Also known as wall packs, these lights mount to exterior walls to illuminate building perimeters, entryways, loading docks, and other outdoor areas. No need for timers—a sensor automatically turns the light on at dusk and off at dawn. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other technologies. The lens is prismatic to disperse light evenly, and made of durable, impact-resistant polycarbonate.

Style A produce a neutral white light appearance.

Style B produce a cool light appearance, which highlights white/blue tones creating good visibility at night.

The prismatic, wraparound lens disperses light evenly from the sides as well as the bottom. A seal between the lens and housing keeps out humidity and dripping, splashing, and falling liquids. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They emit a neutral white light often found in workspaces. Lights can be hardwired to operate on any of the voltages listed.

Also known as jelly jar lights. These fixtures have a heat-resistant lens and a guard that protects the lens from breaking. Lights are sealed to keep out humidity and dripping, splashing, and falling liquids.

Lights with built-in LEDs last longer, are more efficient, and generate less heat than other light technologies. They emit a neutral white light often found in workspaces.

Lights without bulbs work with medium (standard household) screw-in base LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with a tempered glass lens are more impact resistant than those with a glass lens.

Lenses with a PFA-coating (sold separately) are more crack-resistant than glass and tempered-glass lenses.

Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. Use the switch on the power supply to choose between warm, cool, or neutral light—no more mismatched lights. All have passed strict U.S. and Canadian safety standards.

These lights are rated for protection against washdowns. A sealed lens keeps moisture out.

Style A and B have a wraparound lens that allows light to shine from the sides as well as the bottom. Style A have an acrylic lens that won’t turn yellow over time. Thread onto the ceiling using the 1/4”-28 mounting studs. Style B have a durable polycarbonate lens that’s more impact-resistant than acrylic. Use the included hardware to fasten to the ceiling.

Style C have a tubular lens that allows light to shine from all directions. The lens is acrylic so it won’t turn yellow over time. Lights are NSF C-2 rated for protection against washdowns in food processing areas.

Lights with built-in LEDs last longer, are more efficient, and generate less heat than other light technologies. They emit a neutral white light often found in workspaces.

Lights without bulbs work with tubular fluorescent bulbs (sold separately).

Use these lights in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 30-ft. high. They are UL Listed for Class I, Division 2, Groups A, B, C, and D for use in environments where ignitable concentrations of acetylene, hydrogen, ethylene, and propane occur infrequently, such as in the case of an accidental spill or failure of a ventilation system. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a neutral light appearance, which creates a balanced environment for general work areas. These lights produce a wide beam of uniform light. Lights can be hardwired to operate on any of the voltages listed. Thread onto 3/4 NPT conduit to suspend lights from the ceiling.

Also known as jelly jar lights. These fixtures have a heat-resistant lens and a guard that protects the lens from breaking. They are CSA certified for hazardous locations where flammable/combustible gases, vapors, and liquids may be present. They are rated NEMA 4X for protection against corrosion and washdowns. Lights are sealed to keep moisture out. They can be hardwired to operate on any of the voltages listed. Some work with LED, CFL, halogen, and incandescent bulbs (sold separately), while others accept fewer kinds.

Styles 1, 3, 5, 7, and 8 can be used in environments where ignitable concentrations of flammable/combustible gases, vapors, and liquids or combustible dust occur infrequently, such as in the case of an accidental spill or failure of a ventilation system, and where combustible/ignitable fibers or flyings are present under normal operating conditions and/or during frequent equipment maintenance or failure. Rated for Class I, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; and Class III, Divisions 1 and 2, these lights withstand acetylene, hydrogen, ethylene, propane, carbonaceous dusts, and nonconductive dusts.

Styles 2, 4, and 6 can be used in environments where ignitable concentrations of hazardous material are present under normal operating conditions, and/or during frequent equipment maintenance or failure. Rated for Class I, Divisions 1 and 2, Groups C and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2, these lights withstand ethylene, propane, conductive or metal dusts, carbonaceous dusts, nonconductive dusts, and combustible/ignitable fibers or flyings.

These lights are UL listed for hazardous locations where flammable/combustible gases, vapors, and liquids may be present. They are rated NEMA 4X/IP66 for protection from corrosion and washdowns. Lights have a sealed lens and corrosion resistant housing. They can be hardwired to operate on any of the voltages listed.

Style 1 can be used where ignitable concentrations of hazardous material occur infrequently, such as in the case of an accidental spill or failure of a ventilation system. Rated for Class I, Division 2, Groups A, B, C, and D, these lights withstand acetylene, hydrogen, ethylene, and propane.

Style 2 can be used where ignitable concentrations of hazardous material are present under normal operating conditions, and/or during frequent equipment maintenance or failure. Rated for Class I, Divisions 1 and 2, Groups C and D; Class II, Divisions 1 and 2, Groups E, F, and G; Class III, Divisions 1 and 2, these lights withstand ethylene, propane, conductive or metal dusts, carbonaceous dusts, nonconductive dusts, and combustible/ignitable fibers or flyings.

Fastener-mount lights have a stainless steel housing that resists corrosion better than aluminum. They require tubular fluorescent bulbs (sold separately). They have an acrylic lens that won't turn yellow over time.

Thread-on lights have a lightweight aluminum housing. They include bulbs with a cool light appearance, which highlights white/blue tones and is good for inspecting. Lights have two female connections—thread onto 1/2 NPT conduit to suspend lights from the ceiling.

These fixtures disperse light from the top, bottom, and side to produce ambient lighting. They mount to the wall so they're often used in enclosed spaces such as stairwells, hallways, and storage rooms. Rated for use in damp locations, these lights withstand humidity and moisture. The lens is grooved or smooth and frosted to disperse light evenly.

Lights without bulbs work with tubular fluorescent bulbs (sold separately).