Sets include various sizes of quick-hold external grip pullers. Each puller has a cage around the jaws that keeps them in place for a quick job of gripping bearings and pulleys.

Move the immovable—this puller set includes a hydraulic hand pump so you can create up to 17 1/2 tons of pulling force.

Remove press-fit hubs and fan blades in a variety of sizes. Sets include a hub adapter and long jaws so you can grip large components.

Use the separators in these sets to separate bearings, collars, hubs, and other shaft-mounted items so you can remove them.

Clamp these separators into the V-groove of a pulley for a secure grip.

Also known as steering wheel and flywheel pullers, you can change the bolt configuration on these pullers to fit a variety of tapered hole patterns.

Tackle a wide variety of pulling jobs—use pullers in these sets to grip objects from the outside or the inside.

Self-locking jaws hold these pullers in place for quick one-hand operation. Spring tension holds the jaws against the object being pulled, so you can tighten the locking nut.

With a variety of expanding collets that secure bearings and bushings from inside, these puller sets let you get a grip on objects with blind holes.

Also known as pilot bearing pullers, use these pullers to grip the interior edge of press-fit bearings, oil seals, and bushings.

Use a shaft protector on the tip of your forcing screw to prevent damage from pressure applied by the puller and forcing screw.

Remove stuck or corroded Moen faucet cartridges.

Designed to meet DIN EN 61340-5-1, these handles reduce static electricity that can damage electronic equipment. Fasten them directly to the front of your surface to open and close a variety of doors and drawers.

Identify equipment controls and components at a glance by their color. Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

For applications that require a large gripping area, these handles have a center-to-center distance of 12" or more. Fasten them directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Open and close a variety of doors and drawers on machines and equipment next to food processing lines while reducing the risk of contaminating the food. Thread screws through holes from the back of your surface into the handles to install them.

These handles provide a stronger connection than those attached with screws or nuts. Use them to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. The grip is offset from the mounting surface so there's room to fully grasp the handle.

Mount these pulls to the edge of drawers, panels, and doors. When closed, only the fingertip grip is visible.

Designed to snap into a cutout, these handles are flush with the mounting surface. Use them to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

With a sanitary design, these threaded-hole knobs are often used to open and close doors and drawers on furniture, machines, and other equipment in pharmaceutical and food-processing facilities.

These handles provide a stronger connection than those attached with screws or nuts. They fit into a cutout, so they are flush with the mounting surface. Use them to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. They fit into a cutout, so they are flush with the mounting surface.

Mount these knobs in a cutout to keep them out of the way when not in use. Push the grip to extend, and push it again to recess. Use these knobs to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Thread screws through holes from the back of your surface into the handle to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. These handles fit into a cutout, so they’re flush with the mounting surface.

When not in use, the spring in these handles keeps the folding grip flush with the mounting plate and prevents rattling. Fasten the handles directly to the front of your surface to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.

Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. Their grip folds out of the way when it's not in use.

Add or replace handles on drums and barrels. All of these handles have a curved mounting plate that sits flush against the surface and a folding grip that drops out of the way when you let go. Fasten them directly to the front of the surface.

Thread screws through holes from the back of your surface into the handles to install. These handles fit into a cutout, so they are flush with the mounting surface. Their grip drops out of the way when you let go. Use them to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.

Detents keep these handles in the extended or folded position—they won't move until you reposition them. Insert studs into holes in your surface and secure from the backside to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.

Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. When not in use, the grip folds out of the way.

Operate doors, vents, skylights, and overhead equipment.

Hook into your roller chain and use the handle to tighten the jaw until the chain ends are close enough to add or remove a link. Choose from holders with maximum jaw capacity from 1 3/4” to 5”.

Use the assorted tools in these sets to pull material out of tight spots. The corkscrew tips twist into material for a firm hold while the handle provides the necessary leverage for pulling.

Sets include an assortment of handles and tips for pulling material out of tight spots. Replace tips when they become worn or to use a different style.

Made of beryllium copper with an aluminum-bronze handle, these pullers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use to extract material from tight spots.

Install and position tiny springs and wires. Unlike conventional picks that have pointed tips, these are rounded to prevent damage to sensitive components.

The angled tip and large handle make it easy to pry out cotter pins.

Pull one or more cables through conduit.

Pull wire and cable while maintaining tension until the line can be permanently anchored. Use these clamps with stranded bare steel wire and cable.

These versatile pullers give you the capacity of a winch, and have a thick, rugged frame for long life. The wire rope on the pullers is stronger than rope and webbing but not as bulky as chain.

These versatile pullers are made of aluminum with stainless steel rope for corrosive environments. They give you the capacity of a winch in a portable tool. Wire rope is stronger than rope and webbing but not as bulky as chain.

These pullers have a thick, rugged frame for long life. They have a soft, wide strap so they won't damage surfaces.

A thick, rugged frame gives these pullers long life, while a hardened steel chain makes them the strongest, most durable pullers we offer.

Also known as skidding tongs, these tongs have fine points that grab and hold even the hardest wood.

Attach these clamps by running a wire rope through the jaws to create an attachment point anywhere along the wire rope.

Install these stations throughout your facility for quick access in case of a fire.