Reduce movement of items during transit—nonslip surfaces keep equipment from sliding around.

With shelves on one side and a pegboard on the other, these carts keep tools easily accessible.

Keep multimeters, oscilloscopes, and other instruments at a convenient viewing angle and height.

Store, organize, and transport spools of wire and small tools around your jobsite.

These carts have easy-to-clean surfaces, lipped shelves to contain spills, and meet NSF/ANSI 2 sanitary standards for food-service applications.

Made of welded stainless steel, these carts combine corrosion resistance with the strength and durability of steel carts.

Not only are these carts corrosion resistant, they also meet NSF/ANSI standards so they're suitable for food processing applications.

The shelves on these carts have high sides to prevent items from sliding off.

Keep paperwork organized while in transit. These carts hold letter- and legal-size hanging folders.

The shelves are split into identical sides so you can efficiently organize two operations on one cart.

Organize all your 3D printing tools and supplies in one mobile workstation.

A place for everything—these carts hold mops, buckets, cleaning supplies, floor signs, and more.

No need to lug around a ladder and a cart—these carts do the job of both.

These economical trucks carry loads up to 600 lbs.

Wood platforms are quieter, and grip loads and absorb impact better than trucks with a metal platform.

These economical trucks carry loads up to 400 lbs.

Reduce bending while loading and unloading—raised platforms keep material at a comfortable working height.

Tall handles let you stack higher than other trucks, and a narrow platform with rigid casters in the center and swivel casters at each end let you maneuver in tight spaces. Remove the handles for easy unloading.

These seamless trucks have a capped drain for easy cleaning and sanitizing, and are made of FDA listed materials for use with food. They resist dents, corrosion, and many chemicals and have ribbed sidewalls for added strength.

Tow up to three of these trucks at a time. The steel reinforcement prevents bulging on these lightweight, dent-resistant plastic trucks.

The top rim on these trucks is double-walled to handle the hardest knocks. They are made of lightweight plastic that resists dents, corrosion, and many chemicals.

Mesh side panels maximize air circulation and visibility of contents. The all-welded steel construction delivers strength and durability.

These versatile hampers have flexible fabric sides that handle wet and dry loads.

Wheel these hoppers around or transport with a forklift. Release the locking latch to dump the load.

Built to withstand the heaviest use, these hoppers have thick walls and a 40% thicker frame than other hoppers. Use a forklift to move these perfectly balanced hoppers, then release the locking latch to dump the load. They automatically return to an upright, locked position.

These hoppers have thicker walls than standard hoppers for more strength. Use a forklift to move these perfectly balanced hoppers, then release the locking latch to dump the load. They automatically return to an upright, locked position.

Hoist these hoppers to move, then open the trapdoor on the bottom to empty.

Wheel these dump trucks around or move them with a forklift. Tilt to empty.

These easy-to-clean, corrosion-resistant plastic trucks are reinforced with steel for strength. Removable rails allow you to configure them to accommodate a variety of long, flat loads.

Add wheels to a door, partition, or piece of sheet stock to make moving a one-person job.

These wagons provide a smooth and gentle ride for transporting fragile loads. They are quieter and absorb impact better than steel wagons.

Tow large quantities of loose material around a facility, then flip the rear panel up for easy dumping.

A T-style handle and four swivel casters make these dollies easy to push, pull, and maneuver along walls and aisles.

A ring around the outside of these dollies supports loads and prevents them from slipping off.

The casters on these dollies are mounted outside the platform for increased stability.

Maximize stability and minimize spills. These dollies have a large, open platform that sits low to the ground to slide under drums for better support and minimal tipping.

These corrosion-resistant stainless steel trucks withstand harsh environments and frequent washdowns.

Instead of tilting these trucks during transport, push on the handle to lift a drum straight off the ground and move it easily over obstacles. Push the handle down to tilt the drum to dispense.

Store, mix, and drain drums in a single location.

With the push of a button the hydraulic lift raises the drum, while the chute controls the flow of the material being dispensed to prevent splashes and spills.

These trucks let you lift, transport, and place drums without a forklift.

These two-wheeled trucks are good for moving drums short distances.

These aluminum trucks are strong, spark resistant, and lighter in weight than steel trucks.

Crank the handle on the built-in hand jack to position cylinders up to 11" off the ground for easier loading.

These trucks have rear legs with swivel casters for additional stability and better mobility.

Steel trucks are stronger and more durable than plastic trucks.

Trucks carry one cylinder behind the other so it's easy to navigate narrow aisles and confined spaces. Rear wheels provide better stability and mobility.

With one cylinder secured behind the other it's easy to navigate narrow aisles and confined spaces.

Aluminum trucks are lighter than steel and stainless steel trucks and are more durable than fiberglass trucks.

For washdown and harsh environments, these trucks are as strong as steel trucks but more corrosion resistant.

These trucks have an extra set of rear wheels for increased stability and better mobility.

Quickly convert these trucks from hand truck to platform truck to carry a variety of loads in either a horizontal or vertical position.

Tilt these trucks back to move loads, then fold them for easy transport and storage.

In addition to rotating rubber stair climbers, these trucks have fold-down rear legs for increased stability when moving loads up and down stairs and over curbs.

Use these trucks in pairs to lift large, bulky, and long loads. A hand-operated hydraulic lift raises and lowers the load.

Sized to move pallets, set these dollies to a comfortable working height while loading and unloading.

A rustproof aluminum platform and open corners for easy drainage make these dollies a good fit for food-service applications, plus they meet NSF/ANSI standards for food equipment.

Adjust the width of the forks to fit most pallets. A hydraulic pump powered by a rechargeable battery raises and lowers the load with the push of a button.

Crank a handle or pump a foot pedal to raise and lower loads.

A lower fork height allows these trucks to work with low-clearance pallets. Hydraulic pumps let you easily raise and move pallets.

Let these trucks do the lifting for you. A hydraulic pump raises and lowers loads at the touch of a button while a throttle controls forward and reverse speed.

Move loads around your facility, then use the hydraulic pump to lift them to a comfortable working height.

No need for separate platform and counting scales, these trucks weigh and count the contents of pallets before you move them around your facility.

The combination of an offset handle and V-shaped cradle lets one person balance and move large, long loads.

These workbenches are dent and rust resistant.

Tilt back these workbenches to roll them anywhere. Open the lid to use it as a work surface.

These workbenches range in size from 25"-42" wide.

Reinforced for strength and durability, these workbenches can hold twice the weight of our standard large-capacity cabinet workbenches.

These workbenches have plastic frames that won't rust or dent.

Without a shelf, these tables provide room to pull up a stool or chair. The durable steel top won't warp or splinter.

A lower shelf provides additional storage space. Often used in laboratories, these tables stand up to repeated washdowns and resist damage from grease and chemicals.

The wood top on these tables is nonconductive, resists impact, and can be sanded and refinished.

With an extra-smooth nonconductive surface, these tables won't trap dirt and oil, making them easy to clean. They are often used as printer stands.

These durable tables won't warp or splinter. Use them to elevate machinery and equipment up to 24" from the floor.

These durable tables won't warp or splinter. They can be configured at a custom height.

Support 3,000 to 5,000 lbs. with these welded tables. They can be configured for either seated or standing tasks.

Raise or lower these tables to a comfortable working height.

With thicker steel and a thicker window than other stand-up-height computer workstations, these workstations protect a computer from tough plant environments.

The top compartment has a window that shields the monitor while providing a clear view of the screen.

Wheel your tablet with you around your facility while keeping it at a comfortable standing height.

The sloped shelves on these shelving units allow parts to flow forward, providing access and visibility.

This shelving won't rust, dent, peel, or chip.

These steel shelves are epoxy-coated, making them chemical and corrosion resistant.

Also known as cantilever racks.

Roll these bins near benches or other work areas, and turn each storage level to access the items you need.

Transport all your spools at the same time or use as a hand truck when spools are removed.

Connect T‐slotted rails and reinforce joints for structural stability.

Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.

Pivots provide smooth motion at the junction between two T-slotted rails.

Add panels to T-slotted framing to create machine guards, strip doors, and welding curtains.

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

Attach and position phones, tablets, monitors, and other displays on T-slotted rails.

Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.

Use hinges to add doors, lids, and machine guards to T-slotted framing.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Illuminate workstations, enclosures, and machines.

Add electrical outlets to workstations with these outlet strips that mount on T-slotted rails.

Control static and ground T-slotted framing structures with these bonding and grounding components.

Distribute compressed air, hydraulic fluid, or water from a single supply to multiple locations.