Container Type Container Type | Show |
---|
|
Container Type Container Type | Hide |
---|
Trade Name Trade Name |
---|
|
For Use On For Use On |
---|
Lubricant Type Lubricant Type |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
With Detergent With Detergent |
---|
|
SSU Viscosity Grade SSU Viscosity Grade |
---|
|
Specifications Met Specifications Met |
---|
|
Form Form |
---|
![]() | Powder |
For Machining Type For Machining Type |
---|
|
|
Environment Environment |
---|
|
CAS Number CAS Number |
---|
|
Chemical Chemical |
---|
|
Concentration Concentration |
---|
|
Container Material Container Material |
---|
|
More
More
Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants.
Lubricants that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
WD-40 stops squeaks, frees sticky mechanisms, loosens rusted parts, protects against corrosion, and displaces moisture.Optional spray bottle can be refilled with WD-40 from a can or drum.
LPS No. 1 Greaseless dries to form a lubricating film that resists dust, dirt, and oil. LPS No. 2 Industrial Strength leaves an oily film for long-lasting lubrication with up to a year of corrosion resistance.
CRC 3-36 cleans, lubricates, and displaces moisture. It forms a clear, thin film that protects against wear and corrosion.
Container | Each | ||||
---|---|---|---|---|---|
Size | Type | Temp. Range, °F | Cannot Be Sold To | Each | |
CRC 3-36 | |||||
5 gal. | Drum | -50° to 250° | Canada | 0000000 | 0000000 |
These lubricants reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. They are chlorine free for use where chlorine waste disposal is a concern.
Lubricants for use with cast iron, stainless steel, and steel will stain other metal. Use them at full strength or blended with other oil.
Use LPS Tapmatic lubricants at full strength. Tapmatic Natural is based on natural oil. It’s designed for use on steel and aluminum, but can be used on all metal. It is sulfur free.
Lubricants that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container | Each | ||||
---|---|---|---|---|---|
Size | Type | Compatible With | Cannot Be Sold To | Each | |
LPS Tapmatic Natural | |||||
5 gal. | Drum | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | Canada | 0000000 | 0000000 |
Apply this oil to sheet metal up to 0.025” thick before stamping or drawing to extend die life. It quickly evaporates, leaving behind a thin, easy-to-clean film. It is chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength. It cannot be sold to the regions listed due to regulatory limits on VOC (volatile organic compounds).
Container | Each | ||||
---|---|---|---|---|---|
Size, gal. | Type | Compatible With | Cannot Be Sold To | Each | |
5 | Drum | Aluminum, Brass, Carbide, Cast Iron, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 000000 |
55 | Drum | Aluminum, Brass, Carbide, Cast Iron, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 000000 |
For air-powered tools in food-processing and preparation areas, this oil prevents corrosion and has wear-resistant and extreme-pressure properties. It absorbs water to reduce condensation and prevent buildup.
Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
Oil that is NSF registered H1 and oil that meets FDA 21 CFR 178.3570 are rated for incidental contact with food.
Mineral oil is derived from petroleum. Vegetable oil is slicker than mineral oil but also breaks down more quickly.
Viscosity Grade | Container | Each | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
ISO | SAE | SSU | Size | Type | Temp. Range, °F | Color | With Detergent | Specifications Met | Each | |
Mineral Base Oil | ||||||||||
22 | 7W | 100 @ 100° F | 55 gal. | Drum | -30° to 380° | Clear | No | NSF Registered H1 | 00000000 | 000000000 |
Vegetable Base Oil | ||||||||||
10 | Not Rated | 70 @ 100° F | 55 gal. | Drum | -20° to 290° | Clear | No | NSF Registered H1, NSF Registered H2 | 00000000 | 00000000 |
22 | 8 | 110 @ 100° F | 55 gal. | Drum | -40° to 420° | Clear | No | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | 00000000 | 00000000 |
32 | 20 | 140 @ 100° F | 55 gal. | Drum | -20° to 440° | Clear | No | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | 00000000 | 00000000 |
Synthetic Base Oil | ||||||||||
22 | 5W | 115 @ 100° F | 55 gal. | Drum | -80° to 420° | White | No | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | 00000000 | 00000000 |
Wear-resistant properties keep hydraulic pumps and equipment working, even in high-pressure systems.
Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
Viscosity Grade | Container | Each | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
ISO | AGMA | SAE | SSU | Size, gal. | Type | Temp. Range, °F | Color | With Detergent | Each | |
Mineral Base Oil | ||||||||||
32 | __ | 10W | 155 @ 100° F | 55 | Drum | -20° to 150° F | Amber | No | 0000000 | 0000000 |
46 | 1 | 10 | 215 @ 100° F | 55 | Drum | -20° to 150° F | Amber | No | 0000000 | 000000 |
68 | 2 | 20 | 325 @ 100° F | 55 | Drum | -20° to 150° F | Amber | No | 0000000 | 000000 |
100 | 3 | 30 | 525 @ 100° F | 55 | Drum | -10° to 150° F | Amber | No | 0000000 | 000000 |
Reduce wear on rings, cylinders, and other moving parts in most major manufacturers' air compressors.
Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
Synthetic oil lasts longer than mineral oil and withstands a wider range of temperatures.
Viscosity Grade | Container | Each | |||||||
---|---|---|---|---|---|---|---|---|---|
ISO | SAE | SSU | Size, gal. | Type | Temp. Range, °F | Color | With Detergent | Each | |
Mobil Rarus 824—Synthetic Base Oil | |||||||||
32 | 10 | 135 @ 100° F | 5 | Drum | -45° to 250° | Yellow | No | 0000000 | 0000000 |
Made of graphite, these powders and flakes lubricate under heavy loads and high temperatures. They resist most chemicals and conduct heat and electricity.
Powder lubricants get into hard-to-reach spots, such as locking mechanisms and fastener threads, better than flakes. Lubricant in a can and drum can be used dry or mixed with oil and grease to increase their load-carrying capacity or improve their ability to conduct heat and electricity.
Container | Each | |||||
---|---|---|---|---|---|---|
Size | Type | Additive | Temp. Range, °F | Color | Each | |
Powder Lubricant | ||||||
50 lbs. | Drum | Graphite | -300° to 700° | Silver | 0000000 | 0000000 |
For controlled cooling, use quenching oil instead of water to minimize cracking and distortion after heat treating parts and tools. It's nonstaining and chlorine and sulfur free. Use full strength.