This thin lubricant penetrates into tight spaces, and nano-sized additives fill small surface imperfections, reducing wear and heat and extending the life of both the lubricant and equipment.

For use in food-processing and preparation areas, these thin, multipurpose lubricants are NSF registered H1 or FDA compliant for incidental food contact.

Protect food-processing and preparation equipment while limiting environmental impact. These multipurpose lubricants are NSF registered H1 for incidental food contact and are rated to quickly break down in water.

For use in food-processing and preparation areas, use these lubricants to cut through dirt, grease, and rust, and to protect chain and other moving metal parts.

These lubricants foam when applied, so they don’t drip while sinking into roller chain and other moving metal parts. They dry to form a film that prevents dust, dirt, and corrosion.

Spray these lubricants onto wire rope and cable used in vertical or fast-moving applications. They dispense as a thick gel, completely covering wire strands without dripping or running off. Use them to cut through dirt, grease, and rust, and to protect wire rope and cable.

By traveling along individual strands and penetrating to the core of wire rope and cable, these lubricants maximize coverage to prevent rust and reduce wear. They cut through dirt, grease, and rust to protect wire rope and cable.

Protect electrical components—these lubricants insulate and block moisture, preventing electrical malfunctions. They cut through dirt, grease, and rust to clean connections and relays, leaving behind a thin film for long-lasting protection.

Thickened with silica, this heavy grease clings to parts so it won't wash off in wet environments.

Fluorocarbon and fluorinated polymer thickeners add chemical resistance to this grease. It remains intact when exposed to water and most solvents and chemicals.

This grease meets NSF/ANSI Standard 51 and FDA 21 CFR 175.300 for direct contact with food and NSF/ANSI Standard 61 for use with components that come into contact with drinking water.

This grease remains stable and in place under high pressure, heavy loads, and shock loads. It's often used for demanding mining, construction, and automotive applications.

Protect equipment while limiting environmental impact. This grease breaks down quickly in water.

Nano-sized additives penetrate small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. It's formulated to adhere to metal parts and to stay in place in wet environments.

Protect equipment while having a limited impact on the environment. This grease resists moisture but still breaks down quickly in water.

Brush on most metal surfaces to provide a layer of protection against corrosion.

For use in applications where acids, bases, oxidizers, and fuels are present.

This grease remains stable and in place under high pressure, heavy loads, and shock loads. It is NSF registered H1 and FDA compliant for incidental food contact. It's often used to lubricate heavy-duty food production equipment.

This grease comes in cartridges that only work with our Controlled-Use Food-Grade Lever-Grip Grease Guns to make sure that the right grease is used in food-processing areas. It is NSF registered H1 for incidental food contact.

Also known as spindle grease, use this in machine tools and other high-speed applications.

Able to handle light to moderate loads at high speeds, this grease is often used on electric motor bearings for fans, pumps, and dryers.

Lubricate ball and roller bearings for high-load applications in wet environments, such as water processing, steel mills, and mining.

Lubricate ball and roller bearings for high-load applications. Often used on food-processing equipment, generators, and furnace door hinges, this grease is NSF registered H1 and meets FDA Compliant 21 CFR 178.3570 for incidental food contact.

Also known as dielectric grease, use insulating grease to lubricate and protect electrical systems.

A high silver content gives this grease excellent conductivity for applications where electricity and heat transfer are required.

Made with moisture-resistant thickeners, this grease resists washing off and reduces corrosion in wet environments while still lubricating under heavy loads.

Made with moisture-resistant aluminum thickener, this grease resists washing off and reduces corrosion in wet environments while still lubricating under heavy loads. It is NSF registered H1 for incidental food contact.

Made with moisture-resistant thickener, this grease resists washing off and reduces corrosion and oxidation in wet environments.

Prevent wear and corrosion to keep carriages, guide rails, slides, tracks, and ways fast and accurate.

Micro vibrations caused by surface imperfections on carriage bearings can affect precision. This grease fills in those imperfections so carriages roll smoothly.

Highly pure, this grease won't contaminate sensitive environments, so it can be used in clean rooms.

Specifically designed for use with air-powered impact wrenches, this grease withstands high pressure and heavy loads and prolongs tool life.

Lithium thickener allows this grease to withstand over 30% more pressure than our standard ball screw grease.

These general purpose lubricants reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life.

A high sulfur concentration provides the lubricity required to protect tools and stainless steel work surfaces, but these lubricants will stain other metal. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier.

Use these lubricants for easier and faster tapping, cutting, and threading of hard and thick material. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life.

Formulated for use on soft metal, such as aluminum, copper, and brass, these lubricants won’t stain. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life.

Apply these lubricants to abrasive belts and wheels to extend their life and improve ground glass surface finishes. They lubricate the abrasive surface for faster and easier cutting cycles. They won’t stain metal, so they can be used as general purpose grinding fluids.

Spray these lubricants on saw blades and drill bits to make cutting easier and extend the life of your tool. They protect tools from sap, reducing cleaning time. Made without silicone or petroleum, they won’t stain wood or interfere with glue or finishes.

These electrical discharge machining (EDM) lubricants resist oxidation, so they last longer and extend the life of your electrode. They're clear for workpiece visibility.

Designed for use with misting systems, these coolants have excellent cooling properties for intermittent machine cycles when milling and turning.

Apply just a few drops of these coolants to your cutting tools before and during milling and machining to reduce heat with very little cleanup.

For use with micro-drop dispensers, these coolants are mixed with air to create small, controlled droplets that dissipate heat and are easy to clean up. Use for small jobs.

For general-purpose grinding, sanding, and finishing, these coolants prevent material from building up to ensure a high-quality finish and preserve tool life.

Remove heat from long machining cycles with hard metal. These coolants prevent workpiece corrosion and distortion to improve cutting accuracy.

Use these coolants in drawing, stamping, and forming applications with all metal. They protect both dies and cutting edges as well as finished workpieces.

Weld longer without damaging your torch—replace the water in your welding cooler with these coolants to prevent mineral deposits and frozen lines. Coolants also tolerate colder temperatures than water. For use with MIG, TIG, spot, and stud welders. They are nonconductive.

Nano-sized additives fill small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. These lubricants dry to form a nonstick film that won’t attract dust. They are often used on hinges, gears, and roller chain.

A high load-carrying capacity makes these lubricants good for use on chain and moving metal parts. They dry to form a film that lubricates without attracting dust.

Spray these wear-resistant lubricants on rollers, hinges, and tracks of overhead doors to reduce friction and noise. PTFE provides excellent lubricity, while silicone repels water for use outdoors. Once dry, these lubricants form a thin lubricating layer that won’t rub off or attract dust.

Made of graphite in a thin oil, these lubricants penetrate wire rope and cable to the core. When the oil evaporates, it leaves behind a dry film of graphite that prevents wear and corrosion throughout the rope without attracting dust.

This oil is chemically inert and long lasting with an indefinite shelf life.

Use this oil in food-processing and preparation areas.

Thin enough to penetrate inside chain pins and links, yet tacky so it stays in place, use this oil to lubricate chain and roller chain.

This oil withstands the heavy loads found in gears and gear-drive systems. Use it in food-processing and preparation areas where incidental contact with food is possible.

Keep air-powered tools running longer. This oil prevents corrosion and has wear-resistant and extreme-pressure properties. It absorbs water to reduce condensation and prevent buildup.

Wear-resistant properties keep hydraulic pumps and equipment working, even in high-pressure systems.

Protect equipment while having a limited impact on the environment. This oil breaks down quickly in water.

Use this oil in machines that require the same lubricant for both their hydraulic and way systems. Antiwear and oxidation-resistant additives make it work well with hydraulic systems, while moly gives it the high load-carrying ability required by way systems.

For use in food-processing and preparation areas, this oil is NSF registered H1 or meets FDA 21 CFR 178.3570 for incidental food contact.

Designed to soak into small spaces, this thin oil keeps delicate instruments running smoothly.

Reduce wear on rings, cylinders, and other moving parts in most major manufacturers' air compressors.

Designed to flow well at extremely low temperatures, use this oil with ammonia refrigeration compressors. It won't mix with refrigerant.

Add this stabilizer to your gas tank to keep fuel fresh when stored for long periods.

These fluids meet Ford and General Motors (Dexron III) specifications for automatic transmission fluids. They can also be used as power steering fluid and compressor fluid.

Also known as flushing fluids, these additives provide wear resistance while flushing and cleaning hydraulic systems, gear boxes, compressors, and other equipment.

Also known as spindle oil, this thin oil penetrates tight spaces and forms a light film to lubricate angular bearings used in machine tools and other high-speed applications.

Primarily for use in automotive applications, this oil also works well with most machinery.

For long-lasting lubrication in vacuum pumps, this oil is slow to evaporate.

Free of metal particles, these lubricants won’t react with stainless steel. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Corrosion-resistant additives allow these lubricants to prevent parts from locking together in caustic environments, such as steel mills and power plants.

Often used with engine bolts and heavily-loaded, slow-moving gears, these lubricants are formulated with moly (molybdenum disulfide) to prevent parts from locking together under high loads and pressure.

Copper allows these lubricants to conduct electricity, while graphite gives them good chemical and corrosion resistance. Use them to prevent threaded fasteners and close-fitting parts from locking together in connections where you need to conduct electricity.

Use these lubricants to prevent threaded fasteners and close-fitting parts in food-processing and preparation areas from locking together. They're NSF registered H1 for incidental food contact.

Prevent bulbs from sticking in sockets. Apply a thin coating of these lubricants with a cloth or your finger to the bulb's base before installation. They won't run, drip, or harden. Use with any kind of light bulb.

For hoses and other tight-fitting parts, apply these lubricants to rubber or plastic before assembling and disassembling. After drying, they lose their lubricity, so parts stay together. They leave no residue on assembled parts.

Made of 98% moly, this lubricant withstands pressure up to 500,000 psi and has excellent wear resistance. Apply it to metal surfaces to prevent parts from corroding or sticking.

Use these lubricants to release large, intricate, or difficult-to-release parts. Also known as paintable mold-release lubricants, they don’t leave a residue, so you can paint or finish the molded part without the need to clean it. They allow you to easily remove cast parts and prevent sticking, stretching, and tearing.

Also known as paintable mold-release lubricants, these lubricants don’t leave a residue, so you can paint or finish the molded part without the need to clean it. Use them for molding and casting parts in food-processing and preparation areas, or when molding parts that will be used around food. They allow you to easily remove cast parts and prevent sticking, stretching, and tearing.

When mixed into coatings, resins, polymers, and metals, these fillers enhance strength, conductivity, lubricity, and other physical properties.

Often used as a safe alternative to mercury in thermometers, thermostats, and switches, these gallium alloys are also good for transferring heat and electricity in soft electronics that must bend and flex.