use with components that come into contact with drinking water.

Also known as spindle grease, use this in machine tools and other high-speed applications.

Able to handle light to moderate loads at high speeds, this grease is often used on electric motor bearings for fans, pumps, and dryers.

Lubricate ball and roller bearings for high-load applications in wet environments, such as water processing, steel mills, and mining.

Use this grease in food-processing and preparation areas. It is NSF registered H1 or meets FDA Compliant 21 CFR 178.3570 for incidental contact with food.

Made with moisture-resistant thickeners, this grease resists washing off and reduces corrosion in wet environments while still lubricating under heavy loads.

Made with moisture-resistant aluminum thickener, this grease resists washing off and reduces corrosion in wet environments while still lubricating under heavy loads. It is NSF registered H1 for incidental food contact.

Made with moisture-resistant thickener, this grease resists washing off and reduces corrosion and oxidation in wet environments.

Also known as dielectric grease, use insulating grease to lubricate and protect electrical systems.

Lubricate, clean, deoxidize, and prevent corrosion on electrical contacts to improve their performance.

Specifically designed for use with air-powered impact wrenches, this grease withstands high pressure and heavy loads and prolongs tool life.

Prevent wear and corrosion to keep carriages, guide rails, slides, tracks, and ways fast and accurate.

Micro vibrations caused by surface imperfections on carriage bearings can affect precision. This grease fills in those imperfections so carriages roll smoothly.

Highly pure, this grease won't contaminate sensitive environments, so it can be used in clean rooms.

Keep ball screws moving smoothly, even under heavy loads.

Formulated for use on soft metal, such as aluminum, copper, and brass, these lubricants won’t stain. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life.

These general purpose lubricants reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life.

A high sulfur concentration provides the lubricity required to protect tools and stainless steel work surfaces, but these lubricants will stain other metal. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier.

For use in food-processing and preparation areas, these lubricants are NSF registered H1 for incidental food contact. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life.

Apply these lubricants to abrasive belts and wheels to extend their life and improve ground glass surface finishes. They lubricate the abrasive surface for faster and easier cutting cycles. They won’t stain metal, so they can be used as general purpose grinding fluids.

Spray these lubricants on saw blades and drill bits to make cutting easier and extend the life of your tool. They protect tools from sap, reducing cleaning time. Made without silicone or petroleum, they won’t stain wood or interfere with glue or finishes.

These electrical discharge machining (EDM) lubricants resist oxidation, so they last longer and extend the life of your electrode. They're clear for workpiece visibility.

Designed for use with misting systems, these coolants have excellent cooling properties for intermittent machine cycles when milling and turning.

Apply just a few drops of these coolants to your cutting tools before and during milling and machining to reduce heat with very little cleanup.

For use with micro-drop dispensers, these coolants are mixed with air to create small, controlled droplets that dissipate heat and are easy to clean up. Use for small jobs.

These coolants won’t react with or stain soft metal, such as aluminum or copper. They remove heat, prevent workpiece corrosion and distortion, and improve accuracy while cutting.

For general-purpose grinding, sanding, and finishing, these coolants prevent material from building up to ensure a high-quality finish and preserve tool life.

Designed to handle high pressure generated while tapping, threading, and reaming, these coolants dissipate heat and prevent corrosion to improve surface finishes and extend tool life.

Weld longer without damaging your torch—replace the water in your welding cooler with these coolants to prevent mineral deposits and frozen lines. Coolants also tolerate colder temperatures than water. For use with MIG, TIG, spot, and stud welders. They are nonconductive.

Wear-resistant properties keep hydraulic pumps and equipment working, even in high-pressure systems.

Protect equipment while having a limited impact on the environment. This oil breaks down quickly in water.

Use this oil in machines that require the same lubricant for both their hydraulic and way systems. Antiwear and oxidation-resistant additives make it work well with hydraulic systems, while moly gives it the high load-carrying ability required by way systems.

This oil withstands the heavy loads found in gear boxes.

Phosphorus additives give this oil the strength it needs for use in worm gears.

For use in worm gears, this oil stands up to high pressure. Use it in food-processing and preparation areas where incidental contact with food is possible.

Resistant to oxidation and heat, use this oil to lubricate a variety of machine tools and equipment. It's also known as turbine oil.

Use at pressures up to 50,000 psi.

Keep air-powered tools running longer. This oil prevents corrosion and has wear-resistant and extreme-pressure properties. It absorbs water to reduce condensation and prevent buildup.

Reduce wear on rings, cylinders, and other moving parts in most major manufacturers' air compressors.

Designed to flow well at extremely low temperatures, use this oil with ammonia refrigeration compressors. It won't mix with refrigerant.

These fluids meet Ford and General Motors (Dexron III) specifications for automatic transmission fluids. They can also be used as power steering fluid and compressor fluid.

This stabilizer contains nano-sized additives, which penetrate small surface imperfections to reduce wear and heat, extending the life of both the oil and the engine while improving performance.

Increase the pressure mineral oil can withstand in low-speed, high-pressure applications, such as gears, plain bearings, and ways.

Apply directly to seals and O-rings to extend service life by preventing drying and cracking.

Also known as spindle oil, this thin oil penetrates tight spaces and forms a light film to lubricate angular bearings used in machine tools and other high-speed applications.

Primarily for use in automotive applications, this oil also works well with most machinery.

For long-lasting lubrication in vacuum pumps, this oil is slow to evaporate.

For use in selective catalytic reduction (SCR) systems, this fluid reduces the air pollution from your diesel engine to help you comply with EPA guidelines.

Use these NSF registered H1 lubricants in food-processing and preparation areas with a risk of incidental food contact. They form a nonstick film that won't attract contaminants, such as flour.

A high load-carrying capacity makes these lubricants good for use on chain and moving metal parts. They dry to form a film that lubricates without attracting dust.

Prevent packages from sticking on conveyor rails and chutes. Made with silicone, use these lubricants to create a slippery dry film that won’t attract dust where metal and non-metal surfaces meet.

Made of graphite in a thin oil, these lubricants penetrate wire rope and cable to the core. When the oil evaporates, it leaves behind a dry film of graphite that prevents wear and corrosion throughout the rope without attracting dust.

Also known as thread lubricants, these general purpose antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Corrosion-resistant additives allow these lubricants to prevent parts from locking together in caustic environments, such as steel mills and power plants.

Prevent parts from locking or corroding together even when exposed to wet environments—these lubricants stay in place in the presence of water.

Copper allows these lubricants to conduct electricity, while graphite gives them good chemical and corrosion resistance. Use them to prevent threaded fasteners and close-fitting parts from locking together in connections where you need to conduct electricity.

Use these lubricants to prevent threaded fasteners and close-fitting parts in food-processing and preparation areas from locking together. They're NSF registered H1 for incidental food contact.

These lubricants dry to form a thin, solvent-resistant film that won't squeeze out or attract dirt. Use them to prevent threaded fasteners and close-fitting parts from locking together.

Coat tight-fitting metal parts with these lubricants before sliding them together to make assembly easier. Once assembled, they provide initial lubrication in equipment before oil has a chance to flow.

Made of graphite, these powders and flakes lubricate under heavy loads and high temperatures. They resist most chemicals and conduct heat and electricity. Use them dry or mix with oil and grease.

Also known as paintable mold-release lubricants, these protect molds and prevent molded parts from sticking to them.

Use these lubricants to release large, intricate, or difficult-to-release parts. Also known as paintable mold-release lubricants, they don’t leave a residue, so you can paint or finish the molded part without the need to clean it. They allow you to easily remove cast parts and prevent sticking, stretching, and tearing.

From acid to xylene, these dry and liquid chemicals are useful in a wide range of industrial applications.

A safe alternative to mercury in thermometers and thermostats, gallium transfers heat and electricity without toxic vapor that can be inhaled. Also known as Galinstan.

Keep electric motors and generators working efficiently by removing dirt, grease/oil, gum, and wax.

Designed to be used together to improve the performance of electrical connections, cleaners remove oxidation and corrosion on connections while sealants coat them to prevent oxidation and corrosion.

These dispensers come packed with grease, eliminating the mess of filling. Turn the dial to adjust flow rate.

Spring pressure ensures a constant flow of grease.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

More portable than air-powered options, attach this dispenser to a battery to deliver grease on the go.