Search Results
For Use On For Use On |
|---|
|
Size Size |
|---|
Decimal Size Equivalent Decimal Size Equivalent |
|---|
|
Individual/Set Individual/Set |
|---|
|
Finish Finish |
|---|
|
Material Material |
|---|
|
For Maximum Material Thickness For MaximumMaterial Thickness |
|---|
|
|
|
Overall Length Overall Length |
|---|
Body Diameter Body Diameter |
|---|
Step Diameter Step Diameter |
|---|
Shank Diameter Shank Diameter |
|---|
|
|
Container Type Container Type |
|---|
|
Diameter Rating Diameter Rating |
|---|
|
About Countersinks
Countersinks cut a cone-shaped opening to install screws and rivets flush with a surface or hold workpieces between centers on a lathe. They can also be used for chamfering and deburring.
More
About Drill Bits
More
Drill Bit Decimal Size Equivalents
More
High-Speed Steel Multidiameter Drill Bits
Titanium Nitride (TiN) Coated
Uncoated
Steps with progressively larger diameters let you drill a range of sizes with one bit. Also known as step drills.
Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated drill bits.
Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Decimal Size Equivalent | No. of Sizes | Overall Lg. | For Max. Material Thick. | Type | Size | Point Style | For Use On | Each | |
Inch | ||||||||||
Titanium-Nitride (TiN) Coated High-Speed Steel | ||||||||||
| 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2" | 0.125", 0.1563", 0.1875", 0.2188", 0.25", 0.2813", 0.3125", 0.3438", 0.375", 0.4063", 0.4375", 0.4688", 0.5" | 13 | 3 1/4" | 1/8" | Hex | 1/4" | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 000000 |
| 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" | 0.1875", 0.25", 0.3125", 0.375", 0.4375", 0.5" | 6 | 3 1/4" | 1/4" | Hex | 1/4" | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" | 0.1875", 0.25", 0.3125", 0.375", 0.4375", 0.5", 0.5625", 0.625", 0.6875", 0.75", 0.8125", 0.875" | 12 | 3" | 1/8" | Hex | 3/8" | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" | 0.25", 0.3125", 0.375", 0.4375", 0.5", 0.5625", 0.625", 0.6875", 0.75" | 9 | 2 5/8" | 1/8" | Hex | 3/8" | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 1/4", 7/8", 1 1/8" | 0.25", 0.875", 1.125" | 3 | 3" | 3/32" | Hex | 3/8" | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" | 0.5625", 0.625", 0.6875", 0.75", 0.8125", 0.875", 0.9375", 1" | 8 | 2 7/8" | 1/8" | Hex | 3/8" | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8" | 0.8125", 0.875", 0.9375", 1", 1.0625", 1.125", 1.1875", 1.25", 1.3125", 1.375" | 10 | 3" | 1/8" | Hex | 1/2" | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 000000 |
Uncoated High-Speed Steel | ||||||||||
| 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2" | 0.125", 0.1563", 0.1875", 0.2188", 0.25", 0.2813", 0.3125", 0.3438", 0.375", 0.4063", 0.4375", 0.4688", 0.5" | 13 | 3 1/4" | 1/8" | Hex | 1/4" | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 0000000 | 00000 |
| 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" | 0.1875", 0.25", 0.3125", 0.375", 0.4375", 0.5" | 6 | 3 3/8" | 1/4" | Hex | 1/4" | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 0000000 | 00000 |
| 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" | 0.1875", 0.25", 0.3125", 0.375", 0.4375", 0.5", 0.5625", 0.625", 0.6875", 0.75", 0.8125", 0.875" | 12 | 3" | 1/8" | Hex | 3/8" | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 0000000 | 00000 |
| 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" | 0.25", 0.3125", 0.375", 0.4375", 0.5", 0.5625", 0.625", 0.6875", 0.75" | 9 | 2 5/8" | 1/8" | Hex | 3/8" | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 0000000 | 00000 |
| 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1 1/8", 1 1/4", 1 3/8" | 0.25", 0.375", 0.5", 0.625", 0.75", 0.875", 1", 1.125", 1.25", 1.375" | 10 | 3 1/8" | 1/8" | Hex | 7/16" | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 0000000 | 00000 |
| 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" | 0.5625", 0.625", 0.6875", 0.75", 0.8125", 0.875", 0.9375", 1" | 8 | 2 1/2" | 1/8" | Hex | 7/16" | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 0000000 | 00000 |
| 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8" | 0.8125", 0.875", 0.9375", 1", 1.0625", 1.125", 1.1875", 1.25", 1.3125", 1.375" | 10 | 2 1/8" | 1/8" | Hex | 7/16" | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 0000000 | 00000 |
| 7/8", 1 1/8" | 0.875", 1.125" | 2 | 3" | 1/8" | Hex | 7/16" | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 0000000 | 00000 |
Metric | ||||||||||
Titanium-Nitride (TiN) Coated High-Speed Steel | ||||||||||
| 4.0 mm, 5.0 mm, 6.0 mm, 7.0 mm, 8.0 mm, 9.0 mm, 10.0 mm, 11.0 mm, 12.0 mm | 0.1575", 0.1968", 0.2362", 0.2756", 0.315", 0.3543", 0.3937", 0.4331", 0.4724" | 9 | 83mm | 5mm | Hex | 6.5mm | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 4.0 mm, 6.0 mm, 8.0 mm, 10.0 mm, 12.0 mm, 14.0 mm, 16.0 mm, 18.0 mm, 20.0 mm, 22.0 mm | 0.1575", 0.2362", 0.315", 0.3937", 0.4724", 0.5512", 0.6299", 0.7087", 0.7874", 0.8661" | 10 | 76mm | 5mm | Hex | 10mm | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 5.0 mm, 7.5 mm, 10.0 mm, 13.0 mm, 16.0 mm, 19.0 mm, 21.0 mm, 23.0 mm, 26.0 mm, 29.0 mm, 31.0 mm, 33.0 mm, 35.0 mm | 0.1968", 0.2953", 0.3937", 0.5118", 0.6299", 0.748", 0.8268", 0.9055", 1.0236", 1.1417", 1.2205", 1.2992", 1.378" | 13 | 79mm | 4mm | Hex | 11.1mm | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 000000 |
| 6.0 mm, 8.0 mm, 10.0 mm, 12.0 mm, 14.0 mm, 16.0 mm, 18.0 mm | 0.2362", 0.315", 0.3937", 0.4724", 0.5512", 0.6299", 0.7087" | 7 | 64mm | 5mm | Hex | 10mm | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
Uncoated High-Speed Steel | ||||||||||
| 4.0 mm, 5.0 mm, 6.0 mm, 7.0 mm, 8.0 mm, 9.0 mm, 10.0 mm, 11.0 mm, 12.0 mm | 0.1575", 0.1968", 0.2362", 0.2756", 0.315", 0.3543", 0.3937", 0.4331", 0.4724" | 9 | 83mm | 5mm | Hex | 6.5mm | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 4.0 mm, 6.0 mm, 8.0 mm, 10.0 mm, 12.0 mm | 0.1575", 0.2362", 0.315", 0.3937", 0.4724" | 5 | 86mm | 11mm | Hex | 6.5mm | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 4.0 mm, 6.0 mm, 8.0 mm, 10.0 mm, 12.0 mm, 14.0 mm, 16.0 mm, 18.0 mm, 20.0 mm, 22.0 mm | 0.1575", 0.2362", 0.315", 0.3937", 0.4724", 0.5512", 0.6299", 0.7087", 0.7874", 0.8661" | 10 | 76mm | 5mm | Hex | 10mm | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 5.0 mm, 7.5 mm, 10.0 mm, 13.0 mm, 16.0 mm, 19.0 mm, 21.0 mm, 23.0 mm, 26.0 mm, 29.0 mm, 31.0 mm, 33.0 mm, 35.0 mm | 0.1968", 0.2953", 0.3937", 0.5118", 0.6299", 0.748", 0.8268", 0.9055", 1.0236", 1.1417", 1.2205", 1.2992", 1.378" | 13 | 79mm | 4mm | Hex | 11.1mm | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 6.0 mm, 8.0 mm, 10.0 mm, 12.0 mm, 14.0 mm, 16.0 mm, 18.0 mm | 0.2362", 0.315", 0.3937", 0.4724", 0.5512", 0.6299", 0.7087" | 7 | 64mm | 5mm | Hex | 10mm | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 14.0 mm, 16.0 mm, 18.0 mm, 20.0 mm, 22.0 mm, 24.0 mm | 0.5512", 0.6299", 0.7087", 0.7874", 0.8661", 0.9449" | 6 | 64mm | 5mm | Hex | 11.1mm | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
| 20.0 mm, 22.0 mm, 24.0 mm, 26.0 mm, 28.0 mm, 30.0 mm, 32.0 mm, 34.0 mm | 0.7874", 0.8661", 0.9449", 1.0236", 1.1024", 1.1811", 1.2598", 1.3386" | 8 | 54mm | 5mm | Hex | 11.1mm | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
Cobalt Steel Multidiameter Drill Bits
With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life. Steps with progressively larger diameters let you drill a range of sizes with one bit. Also known as step drills.
Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Decimal Size Equivalent | No. of Sizes | Overall Lg. | For Max. Material Thick. | Type | Size | Point Style | For Use On | Each | |
Inch | ||||||||||
Uncoated Cobalt Steel | ||||||||||
| 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2" | 0.125", 0.1563", 0.1875", 0.2188", 0.25", 0.2813", 0.3125", 0.3438", 0.375", 0.4063", 0.4375", 0.4688", 0.5" | 13 | 3 1/4" | 1/2" | Hex | 1/4" | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel | 0000000 | 000000 |
| 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" | 0.1875", 0.25", 0.3125", 0.375", 0.4375", 0.5" | 6 | 3 3/8" | 1/2" | Hex | 1/4" | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel | 0000000 | 00000 |
| 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" | 0.1875", 0.25", 0.3125", 0.375", 0.4375", 0.5", 0.5625", 0.625", 0.6875", 0.75", 0.8125", 0.875" | 12 | 3" | 7/8" | Hex | 3/8" | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel | 0000000 | 00000 |
| 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" | 0.25", 0.3125", 0.375", 0.4375", 0.5", 0.5625", 0.625", 0.6875", 0.75" | 9 | 2 5/8" | 3/4" | Hex | 3/8" | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel | 0000000 | 00000 |
| 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" | 0.5625", 0.625", 0.6875", 0.75", 0.8125", 0.875", 0.9375", 1" | 8 | 2 1/2" | 1" | Hex | 7/16" | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel | 0000000 | 00000 |
| 7/8", 1 1/8" | 0.875", 1.125" | 2 | 3" | 1 1/8" | Hex | 7/16" | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel | 0000000 | 000000 |
Any-Diameter Drill Bits
A
B
Place a washer (not included) with an ID of the desired hole size over the bit and it acts as a stop to prevent the bit from drilling a larger hole.
Style A do not require a pilot hole.
Style B require a 1 29/64” pilot hole to start drilling.
Shank | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Size | Size Decimal Equivalent | Overall Lg. | For Max. Material Thick. | Max. Drilling Dp. | Type | Size | Point Style | For Use On | Each | |
Inch | |||||||||||
Black-Oxide High-Speed Steel | |||||||||||
| A | 1/8"-9/16" | 0.125"-0.5625" | 2 1/4" | 1/16" | 0.08" | Round | 1/4" | Standard | Steel, Iron, Stainless Steel | 0000000 | 000000 |
| A | 1/4"-13/16" | 0.25"-0.8125" | 2 3/4" | 1/16" | 0.08" | Round | 3/8" | Standard | Steel, Iron, Stainless Steel | 0000000 | 00000 |
| A | 5/8"-1 3/16" | 0.625"-1.1875" | 3" | 1/16" | 0.08" | Round | 3/8" | Standard | Steel, Iron, Stainless Steel | 0000000 | 00000 |
| A | 1"-1 5/8" | 1"-1.625" | 3 1/4" | 1/16" | 0.08" | Round | 3/8" | Standard | Steel, Iron, Stainless Steel | 0000000 | 00000 |
| B | 1 1/2"-2 1/16" | 1.5"-2.0625" | 2 3/4" | 1/16" | 0.08" | Round | 1/2" | __ | Steel, Iron, Stainless Steel | 0000000 | 000000 |
Multidiameter Drill Bit Sets
Steps with progressively larger diameters let you drill a range of sizes with one bit. Also known as step drills.
Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated drill bits.
| Number of Pieces | Drill Bit Sizes Included | Shank Type | Point Style | For Use On | Each | |
Inch | ||||||
|---|---|---|---|---|---|---|
Uncoated High-Speed Steel | ||||||
| 3 | 1 each in sizes 1/8"-1/2", 3/16"-1/2", 1/4"-3/4" | Hex | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 0000000 | 000000 |
| 4 | 1 each in sizes 1/8"-1/2", 3/16"-1/2", 3/16"-7/8", 13/16"-1 3/8" | Hex | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 0000000 | 000000 |
Titanium-Nitride (TiN) Coated High-Speed Steel | ||||||
| 3 | 1 each in sizes 1/8"-1/2", 3/16"-1/2", 1/4"-3/4" | Hex | Standard | Steel, Hardened Steel, Tool Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Plastic | 00000000 | 00000 |
Oversized Long-Life Counterboring Drill Bits
These counterbores are often used when screw holes in sheets or layers are misaligned. Also known as subland drill bits, they last longer than standard counterboring drill bits because the diameter stays the same after sharpening. They drill and counterbore at the same time. After drilling and counterboring, tap the hole and install your fastener. The diameters account for the 1/32” or 1/64” oversized diameter rating.
Dia. | Lg. | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Screw Size | Body | Step | Step | Overall | Number of Flutes | Point Angle | For Use On | Each | |
Uncoated High-Speed Steel | |||||||||
1/64" Oversized | |||||||||
| No. 6 | 0.234" | 0.146" | 5/16" | 2 7/16" | 2 | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 000000 |
| No. 8 | 0.281" | 0.175" | 3/8" | 4 1/4" | 2 | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
| No. 10 | 0.328" | 0.206" | 5/8" | 4 5/8" | 2 | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
| No. 10 | 0.344" | 0.206" | 1/2" | 4 3/4" | 2 | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
| 1/4" | 0.391" | 0.266" | 1/2" | 5 1/8" | 2 | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
| 1/4" | 0.406" | 0.266" | 1/2" | 5 1/4" | 2 | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
| 3/8" | 0.578" | 0.391" | 3/4" | 4 1/8" | 2 | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
1/32" Oversized | |||||||||
| 1/4" | 0.406" | 0.281" | 1/2" | 5 1/4" | 2 | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
| 5/16" | 0.500" | 0.344" | 5/8" | 6" | 2 | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
| 3/8" | 0.594" | 0.406" | 3/4" | 4 1/8" | 2 | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
Long-Life Counterboring Drill Bits
Also known as subland drill bits, these last longer than standard counterboring drill bits because the diameter stays the same after sharpening. They drill and counterbore at the same time. After drilling and counterboring, tap the hole and install your fastener.
Dia. | Lg. | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Screw Size | Body | Step | Step | Overall | Number of Flutes | Point Angle | For Use On | Each | |
Uncoated High-Speed Steel | |||||||||
| No. 6 | 0.228" | 0.141" | 5/16" | 3 7/8" | 2 | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 000000 |
| No. 8 | 0.272" | 0.164" | 3/8" | 2 11/16" | 2 | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
| No. 10 | 0.313" | 0.190" | 1/2" | 2 13/16" | 2 | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
| 1/4" | 0.375" | 0.250" | 1/2" | 5" | 2 | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
| 5/16" | 0.469" | 0.313" | 5/8" | 3 5/8" | 2 | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
Counterboring Drill Bits
Often called step drill bits, these drill and counterbore holes at the same time. After drilling and counterboring, tap the hole and install your fastener. The body diameter may decrease after multiple sharpenings.
Dia. | Lg. | |||||||
|---|---|---|---|---|---|---|---|---|
| For Screw Size | Body | Step | Step | Overall | Point Angle | For Use On | Each | |
Uncoated High-Speed Steel | ||||||||
| No. 6 | 0.250" | 0.15" | 1/2" | 4" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 |
| No. 8 | 0.290" | 0.178" | 1/2" | 4 1/4" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| No. 10 | 0.332" | 0.204" | 5/8" | 4 3/4" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 1/4" | 0.406" | 0.281" | 11/16" | 5 1/4" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 5/16" | 0.500" | 0.344" | 3/4" | 6" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 3/8" | 0.594" | 0.406" | 7/8" | 7 1/8" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 7/16" | 0.688" | 0.469" | 1" | 7 5/8" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 1/2" | 0.781" | 0.531" | 1" | 9 7/8" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
Countersinking Drill Bits for Taps
Also called subland drill bits, these bits countersink as they drill to prepare holes for tapping. The 90° countersink angle guides the tap into the hole. The drill bit diameter will not change after sharpening.
Dia. | Lg. | 90° Countersink Angle | |||||||
|---|---|---|---|---|---|---|---|---|---|
| For Tap Size | Body | Step | Step | Overall | Shank Dia. | Point Angle | For Use On | Each | |
Uncoated High-Speed Steel | |||||||||
2 Flute | |||||||||
| 6-32 | 0.156" | 0.107" | 5/16" | 3 1/8" | 0.156" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 000000 |
| 8-32 | 0.188" | 0.136" | 3/8" | 3 1/2" | 0.188" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
| 10-32 | 0.219" | 0.159" | 1/2" | 3 3/4" | 0.219" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
| 1/4"-20 | 0.281" | 0.201" | 1/2" | 4 1/4" | 0.281" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
| 1/4"-28 | 0.313" | 0.213" | 5/8" | 4 1/2" | 0.313" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
| 5/16"-18 | 0.438" | 0.257" | 11/16" | 5 1/2" | 0.438" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
| 5/16"-24 | 0.375" | 0.272" | 11/16" | 5" | 0.375" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
| 3/8"-16 | 0.438" | 0.313" | 3/4" | 5 1/2" | 0.438" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
| 7/16"-14 | 0.500" | 0.368" | 3/4" | 6" | 0.5" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 00000000 | 00000 |
Countersinking Drill Bits for Screws
Also known as step drill bits, these bits countersink as they drill. The 82° countersink angle is compatible with the profile of flat- and oval-head inch screws. After multiple sharpenings, the drill bit diameter may become smaller.
Dia. | Lg. | 82° Countersink Angle | |||||||
|---|---|---|---|---|---|---|---|---|---|
| For Screw Size | Body | Step | Step | Overall | Shank Dia. | Point Angle | For Use On | Each | |
Uncoated High-Speed Steel | |||||||||
2 Flute | |||||||||
| No. 6 | 0.281" | 0.142" | 1/2" | 4 1/4" | 0.2813" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 |
| No. 8 | 0.332" | 0.169" | 1/2" | 4 3/4" | 0.3320" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| No. 10 | 0.386" | 0.196" | 5/8" | 5 1/8" | 0.3860" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 1/4" | 0.500" | 0.257" | 11/16" | 6" | 0.5000" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 5/16" | 0.625" | 0.320" | 3/4" | 7 1/8" | 0.6250" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 3/8" | 0.750" | 0.383" | 7/8" | 5" | 0.7500" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 7/16" | 0.813" | 0.446" | 1" | 5 1/4" | 0.8125" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 1/2" | 0.875" | 0.510" | 1" | 5 1/2" | 0.8750" | 118° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |