For added security, drawers are concealed behind padlockable doors.

Tilt back these workbenches to roll them anywhere. Open the lid to use it as a work surface.

These workbenches have bases with a combination of drawers and doors that offer plenty of storage options for tools and parts.

At 48" wide and greater, these workbenches have a larger work surface and more storage than our standard cabinet workbenches.

Reinforced for strength and durability, these workbenches can hold twice the weight of our standard large-capacity cabinet workbenches.

Solid pieces of wood are glued together to ensure durability.

Often used in laboratories, these tops resist chemicals, stains, scratching, and humidity.

A corrosion-resistant, stainless steel surface and sealed, plastic laminate bottom make these tops suitable for food service.

Use two legs to hold up to 4,000 lbs. Adjust height in 1 1/2" increments with rivets that slide into keyhole slots.

Use two legs for a capacity of 6,000 lbs. Remove and reposition the bolts to adjust height in 1" increments.

All legs have knockouts in the front and back to accept duplex electrical outlets.

These corrosion-resistant legs are often used in food-processing plants and laboratories.

Adjust the height of a workbench without clearing off the top or loosening leg bolts.

The sloped top, drainage hole and plug, and drain pan contain spills when working with fluids.

Fold the legs and use the handle to carry these workbenches with one hand.

To keep work from falling off the top, these workbenches have a backstop and side stops.

Stack these drawers under a workbench.

Position these shelves at any angle.

Keep tools visible and organized above a workbench.

Prevent tools and parts from rolling off a workbench.

Not only do these mats prolong the life of a workbench top, they also protect tools and parts by cushioning them when they fall.

The work surface is positioned at a comfortable height for writing and working while standing.

The top compartment has a window that shields the monitor while providing a clear view of the screen.

Mix and match components to design an office work area that can be reconfigured as needed.

Adjust the shelves to accommodate a computer and other electronic equipment.

Change any desk or table into a stand-up-height work surface.

Mount these workstations on a flat vertical surface to create a steady horizontal surface for writing, typing, or tinkering.

Without a shelf, these tables provide room to pull up a stool or chair. The durable steel top won't warp or splinter.

A lower shelf provides additional storage space. Often used in laboratories, these tables stand up to repeated washdowns and resist damage from grease and chemicals.

The wood top on these tables is nonconductive, resists impact, and can be sanded and refinished.

Also known as balance tables, these marble tables provide superior vibration control for sensitive measuring equipment.

With a thick steel frame and welded construction, these tables have a capacity of at least 10,000 lbs.

With an extra-smooth nonconductive surface, these tables won't trap dirt and oil, making them easy to clean. They can be configured at a custom height.

Often used in laboratories and food-processing areas, these tables withstand repeated washdowns and resist damage from grease and chemicals. They can be configured for either seated or standing tasks.

With an extra-smooth nonconductive surface, these tables won't trap dirt and oil, making them easy to clean. They are often used as printer stands.

The wood top is nonconductive as well as impact and chemical resistant. It can be sanded and refinished. Use these tables to elevate machinery and equipment 24" from the floor.

With a flatness tolerance of 0.002" per foot, these 24" high tables provide an accurate reference surface for layout and inspection work. They have a thick steel frame and welded construction to support 35,000 lbs.

Fold these lightweight tables in half and use the handle to carry them with one hand.

Raise or lower these tables to a comfortable working height.

Replace a table leg or make a table with your own tabletop.

Keep sawdust and other particles out of the air while drilling, sanding, and finishing wood products. Air blowers pull particles into the table through holes in the surface, making sure you don't breathe them.

With their compact size, these sawhorses are easy to store and transport.

Remove the stackable cabinet and carry only the tools you need.

Protect against corrosion with these stainless steel cabinets.

Store your heaviest tools and parts. Use cabinets individually, stacked, or connect side-by-side.

Use cabinets individually or stacked.

Keep tools and small parts in place and protected from damage.

These cabinets won't dent, chip, or rust.

Cabinets are stackable with others of the same width and depth.

Remove individual boxes to take the parts you need without moving the entire storage unit.

Carry multiple compartmented boxes at once using the built-in handle.

This cabinet is built to store your heaviest supplies, parts, and equipment.

These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.

Connect T‐slotted rails and reinforce joints for structural stability.

Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.

Mount these bull's eye levels to workstation and table frames made of T-slotted framing for easy leveling in all directions on the horizontal plane.

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.

Illuminate workstations, enclosures, and machines.

Pivots provide smooth motion at the junction between two T-slotted rails.

For repetitive workholding, mount these clamps to T-slotted framing to hold and release parts.

Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.

Distribute compressed air, hydraulic fluid, or water from a single supply to multiple locations.

Align and drill accurate holes in T-slotted rails with these reusable templates.

Route wires, cables, and tubing along T‐slotted rails.

Organize all your 3D printing tools and supplies in one mobile workstation.

Reduce movement of items during transit—nonslip surfaces keep equipment from sliding around.

Turn the hand wheels to raise the load and tilt it up to 30° for a more ergonomic angle.

These tables have a foot lever and hydraulic pump to raise loads and either a hand valve or hand lever for controlled lowering.

An extra-long, reinforced tabletop gives you plenty of room for oversized loads.

An electric motor and a hydraulic pump lift loads with the push of a button.

An extra-large tabletop provides plenty of room for oversized loads.

These tables are compact, yet provide the lifting capacity of standard lift tables.

Choose your table based on capacity, then choose the type of control that best suit your application.