Capacity Capacity |
|---|
|
Power Source Power Source |
|---|
|
For Use With For Use With |
|---|
|
Mount Type Mount Type |
|---|
|
For Use On For Use On |
|---|
|
Power Power |
|---|
|
Motor Type Motor Type |
|---|
|
Propeller Material Propeller Material |
|---|
|
Shaft Material Shaft Material |
|---|
|
Mixer Speed Mixer Speed |
|---|
|
For Drum Opening Size For Drum Opening Size |
|---|
|
Air Connection Thread Type Air Connection Thread Type |
|---|
|
Air Connection Type Air Connection Type |
|---|
 | Pipe |
Direction of Operation Direction of Operation |
|---|
|
Propeller Type Propeller Type |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Air Connection Gender Air Connection Gender |
|---|
|
Air Consumption Air Consumption |
|---|
|
About Selecting a Mixer
More
Thread-In Air-Powered Mixers for Drums
Thread these mixers into a drum opening for a secure connection. All of the propellers are left hand and move clockwise when viewed from above to direct flow downward for efficient mixing. Adjust the mixing speed with a needle valve.
Mixers with 1 or 4 propellers have collapsible propellers to fit through 55-gallon drums with a NPT opening size of 2, so there's no need to remove the lid.
Direct-drive mixers operate at high speeds for rapid tank turnover.
Gear-drive mixers turn propellers at low speeds.
Use mixers for thin liquids to blend liquids with a viscosity similar to water and light oils.
Use mixers for thick liquids to blend liquids with a viscosity similar to honey and molasses. They have welded propellers for faster, more thorough mixing than those with set-screw propellers.
Propellers | Shaft | Air Connection | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Pipe Size  | Thread Type | Gender | Air Consumption | O'all Ht. | Wt., lbs. | Each | |
Direct Drive | ||||||||||||||
For Thin Liquids | ||||||||||||||
| 1/2 | 300-1,750 | 1 | 3 3/4" | 316 Stainless Steel | 29" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 39 5/8" | 29 | 00000000 | 000000000 |
For Thick Liquids | ||||||||||||||
| 1/2 | 300-1,750 | 3 | 2" | 316 Stainless Steel | 30" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 60" | 35 | 000000000 | 00000000 |
| 1 | 300-1,750 | 3 | 2" | 316 Stainless Steel | 30" | 5/8" | 1/2 | NPT | Female | 59 cfm @ 80 psi | 60" | 35 | 000000000 | 00000000 |
Gear Drive | ||||||||||||||
For Thick Liquids | ||||||||||||||
| 1/2 | 300-1,750 | 4 | 3 3/4" | 316 Stainless Steel | 30" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 51 5/8" | 35 | 000000000 | 00000000 |
| 1 | 300-1,750 | 4 | 3 3/4" | 316 Stainless Steel | 30" | 5/8" | 1/2 | NPT | Female | 59 cfm @ 80 psi | 51 5/8" | 35 | 000000000 | 00000000 |
| Includes | Each | |
| Body Gasket, Dead End Bearing, Drive End Bearing, Gasket End Cap, Push Pin, Shaft Seal, Vane, Vane Spring | 0000000 | 0000000 |