Locate buried ferrous and nonferrous metal objects in soil, asphalt, and concrete up to two feet underground.

Designed for use in food-processing environments, these squeegees have a channel-free blade that prevents debris from getting stuck inside.

Made with metal and chemical additives, the bristles and handles on these brushes won’t get past metal detectors or X-ray machines in your food facility.

Scrub out kettles, fryers, and other equipment without fear of contaminating food lines—these pads set off your metal detector if they fall into your line.

Clean hard-to-reach areas in pharmaceutical and food-processing plants—these scrub brushes have metal and chemical additives that set off metal detectors and show up on an X-ray if they fall into your line.

Use in food-processing environments for cutting surfaces, liners, and other high-wear applications. These sheets and strips are FDA compliant for direct contact with food.

FDA compliant for direct contact with food, these balls are often used to clean screens in vibrating sifters in food, beverage, and other sanitary environments. You can also use them as seals in pumps and check valves.

Locate metal studs.

These handles are often used as grips on hand wheels or cranks to operate machinery around food processing lines without the risk of contaminating the food. Install them on a threaded stud.

Position, tighten, and hold fixtures, equipment, and machinery near food processing lines without the risk of contaminating the food. Install these knobs on a threaded stud.

Made for use in food processing facilities, these plastic knobs have a metal additive that sets off metal detectors if a piece breaks off into your line.

Keep your hair out of the way to prevent stray hairs from contaminating food.

Keep workers clean and protected from spills and splashes on food processing lines while reducing the risk of contaminating the food.

The curved design sits close to your face for better protection from debris.

Protect your eyes and face from particles and light debris in food industry environments.

Use these sleeves alone or with gloves to protect your arms.

These gloves have a metal additive that will set off metal detectors if they fall into your line, so you can safely handle food and tools in a sanitary facility.

Designed for use in the food industry and other applications where detection and retrieval are essential, these clips are made of metal-detector-grade plastic. Wear on a belt loop to keep your gloves close at hand.

Good for food preparation areas, these earplugs have an enclosed ball bearing that can be sensed by metal detectors.

Organize and access masks safely near your line in food and pharmaceutical plants.

If a chip of this material breaks off, it can be located by metal detectors to reduce contamination risks.

Common in food and pharmaceutical plants, these PEEK sheets and bars help you identify contaminated batches.

Label totes, ingredient bags, racks, and other items to keep your food processing plant organized. These tags are laminated with aluminum, so they’ll set off metal detectors if they fall into your line.

Seal valves, latches, containers, and other devices with these traceable, tamper-evident tags, which are designed for food, pharmaceutical, and other sanitary environments.

Clearly identify staff and visitors in sanitary areas with these name badge sleeves—they have a metal additive that will set off metal detectors if they fall into your food line.

To limit the spread of illness by helping people social distance, these decals have brightly-colored symbols and text that make them easy to see and understand.

Use these plastic mounts with metal-detector-grade cable ties when detection and retrieval is essential, such as in food processing applications. Mounts are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

Press these cups onto unthreaded fittings on your vacuum system to pick up sanitary items with curves, corners, and uneven surfaces.

Thread these cups onto your vacuum system to lift and move sanitary items with curves, corners, and uneven surfaces.

Grip, lift, and move food as well as other items with curves, angles, and varied heights in food-processing plants. All of these lifters have a flexible balloon-like cup that’s made of FDA-compliant silicone rubber, so they’re safe for direct contact with food.

Use these belt scrapers to remove debris from conveyor belts. If a chip of this blade breaks off near a process line, it can be located by metal detectors to reduce contamination risks in food processing applications.

Made with metal and chemical additives, these calculators trigger metal detectors and X-rays if they fall into your food line, helping you comply with Hazard Analysis and Critical Control Point (HACCP) programs for food safety.

Bundle products in food plants while reducing the chance of contaminating the food.

Commonly used in food processing facilities, these pens are made of a plastic that can be detected with a metal-sensing device.

For touchscreen devices near food lines, these pens write without scratching or smudging your screen and have additives to trigger metal detectors and X-rays if dropped in your batch.

Blades are enclosed to protect your fingers.

Track time on food processing lines while reducing the risk of contaminating the food. To help you comply with Hazard Analysis and Critical Control Point (HACCP) programs, these plastic stopwatches contain metal and chemical additives that will set off metal detectors and show up on X-ray machines.

Silicone with a metal additive, this tubing routes liquids and ingredients as hot as 390° F through your food plant and is caught by metal detectors if a piece falls into your line.

For easier viewing than dial thermometers for food and beverage, these thermometers show readings on an LCD. All meet standards for use in food-processing environments.

If a piece wears off, fragments as small as 1 mm can be picked up by a metal-detection system to prevent contamination of your process line.

Made from a blend of PTFE and 316 stainless steel, these gaskets hold up to the harsh chemicals, high pressures, and high temperatures used in sanitary processes.

If a piece wears off, fragments as small as 1 mm can be picked up by a metal-detection system to prevent contamination of your process line.

Often used in food-processing applications, these plastic pails can be located using metal detectors.

Scoop, measure, and pour without fear of contaminating your food line. A metal additive in the plastic can be picked up by a metal detector, and a chemical additive will show up on X-ray, so you can find them if they fall into your line.

Spray liquids around your food processing plant while reducing the risk of contaminating the food. These spray bottles have metal additives in the spray head and on the label that can be picked up by a metal detector if the bottles—or any piece of the spray head or label—fall into your line.

Measure ingredients for your food processing line.

If these O-rings deteriorate, they can be picked up by metal detection systems.

Create round-profile O-rings for sealing applications near ovens and other hot areas in your food plant.