Rated NEMA 6P and IP68, these switches are protected against corrosion, washdowns, and temporary submersion. Apply pressure from any direction to actuate.

Apply pressure from any direction to actuate these switches.

Switches with a three-prong outlet let you plug a device directly into the switch.

Operate these switches hands-free when working in damp or humid environments. They’re IP and NEMA rated, so they won’t corrode when exposed to water, oil, or coolant spray.

Switches without a guard are unobstructed and let you press them from multiple angles. Switches with a guard shield the pedal so you don't accidentally step on it and activate the switch. Switches with an oversized guard fit bulky shoes and toe guards.

Two-speed switches have two contact points. Push the pedal halfway down for the slow speed or all the way down for the high speed.

Switches with a safety lever lock the pedal in place to prevent accidental activation. Fully insert your foot to release the safety lever. If the lever isn't released, the pedal won't depress.

Add an optional oversized guard to switches with or without a standard guard to shield the pedal from getting pressed by accident and to accommodate bulky shoes. Or, replace an existing oversized guard.

Activate equipment from up to 40 feet away—these switches include a transmitter and a receiver that connects to equipment. The transmitter is rated IP68 and the receiver is rated IP01.

Send signals to equipment up to 130 feet away. Because these foot switches are self-powered, they eliminate the clutter of wires and the fuss of batteries. Connect up to 40 switches to one receiver to set up an automation system that spans your whole facility.

These switches meet EN 60947-5-1, a European safety standard for switches.

Orange switches are easy to spot, reducing the risk you might trip on them.

Step on these switches to actuate a process hands-free in an area with frequent washdowns. Rated NEMA 6P, 13, and IP68, they protect against corrosion, washdowns, temporary submersion, and oil/coolant spraying. Made of aluminum, they resist corrosion better than iron and steel switches.

Switches without a guard let you easily see the pedal and step on it from many angles.

Switches with a guard shield the pedal from getting accidentally pressed down.

Use these switches for intermittent, light duty applications.

IP20 rated switches are suitable for use in dry, indoor environments such as offices or warehouses where there is minimal risk of water exposure.

IP43 rated switches can be used in industrial kitchen settings or around machinery where light water spray might occur.

These switches are rated for environments where hazardous material is present. Press the pedal with your foot for hands-free operation. They have an oversized guard that accommodates bulky footwear.

Hazardous location environmental ratings indicate whether manufacturers have included safety features in products to facilitate their safe use in a hazardous environment. Before selecting a product for a hazardous location, ensure it is rated for your environment. See About Hazardous Location Environmental Ratings.

When the pedal is pressed, the built-in potentiometer adjusts the resistance to vary the speed for motor drives. These switches can be wired to either increase or decrease the current when actuated. All are rated NEMA 4 and 13 for protection from washdowns and oil/coolant spraying.

To prevent accidents, these switches won’t let your machine start running unless two people in different locations coordinate control. This is useful for large operations where it would be difficult to hear or see someone call for power to be cut. They come with two foot switches that communicate wirelessly—both need to be pressed at the same time for your machine to run. For example, if used with a machine that pulls wire up a building through conduit, this means that two people dozens of floors apart can each stop the machine by releasing their foot. As an extra precaution, give the included pendant switches to people walking around your operation. If they see a problem, the pendant switches shut power off with a push of a button, even if the foot switches are pressed.

The foot switches work up to 3.7 miles away from each other if there’s a clear line of sight between the two. If there are walls or other obstacles, they work up to 1,500 ft. away from each other. Plug your equipment into the receiver foot switch before plugging the switch into an outlet—no wiring is required.