Use this low-VOC paint in enclosed spaces to stop rust from starting and prevent existing rust from spreading.

Match the manufacturers' color of your forklift, lift truck, or pallet truck to cover scratches and wear.

This paint resists heat and automotive fluids for use on engines. Match the color to your manufacturers' equipment color.

Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.

This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries.

Hide nicks and scratches on metal surfaces with this textured-finish paint. It stops rust from starting and prevents existing rust from spreading.

This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.

Make your surface magnetic with this paint.

Create a washable writing surface.

Spray this paint on the back of glass or clear plastic to create a reflective silver effect on the other side.

Mark traffic lanes, parking lots, and factory floors.

Unlike other marking paint, this paint sprays in the upright position and dries fast, so it won't drip when applied overhead.

This paint adheres to most types of plastic without sanding or priming.

Restore existing water- and smoke-stained ceiling tiles to their original appearance.

Stain and seal in one application to protect and refresh the appearance of wood surfaces.

Spray this paint onto trees, logs, or cut wood—even in the rain—to create a bright mark that can be seen at a distance.

This water-based paint sprays in an inverted position and will not harm grass or other plant life.

This paint lays on thicker than other turf marking paint, making cleaner, bolder lines. It is water based and will not harm grass or other plant life.

These coatings are used in enclosed, high-traffic spaces. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.

Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention.

Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.

Protect surfaces against chemical fumes and splashes. These coatings resist acids, alkalies, and inorganic salts. They’re highly durable and have excellent adhesion.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface.

Able to withstand temperatures of up to 2000° F, these coatings absorb heat and release it later. Use them to improve the thermal efficiency of heaters, furnaces, and ovens to reduce energy costs. Also known as high-emissivity coatings.

These coatings provide chemical, corrosion, and impact resistance on grit-blasted concrete and primed steel in immersion, underground, and waste-water treatment applications.

Spray these coatings on glass to create a clear, scratch-resistant surface that repels oil and water. They’re also known as oleophobic and hydrophobic coatings.

Put a temporary dull finish on glossy surfaces. Wipe to remove.

Also known as antifouling paint, the copper additive in these coatings prevents organic material, such as algae, barnacles, and slime from attaching to the surface. Use on boats, submerged structures, and inside tanks.

Apply these coatings directly to rust to prevent it from spreading and to stop new rust from forming. Often used on containers, trailers, and in marine restoration, they create a durable, impact-resistant surface that permanently stops rust.

Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.

Cover sharp edges, corners, and weld seams with these thick epoxy coatings for protection against cuts and snags.

Tough and long-lasting, these flexible coatings protect against rust and corrosion.

Protect brass, bronze, copper, and silver from moisture, chemicals, oxidation, and abrasion.

These zinc-rich coatings offer the protection of hot-dip galvanizing to keep iron and steel free of rust and corrosion.

For use with steel and iron parts, these kits create a flat, black protective finish that resists corrosion and reduces glare. Use as an alternative to purchasing black-oxide tools.

Use these dyes after anodizing and before sealing to add a decorative appearance.

Use these dyes at the end of your zinc-plating process to add a decorative appearance.

A hard waxy film protects items from abrasion. Coatings provide long-lasting protection against rust and corrosion. Remove with an alkaline cleaner.

Protect metal parts from corrosion. Also known as rust-inhibiting film, these coatings can be removed with a simple degreaser or mineral spirits.

These soft, pliable coatings add cushion and absorb shock. Use them to protect tools, dies, and other parts during shipping and storage. Once removed, coatings can be melted again for repeat use.

Protect tools, dies, and other parts during shipping and storage with these durable peel-away coatings. They resist abrasion, moisture, and corrosion. Once removed, coatings can be melted again for repeat use.

These coatings are NSF registered H1 for incidental food contact. Designed to protect food-processing equipment from corrosion after washdowns, use them to seal metal surfaces, resist moisture, and lubricate moving parts between processes.

Use these solvent-free, high-gloss coatings to protect concrete floors in enclosed areas. Durable enough for forklift traffic, they resist stains, moisture, and chemicals.

Protect concrete from mild chemicals, salts, soaps, and detergents.

Commonly used by electronics manufacturers and research labs, apply these coatings to floors and walls to protect equipment from static electricity buildup.

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.

Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation.

Hot-melt potting compounds have excellent flexibility, good chemical and moisture resistance, and withstand a range of temperatures. They provide good electrical insulation.

Change the mix ratio of these heat-transfer potting compounds to achieve the right hardness for your application.

To effectively dissipate heat in the tightest spaces, this coating contains a filler that acts like a shim to produce a consistent 0.005" to 0.006" gap between components.

Clear enough to read through, this coating allows optimal light transmission for use with LEDs, solar cells, and fiber optics.

This coating is formulated for use in sensitive applications such as manufacturing semiconductors.

Dry to the touch in only 3 minutes, use this coating to protect circuit boards from moisture without delaying your process for drying.

Seal rotting wood to prevent further damage while adding strength to the remaining wood fibers.

Repel spills and block stains without changing the look of fabric or upholstery.

These silicone-based coatings renew leather and vinyl surfaces and protect against UV damage, dirt, and ozone.

Also known as castor oil, use these to lubricate and preserve leather.

These coatings reflect up to 60% of the sun's rays. They also restore and reinforce your roof by forming a water-resistant seal.

Use these coatings to form a water-resistant layer to restore and reinforce your roof.

Spray these coatings on grout to form a barrier against dirt, water, mildew, and discoloration.

Seal brick, mortar, and concrete to prevent water damage. These coatings create a thin, clear layer that sits on the surface of masonry and repels water.

Grit in these coatings provides traction and fills hairline cracks. Coatings form a weather- and water-resistant seal to protect and revitalize asphalt surfaces.

Get the power of a two-part epoxy primer in an easy-to-use aerosol can. These primers have excellent chemical and corrosion resistance. Spray them on uncoated or rusty metal to extend the life of paint and coatings.

A high concentration of zinc gives these primers excellent corrosion resistance for protecting steel—when exposed to moisture and chemicals, the zinc rusts before the underlying steel can. They’re often used with structural steel.

These primers convert rust into a layer of protection that prevents new rust from forming. Use them to prepare your surface to extend the life of paint and coatings.

Use these primers on metal surfaces in enclosed occupied areas, such as hospitals, schools, and offices. They have excellent resistance to moisture and corrosion and bond well to metal to extend the life of paint and coatings.

Prepare metal, wood, and concrete for paint. Primers adhere to underlying surfaces to create a base layer that bonds well with paint for a long-lasting finish.

Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.

These primers fill surface cracks and are sandable for a smooth basecoat. Use them to prepare your surface to extend the life of paint and coatings.

These thin primers penetrate deeply into concrete floors to create a hard surface that can then be coated with any urethane or epoxy coating.

These primers have excellent adhesion to plastic. Use them to prepare your surface to extend the life of paint and coatings.

Pull the trigger on these dispensers to release a line of paint.

The five-digit counter on these dispensers measures distance as you go. Pull the trigger to release a line of paint.

For general purpose applications, these knitted rollers leave behind a textured finish that hides blemishes and uneven spots.

For an extra-smooth finish, use these woven mohair roller covers. When used on very smooth surfaces, such as metal or cabinetry, they create a finish similar to that of a paint sprayer.

Made from foam, these paint roller covers don't have any fibers to shed. When used on very smooth surfaces, they create a finish similar to that of a paint sprayer.

These frames have a telescoping handle that extends from 18" to 34".

Cover large areas quickly without the need for a paint tray. These rollers have a tube that draws paint into the handle. Squeeze the trigger to keep the roller filled with fresh paint as you go.

These frames adjust to hold 12", 14", and 18" wide roller covers, so you can take on different-sized jobs with the same frame. Use them to cover large, flat surfaces quickly.

For quick jobs without the clean-up, these rollers come with a small plastic tray.

Fill the bottle-like handle on these rollers with paint and dispense as you roll, so you don't have to stop at a paint tray. Rollers are short for quick touch-up jobs or to fit in tight spaces.

Coat large curved surfaces of various sizes with these rollers. They provide well-rounded coverage when painting columns, cylinders, pipes, and other curved surfaces.

Add length to your roller with these adjustable handles.

Give thick coatings a smooth finish with these hard phenolic roller covers. Designed to apply anti-slip coatings to floors, they can also be used with epoxies and other thick protective coatings.

Tiny spikes covering these rollers release trapped gas when rolled over thick self-leveling floor coatings to promote adhesion and aid in the self-leveling process.

Minimize waste of paint and coatings—these sprayers produce less overspray than our other air-powered sprayers.

Replace the disposable spray heads on these guns after each use for the performance of a new spray gun without having to clean them. High-volume/low-pressure sprayers produce less overspray than other air-powered sprayers to minimize paint waste.

These tanks are built to ASME specifications. Use them with your paint sprayer for high-volume application of paint and coatings.

Aluminum cups are more durable than plastic cups. Keep extras ready for easy color changes while spraying.