Washer Type Washer Type |
|---|
 |  |
| Standard | Tooth Lock |
Flange Diameter (D) Flange Diameter (D) |
|---|
|
|
|
Specifications Met Specifications Met |
|---|
For Maximum Material Thickness For MaximumMaterial Thickness |
|---|
|
Depth Under Flange (F) Depth Under Flange (F) |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Fabric Grommets
Press these grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material. Use a cutting punch (sold separately) to create the hole, then set the grommet using either an installation punch or a press (both sold separately). Trade size refers to the hole size and the size of the installation tool needed. All of these grommets can be used outdoors.
Grommets with a tooth lock washer keep material from loosening and rotating better than those with a standard washer.
Grommets that meet MIL-G-16491D, NASM20230, and AN230 adhere to military dimensional standards.
Brass grommets are strong and have good corrosion resistance. Nickel-plated brass grommets have more corrosion resistance than brass grommets.
Hammer-driven cutting punches create holes for installing grommets when you strike them with a wooden or rawhide mallet. Hammer-driven installation punches set grommets in a hole when you strike them with a wooden or rawhide mallet. Manual presses set grommets in a hole when you squeeze the adjustable pliers-grip handle. Requires a die set (sold separately).
For technical drawings and 3-D models, click on a part number.
| Trade Size | For Max. Material Thick. | ID (C) | Flange Dia. (D) | Dp. Under Flange (F) | For Use Outdoors | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 00 | 0.063" | 3/16" | 0.425" | 0.135" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
| 0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
| 1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
| 2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
| 3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
| 4 | 0.298" | 1/2" | 1.05" | 0.374" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
| 5 | 0.254" | 5/8" | 1.22" | 0.33" | Yes | MIL-G-16491D, NASM20230, AN230 | 25 | 0000000 | 0000 |
| 6 | 0.149" | 13/16" | 1.75" | 0.232" | Yes | MIL-G-16491D, NASM20230, AN230 | 10 | 0000000 | 00000 |
Nickel-Plated Brass | |||||||||
| 00 | 0.063" | 3/16" | 0.425" | 0.135" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 50 | 00000000 | 0000 |
| 0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 50 | 00000000 | 0000 |
| 1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 50 | 00000000 | 0000 |
| 2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 50 | 00000000 | 0000 |
| 3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 50 | 00000000 | 00000 |
| 4 | 0.298" | 1/2" | 1.05" | 0.374" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 25 | 00000000 | 0000 |
| 5 | 0.254" | 5/8" | 1.22" | 0.33" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 25 | 00000000 | 00000 |
| 6 | 0.149" | 13/16" | 1.75" | 0.232" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 10 | 00000000 | 00000 |
| Trade Size | For Max. Material Thick. | ID (C) | Flange Dia. (D) | Dp. Under Flange (F) | For Use Outdoors | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
| 1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
| 2 | 0.141" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
| 3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
| 4 | 0.295" | 1/2" | 1.05" | 0.374" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
| 5 | 0.251" | 5/8" | 1.22" | 0.33" | Yes | MIL-G-16491D, NASM20230, AN230 | 25 | 0000000 | 00000 |
Nickel-Plated Brass | |||||||||
| 0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
| 1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
| 2 | 0.141" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
| 3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491D, NASM20230, AN230 | 25 | 0000000 | 0000 |
Throat | |||||
|---|---|---|---|---|---|
| Max. Opening | Dp. | Wd. | Material | Each | |
| 7/8" | 3 1/4" | 1 3/4" | Aluminum | 000000000 | 0000000 |
Fabric Grommet Kits
Kits include grommets, a cutting punch, a cutting block, an installation punch, and a die set. Use them to create a way to run rope and cable through tarps, covers, and curtains. Press the grommets into a hole you've already cut. They can also be used to strengthen and prevent existing holes from fraying in material. Use the cutting punch to create the hole, then set the grommet using the installation punch and die set. Made of brass, all of these grommets are strong and have good corrosion resistance. They adhere to military dimensional standard MIL-G-16491f. They can also be used outdoors.
Grommets with a tooth lock washer keep material from loosening and rotating better than those with a standard washer.
For technical drawings and 3-D models, click on a part number.
| Trade Size | For Max. Material Thick. | ID (C) | Flange Dia. (D) | Dp. Under Flange (F) | For Use Outdoors | Specifications Met | Includes | No. of Grommets | Each | |
Grommets with Standard Washer | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Brass | ||||||||||
| 0 | 0.1" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491F | Cutting Punch, Cutting Block, Installation Punch, Die Set | 24 | 0000000 | 00000 |
| 1 | 0.1" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491F | Cutting Punch, Cutting Block, Installation Punch, Die Set | 24 | 0000000 | 00000 |
| 2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491F | Cutting Punch, Cutting Block, Installation Punch, Die Set | 24 | 0000000 | 00000 |
| 3 | 0.21" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491F | Cutting Punch, Cutting Block, Installation Punch, Die Set | 12 | 0000000 | 00000 |
| 4 | 0.29" | 1/2" | 1.05" | 0.374" | Yes | MIL-G-16491F | Cutting Punch, Cutting Block, Installation Punch, Die Set | 12 | 0000000 | 00000 |
Grommets with Tooth Lock Washer | ||||||||||
Brass | ||||||||||
| 0 | 0.11" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491F | Cutting Punch, Cutting Block, Installation Punch, Die Set | 48 | 0000000 | 00000 |
| 1 | 0.12" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491F | Cutting Punch, Cutting Block, Installation Punch, Die Set | 48 | 0000000 | 00000 |
| 2 | 0.15" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491F | Cutting Punch, Cutting Block, Installation Punch, Die Set | 24 | 0000000 | 00000 |
| 3 | 0.23" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491F | Cutting Punch, Cutting Block, Installation Punch, Die Set | 24 | 0000000 | 00000 |
| 4 | 0.3" | 1/2" | 1.05" | 0.374" | Yes | MIL-G-16491F | Cutting Punch, Cutting Block, Installation Punch, Die Set | 24 | 0000000 | 00000 |
Rolled-Rim Reinforcing Fabric Grommets
A rolled rim provides added grip while the elongated neck and teeth on the washer, also known as a spur washer, add reinforcement and reduce rotation so you can use these grommets in thick materials such as canvas. Press the grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material. Use a cutting punch (sold separately) to create the hole, then set the grommet using either an installation punch or a press (both sold separately). Trade size refers to the hole size and the size of the installation tool needed. All of these grommets can be used outdoors.
Grommets with a tooth lock washer keep material from loosening and rotating better than those with a standard washer.
Grommets that meet MIL-G-16491D, NASM20230, and AN230 adhere to military dimensional standards.
Brass grommets are strong and have good corrosion resistance. Nickel-plated brass grommets have more corrosion resistance than brass grommets.
Hammer-driven cutting punches create holes for installing grommets when you strike them with a wooden or rawhide mallet. Hammer-driven installation punches set grommets in a hole when you strike them with a wooden or rawhide mallet. Manual presses set grommets in a hole when you squeeze the adjustable pliers-grip handle. Requires a die set (sold separately).
For technical drawings and 3-D models, click on a part number.
| Trade Size | For Max. Material Thick. | ID (C) | Flange Dia. (D) | Dp. Under Flange (F) | For Use Outdoors | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0 | 0.096" | 9/32" | 0.67" | 0.175" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 000000 |
| 1 | 0.126" | 13/32" | 0.79" | 0.205" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
| 2 | 0.174" | 7/16" | 0.89" | 0.255" | Yes | MIL-G-16491D, NASM20230, AN230 | 25 | 0000000 | 0000 |
| 3 | 0.172" | 15/32" | 0.97" | 0.255" | Yes | MIL-G-16491D, NASM20230, AN230 | 25 | 0000000 | 00000 |
| 4 | 0.237" | 9/16" | 1.12" | 0.32" | Yes | MIL-G-16491D, NASM20230, AN230 | 25 | 0000000 | 00000 |
| 5 | 0.296" | 5/8" | 1.285" | 0.38" | Yes | MIL-G-16491D, NASM20230, AN230 | 10 | 0000000 | 0000 |
| 6 | 0.332" | 3/4" | 1.535" | 0.42" | Yes | MIL-G-16491D, NASM20230, AN230 | 5 | 0000000 | 0000 |
| 7 | 0.363" | 29/32" | 1.725" | 0.446" | Yes | MIL-G-16491D, NASM20230, AN230 | 5 | 0000000 | 00000 |
| 8 | 0.382" | 1 3/32" | 1.865" | 0.465" | Yes | MIL-G-16491D, NASM20230, AN230 | 5 | 0000000 | 00000 |
Nickel-Plated Brass | |||||||||
| 0 | 0.096" | 9/32" | 0.67" | 0.175" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 50 | 00000000 | 00000 |
| 1 | 0.126" | 13/32" | 0.79" | 0.205" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 25 | 00000000 | 0000 |
| 2 | 0.174" | 7/16" | 0.89" | 0.255" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 25 | 00000000 | 0000 |
| 3 | 0.172" | 15/32" | 0.97" | 0.255" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 25 | 00000000 | 00000 |
| 4 | 0.237" | 9/16" | 1.12" | 0.32" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 10 | 00000000 | 0000 |
| 5 | 0.296" | 5/8" | 1.285" | 0.38" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 10 | 00000000 | 0000 |
| 6 | 0.332" | 3/4" | 1.535" | 0.42" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 5 | 00000000 | 0000 |
| 7 | 0.363" | 29/32" | 1.725" | 0.446" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 5 | 00000000 | 00000 |
| 8 | 0.382" | 1 3/32" | 1.865" | 0.465" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 5 | 00000000 | 00000 |
Throat | |||||
|---|---|---|---|---|---|
| Max. Opening | Dp. | Wd. | Material | Each | |
| 7/8" | 3 1/4" | 1 3/4" | Aluminum | 000000000 | 0000000 |
Reinforcing Fabric Grommets
The extended neck on the washer of these grommets adds reinforcement so you can use them in thicker material such as woven fabrics. Press them into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material. Use a cutting punch (sold separately) to create the hole, then set the grommet using either an installation punch or a press (both sold separately). Trade size refers to the hole size and the size of the installation tool needed. All of these grommets adhere to military dimensional standards MIL-G-16491D, NASM20230, and AN230. They can be used outdoors.
Brass grommets are strong and have good corrosion resistance. Nickel-plated brass grommets have more corrosion resistance than brass grommets.
Hammer-driven cutting punches create holes for installing grommets when you strike them with a wooden or rawhide mallet. Hammer-driven installation punches set grommets in a hole when you strike them with a wooden or rawhide mallet. Manual presses set grommets in a hole when you squeeze the adjustable pliers-grip handle. Requires a die set (sold separately).
For technical drawings and 3-D models, click on a part number.
| Trade Size | For Max. Material Thick. | ID (C) | Flange Dia. (D) | Dp. Under Flange (F) | For Use Outdoors | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 00 | 0.062" | 3/16" | 0.425" | 0.135" | Yes | MIL-G-16491D, NASM20230, AN230, NASM16491 | 50 | 0000000 | 00000 |
| 0 | 0.102" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491D, NASM20230, AN230, NASM16491 | 50 | 0000000 | 0000 |
| 1 | 0.112" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491D, NASM20230, AN230, NASM16491 | 50 | 0000000 | 0000 |
| 2 | 0.139" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491D, NASM20230, AN230, NASM16491 | 50 | 0000000 | 0000 |
| 3 | 0.218" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491D, NASM20230, AN230, NASM16491 | 50 | 0000000 | 00000 |
| 4 | 0.296" | 1/2" | 1.05" | 0.374" | Yes | MIL-G-16491D, NASM20230, AN230, NASM16491 | 25 | 0000000 | 0000 |
Nickel-Plated Brass | |||||||||
| 00 | 0.062" | 3/16" | 0.425" | 0.135" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
| 0 | 0.102" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
| 1 | 0.112" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
| 2 | 0.139" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
| 3 | 0.218" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491D, NASM20230, AN230 | 25 | 0000000 | 0000 |
Throat | |||||
|---|---|---|---|---|---|
| Max. Opening | Dp. | Wd. | Material | Each | |
| 7/8" | 3 1/4" | 1 3/4" | Aluminum | 000000000 | 0000000 |