Container Type Container Type |
---|
![]() | ![]() |
Tube | Grease Gun Cartridge |
![]() | ![]() |
Pail | Jar |
![]() | ![]() |
Bottle | Spray Bottle |
![]() | ![]() |
Aerosol Can | Can |
For Use On For Use On |
---|
|
Synthetic Oil Composition Synthetic Oil Composition |
---|
|
Lubricant Type Lubricant Type |
---|
|
Trade Name Trade Name |
---|
Container Size Container Size |
---|
Base Oil Base Oil |
---|
|
|
Thickener Thickener |
---|
|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Manufacturer Manufacturer |
---|
|
|
Specifications Met Specifications Met |
---|
Environment Environment |
---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Compatible With Compatible With |
---|
|
|
Maximum Vacuum @ Temperature Maximum Vacuum@ Temperature |
---|
|
More
More
More
Apply directly to seals and O-rings to extend service life by preventing drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter. NLGI 3 is about the consistency of vegetable shortening. It is good for tight-tolerance plug valves and high-pressure seals.
Mineral-oil-based grease, derived from petroleum, is more economical than synthetic-oil-based grease. Synthetic-oil-based grease lasts longer than mineral-oil-based grease and withstands a wider range of temperatures.
Grease with lithium thickener offers good heat and moisture resistance. Grease with PTFE thickener has good heat, moisture, and oxidation resistance. Grease with silica thickener resists washing off and reduces corrosion in wet environments. Grease with barium thickener is for use with silicone rubber O-rings and seals in open systems.
Grease with moly (molybdenum disulfide) has excellent resistance to wear and can withstand high-load and high-pressure applications. Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity. Grease with zinc neutralizes acid and is a good replacement for leaded grease.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
DuPont Molykote 55 O-Ring Grease is silicone-based, so it can be used with most rubbers and plastics. Not recommended for use with silicone rubber, polycarbonate plastic, or ABS plastic. Chemours Krytox™ 240AC Type III resists most acids, bases, solvents, and fuels, and is long lasting with an indefinite shelf life. Loctite® Krytox™ RFE PFPE LB 8209 handles extreme temperature swings, resists acids, bases, and fuels, and is long lasting. It can be used under high loads.
Jet-Lube Ezy-Open is a grease-like liquid that contains detergent and PTFE additives to clean more effectively than grease while it lubricates. Since it is a liquid, it does not have a NLGI viscosity grade, but is less viscous than anything else in our offering.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Each | |
DuPont Molykote 55 O-Ring Grease—Lithium Thickener | ||||||||||
2 | Synthetic | Moly | 5.3 oz. | Tube | -85° to 350° | 425° | White | __ | 0000000 | 000000 |
2 | Synthetic | Moly | 8 lbs. | Pail | -85° to 350° | 425° | White | __ | 0000000 | 000000 |
Chemours Krytox™ 240AC Type III—PTFE Thickener | ||||||||||
2 | Synthetic | __ | 2 oz. | Tube | -30° to 550° | Not Rated | White | MIL-PRF-27617 | 00000000 | 000000 |
2 | Synthetic | __ | 8 oz. | Tube | -30° to 550° | Not Rated | White | MIL-PRF-27617 | 00000000 | 000000 |
Loctite® Krytox™ RFE PFPE LB 8209—PTFE Thickener | ||||||||||
2 | Synthetic | __ | 2 oz. | Tube | -15° to 500° | Not Rated | White | __ | 0000000 | 00000 |
Jet-Lube Ezy-Open Liquid—Silica Thickener | ||||||||||
__ | Synthetic | PTFE | 35 lbs. | Pail | -10° to 400° | Not Rated | Amber | __ | 0000000 | 000000 |
Lubriplate Aero—Lithium Thickener | ||||||||||
1 | Mineral | Zinc | 1.8 oz. | Tube | -70° to 250° | 380° | Off-White | __ | 0000000 | 0000 |
Barium Thickener | ||||||||||
2 | Mineral | __ | 4 oz. | Tube | 0° to 300° | 410° | Amber | __ | 0000000 | 00000 |
Silica Thickener | ||||||||||
3 | Vegetable | __ | 14 oz. | Grease Gun Cartridge | 0° to 400° | Not Rated | Amber | __ | 0000000 | 00000 |
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Pkg. Qty. | Pkg. | |
DuPont Molykote 55 O-Ring Grease—Lithium Thickener | ||||||||||
2 | Synthetic | Moly | 5.3 oz. | Tube | -85° to 350° | 425° | White | 12 | 00000000 | 0000000 |
Lubriplate Aero—Lithium Thickener | ||||||||||
1 | Mineral | Zinc | 1.8 oz. | Tube | -70° to 250° | 380° | Off-White | 36 | 00000000 | 000000 |
Barium Thickener | ||||||||||
2 | Mineral | __ | 4 oz. | Tube | 0° to 300° | 410° | Amber | 24 | 00000000 | 000000 |
Silica Thickener | ||||||||||
3 | Vegetable | __ | 14 oz. | Grease Gun Cartridge | 0° to 400° | Not Rated | Amber | 30 | 00000000 | 000000 |
Thickened with silica, this heavy grease clings to parts so it won't wash off in wet environments. Apply directly to plastic and rubber seals and O-rings to prevent drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 3 is about the consistency of vegetable shortening.
Grease lubricates most efficiently within the listed temperature range.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size, oz. | Type | Temp. Range, °F | Melting Temp. | Color | Each | |
DuPont Molykote 112 High Performance—Silica Thickener | ||||||||
3 | Synthetic | 5.3 | Tube | -40° to 450° | Not Rated | White | 0000000 | 000000 |
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size, oz. | Type | Temp. Range, °F | Melting Temp. | Color | Pkg. Qty. | Pkg. | |
DuPont Molykote 112 High Performance—Silica Thickener | |||||||||
3 | Synthetic | 5.3 | Tube | -40° to 450° | Not Rated | White | 12 | 00000000 | 0000000 |
A firm consistency and resistance to evaporation make this grease ideal for vacuum applications, such as flow meters, vacuum and pressure systems, and laboratory equipment. Apply directly to seals and O-rings to prevent drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter. NLGI 3 is about the consistency of vegetable shortening and is comparable to Fomblin grease. NLGI 4 is about the consistency of frozen yogurt.
Grease with PTFE thickener resists aggressive acids, bases, and solvents. Chemours Krytox™ 240 grease is long lasting with an indefinite shelf life.
Grease lubricates most efficiently below the maximum temperature. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp., °F | Maximum Vacuum @ Temperature | Color | Specifications Met | Each | |
DuPont Molykote High Vacuum Grease—Silica Thickener | ||||||||||
3-4 | Synthetic | 5.3 oz. | Tube | -40° to 400° | Nonmelting | 10^-6 torr @ 72° F | White | __ | 0000000 | 000000 |
3-4 | Synthetic | 8 lbs. | Pail | -40° to 400° | Nonmelting | 10^-6 torr @ 72° F | White | __ | 0000000 | 000000 |
Chemours Krytox™ 240AB Type II—PTFE Thickener | ||||||||||
2 | Synthetic | 0.5 oz. | Tube | -40° to 450° | Not Rated | 5×10^-6 torr @ 100° F | White | MIL-PRF-27617 | 00000000 | 00000 |
2 | Synthetic | 2 oz. | Tube | -40° to 450° | Not Rated | 5×10^-6 torr @ 100° F | White | MIL-PRF-27617 | 00000000 | 000000 |
Chemours Krytox™ 240AZ Type I—PTFE Thickener | ||||||||||
1 | Synthetic | 0.5 oz. | Tube | -70° to 300° | Nonmelting | 4×10^-4 torr @ 100° F | White | MIL-PRF-27617 | 00000000 | 00000 |
1 | Synthetic | 2 oz. | Tube | -70° to 300° | Nonmelting | 4×10^-4 torr @ 100° F | White | MIL-PRF-27617 | 00000000 | 000000 |
PTFE Thickener | ||||||||||
3 | Synthetic | 3.5 oz. | Tube | 0° to 480° | 525° | 7.5×10^-4 torr @ 72° F | White | __ | 0000000 | 000000 |
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp., °F | Maximum Vacuum @ Temperature | Color | Pkg. Qty. | Pkg. | |
DuPont Molykote High Vacuum Grease—Silica Thickener | ||||||||||
3-4 | Synthetic | 5.3 oz. | Tube | -40° to 400° | Nonmelting | 10^-6 torr @ 72° F | White | 12 | 00000000 | 0000000 |
Fluorocarbon and fluorinated polymer thickeners add chemical resistance to this grease. It remains intact when exposed to water and most solvents and chemicals. Apply directly to plastic and rubber seals and O-rings to prevent drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter. NLGI 3 is about the consistency of vegetable shortening.
Grease with moly (molybdenum disulfide) has excellent resistance to wear and can withstand high-load and high-pressure applications. Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity. It’s not for use with ketones, such as acetone and MEK.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size, oz. | Type | Temp. Range, °F | Melting Temp., °F | Color | Each | |
DuPont Molykote 3452 Chemical Resistant—Fluorocarbon Thickener | |||||||||
2-3 | Synthetic | Moly | 7.8 | Tube | -20° to 450° | 570° | White | 0000000 | 0000000 |
2-3 | Synthetic | Moly | 19.4 | Grease Gun Cartridge | -20° to 450° | 570° | White | 0000000 | 000000 |
Fluorinated Polymer Thickener | |||||||||
3 | Synthetic | PTFE | 3.5 | Tube | -20° to 450° | 570° | White | 0000000 | 00000 |
3 | Synthetic | PTFE | 19.4 | Grease Gun Cartridge | -20° to 450° | 570° | White | 0000000 | 000000 |
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size, oz. | Type | Temp. Range, °F | Melting Temp., °F | Color | Pkg. Qty. | Pkg. | |
DuPont Molykote 3452 Chemical Resistant—Fluorocarbon Thickener | ||||||||||
2-3 | Synthetic | Moly | 7.8 | Tube | -20° to 450° | 570° | White | 12 | 00000000 | 000000000 |
Fluorinated Polymer Thickener | ||||||||||
3 | Synthetic | PTFE | 3.5 | Tube | -20° to 450° | 570° | White | 12 | 0000000 | 000000 |
This thin grease goes on as a film to form a seal in glass and metal stop cocks. It won't react with laboratory chemicals, such as hydrochloric acid, sulfuric acid, potassium hydroxide, and salt solutions.
Grease lubricates most efficiently below the maximum temperature. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
This grease meets NSF/ANSI Standard 51 and FDA Compliant 21 CFR 175.300 for direct contact with food and NSF/ANSI Standard 61 for use with components that come into contact with drinking water. Formulated with silica thickener and silicone, it resists washing away and has excellent resistance to wear. Apply directly to seals and O-rings to prevent drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 3-4 is between the consistencies of vegetable shortening and frozen yogurt.
Grease lubricates most efficiently within the listed temperature range.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp. | Color | Specifications Met | Each | |
DuPont Molykote 111 Compound—Silica Thickener | ||||||||||
3-4 | Synthetic | Silicone | 5.3 oz. | Tube | -40° to 400° | Not Rated | White | FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61 | 0000000 | 000000 |
3-4 | Synthetic | Silicone | 14 oz. | Grease Gun Cartridge | -40° to 400° | Not Rated | White | FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61 | 0000000 | 00000 |
3-4 | Synthetic | Silicone | 8 lbs. | Pail | -40° to 400° | Not Rated | White | FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61 | 0000000 | 000000 |
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp. | Color | Specifications Met | Pkg. Qty. | Pkg. | |
DuPont Molykote 111 Compound—Silica Thickener | |||||||||||
3-4 | Synthetic | Silicone | 5.3 oz. | Tube | -40° to 400° | Not Rated | White | FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61 | 12 | 00000000 | 0000000 |
3-4 | Synthetic | Silicone | 14 oz. | Grease Gun Cartridge | -40° to 400° | Not Rated | White | FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61 | 10 | 00000000 | 000000 |
Highly pure, this grease is chemically inert, so it won’t contaminate sensitive environments or react with other substances. Due to its low vapor pressure, it resists evaporation, even at high temperatures. Apply directly to seals and O-rings to prevent drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Grease lubricates most efficiently below the maximum temperature. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size, oz. | Type | Temp. Range, °F | Melting Temp. | Color | Each | |
Chemours Krytox™ LVP—PTFE Thickener | ||||||||
2 | Synthetic | 2 | Tube | 5° to 570° | Nonmelting | White | 00000000 | 0000000 |
2 | Synthetic | 8 | Tube | 5° to 570° | Nonmelting | White | 00000000 | 000000 |
2 | Synthetic | 14 | Grease Gun Cartridge | 5° to 570° | Not Rated | White | 00000000 | 00000000 |
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size, oz. | Type | Temp. Range, °F | Melting Temp. | Color | Pkg. Qty. | Pkg. | |
Chemours Krytox™ LVP—PTFE Thickener | |||||||||
2 | Synthetic | 2 | Tube | 5° to 570° | Nonmelting | White | 6 | 000000000 | 0000000 |
Apply directly to seals and O-rings to extend service life by preventing drying and cracking. This oil can be used with virtually any rubber polymer, including Buna-N and neoprene.
Viscosity is the thickness of an oil. Rated at 100,000 centistokes (cSt), this oil has the consistency of honey, so it stays in place.
Container | |||||||
---|---|---|---|---|---|---|---|
Viscosity, cSt | Size, oz. | Type | Temp. Range, °F | Color | With Detergent | Each | |
Silicone Synthetic Base Oil | |||||||
100,000 | 2 | Tube | -65° to 400° | Clear | No | 0000000 | 000000 |
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Viscosity, cSt | Size, oz. | Type | Temp. Range, °F | Color | With Detergent | Pkg. Qty. | Pkg. | |
Silicone Synthetic Base Oil | ||||||||
100,000 | 2 | Tube | -65° to 400° | Clear | No | 12 | 00000000 | 0000000 |
For hoses and other tight-fitting parts, apply these lubricants to rubber or plastic before assembling and disassembling. After drying, they lose their lubricity, so parts stay together. They leave no residue on assembled parts.
Semisynthetic-oil-based lubricants are a mix of synthetic and vegetable oil and are compatible with most plastic and rubber. They’re frequently used with hoses, O-rings, seals, and rubber grips. Water-based lubricants are designed for use with polyurethane and vinyl conveyor roller covers.
Container | |||||
---|---|---|---|---|---|
Size, oz. | Type | Temp. Range, °F | Compatible With | Each | |
Semisynthetic Oil Base | |||||
0.3 | Tube | 40° to 85° | Aluminum, Carbide, Cast Iron, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 000000 | 00000 |
16.1 | Bottle | 40° to 85° | Aluminum, Carbide, Cast Iron, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 000000 | 00000 |
16.1 | Spray Bottle | 40° to 85° | Aluminum, Carbide, Cast Iron, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 000000 | 00000 |
Water Base | |||||
32 | Spray Bottle | Not Rated | Aluminum, Brass, Carbide, Cast Iron, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
Container | ||||||
---|---|---|---|---|---|---|
Size, oz. | Type | Temp. Range, °F | Compatible With | Pkg. Qty. | Pkg. | |
Semisynthetic Oil Base | ||||||
0.3 | Tube | 40° to 85° | Aluminum, Carbide, Cast Iron, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 100 | 000000 | 0000000 |
16.1 | Bottle | 40° to 85° | Aluminum, Carbide, Cast Iron, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 12 | 000000 | 000000 |
16.1 | Spray Bottle | 40° to 85° | Aluminum, Carbide, Cast Iron, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 6 | 000000 | 00000 |
For use in food-processing and preparation areas, these lubricants are rated for incidental food contact. Coat tight-fitting parts with them before sliding together to make assembly easier.
Mineral-oil-based lubricants have a high load-carrying capacity and can lubricate sliding loads at low-to-medium speeds. Synthetic-oil-based lubricants have excellent moisture resistance.
Container | ||||||
---|---|---|---|---|---|---|
Size | Type | Temp. Range, °F | Specifications Met | Compatible With | Each | |
DuPont Molykote P-1900 Anti-Seize Paste—Mineral Base Oil | ||||||
1 lbs. | Can | -20° to 570° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 000000 | 000000 |
Lubricants—Synthetic Base Oil | ||||||
4 oz. | Tube | -40° to 350° | NSF Registered H1 | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 0000000 | 0000 |
Container | |||||||
---|---|---|---|---|---|---|---|
Size | Type | Temp. Range, °F | Specifications Met | Compatible With | Pkg. Qty. | Pkg. | |
Lubricants—Synthetic Base Oil | |||||||
4 oz. | Tube | -40° to 350° | NSF Registered H1 | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 12 | 00000000 | 000000 |
Coat tight-fitting metal parts, such as gears, clutches, and press-fit assemblies, with these lubricants before sliding them together to make assembly easier. Once assembled, they provide initial lubrication in equipment before oil has a chance to flow.
Mineral-oil-based lubricants, derived from petroleum, are more economical than synthetic-oil-based lubricants. Synthetic-oil-based lubricants last longer than mineral-oil-based lubricants.
Lubricants with moly (molybdenum disulfide) withstand high-pressure applications and have excellent wear resistance. Lubricants with graphite have additional pressure resistance and excellent temperature resistance. Lubricants with zinc prevent corrosion.
All Dupont Molykote lubricants have a high load-carrying capacity. Molykote M-77 Paste is commonly used on brakes and clutches; it is compatible with material that is damaged by mineral oil, such as natural rubber, SBR, and EPDM. As a paste it lubricates to 445° F; after drying, it continues to lubricate at temperatures up to 660° F. Molykote G-Rapid Plus Paste is often used to assemble threaded spindles, gears, screws, and pumps. It can be used as an initial lubricant. Molykote DX Paste has good corrosion resistance. It provides long-lasting lubrication after assembly.
Lubriplate No. 105 is often used to assemble motor and engine components. It has excellent moisture resistance.
Container | Each | Package | |||||||
---|---|---|---|---|---|---|---|---|---|
Size | Type | Additive | Temp. Range, °F | Compatible With | Each | Pkg. Qty. | Pkg. | ||
Mineral Base Oil | |||||||||
DuPont Molykote G-Rapid Plus Paste | |||||||||
8.8 oz. | Jar | Graphite, Moly | -30° to 840° | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 000000 | 000000 | 10 | 000000 | 0000000 |
DuPont Molykote G-Rapid Plus Spray | |||||||||
13.5 oz. | Aerosol Can | Graphite, Moly | -30° to 750° | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 000000 | 00000 | 12 | 000000 | 000000 |
DuPont Molykote DX Paste | |||||||||
2.2 lbs. | Can | __ | -15° to 255° | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 000000 | 000000 | __ | 000000 | 00 |
Lubriplate Lubriplate No. 105 | |||||||||
10 oz. | Tube | Zinc | -25° to 140° | Aluminum, Brass, Carbide, Cast Iron, Copper, Glass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 000000 | 0000 | 36 | 000000 | 000000 |
Synthetic Base Oil | |||||||||
DuPont Molykote M-77 Paste | |||||||||
33.3 oz. | Jar | Moly | -50° to 750° | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 000000 | 000000 | 12 | 000000 | 00000000 |