McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    12 Products

    Paint for Plastic

    Image of Product. Front orientation. Paint. Paint for Plastic.
    This paint adheres to most types of plastic without sanding or priming.
    Dry Time
    Each
    Container
    Net Wt., oz.
    Solution
    Type
    Touch,
    min.
    Overall,
    hr.
    Approx. Coverage
    @ Thk.
    Spray
    Position
    Max. Temp.,
    ° F
    For Use
    Outdoors
    For Use On
    Choose a Color (Appearance)
    1-5
    6-Up
    Alkyd—Aerosol Can
    12Solvent Based202410 ft² @ 1.5 milUpright90YesABS, PVC, Vinyl Plastic
    Black (Gloss)
    ,
    Blue (Gloss)
    ,
    Gray (Gloss)
    ,
    Green (Gloss)
    ,
    Orange (Gloss)
    ,
    Red (Gloss)
    ,
    Tan (Gloss)
    ,
    White (Gloss)
    ,
    Yellow (Gloss)
    		00000000000000000
     

    Water-Resistant Surface Fillers

    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Can, Jar.
    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Tube.
    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Jar, Bottle.

    Epoxy

    Can, Jar

    Epoxy

    Tube

    Epoxy

    Jar, Bottle

    Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.
    Paste—Paste fillers resist alkalies, solvents, gasoline, and oil.
    Container
    Temp.
    Range
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.,
    ° F
    Color
    Process After Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    2Tube560 min.PasteYes1:112 in² @ 1/4"1/2"YesNot Rated200GrayMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood0000000000000
    2Jar, Bottle2024 hr.PasteYes5:18 1/2 in² @ 1/4"1 1/2"YesNot Rated185WhiteMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood000000000000
    2Jar, Bottle2024 hr.PasteYes5:18 1/2 in² @ 1/4"1 1/2"YesNot Rated250GrayMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood000000000000
    14Can, Jar2024 hr.PasteYes5:162 in² @ 1/4"1 1/2"YesNot Rated185WhiteMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood000000000000
    14Can, Jar2024 hr.PasteYes5:162 in² @ 1/4"1 1/2"YesNot Rated250GrayMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood000000000000
     

    Surface Filler Patches

    Image of Product. Front orientation. Surface Fillers. Surface Filler Patches.
    Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
    Container
    Type
    Lg.
    Wd.
    Begins to
    Harden, min.
    Reaches Full
    Strength, min.
    Mixing
    Req.
    Mix
    Ratio
    For Use
    Outdoors
    Max. Temp.,
    ° F
    Color
    Process After
    Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    Patch4"6"130Yes1:1Yes425ClearSandAluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, SBR, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood00000000000000
     

    Fuel-Resistant Surface Fillers

    Image of Product. Front orientation. Surface Fillers. Fuel-Resistant Surface Fillers.
    Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.
    1.5 pt. Container—1.5-pint container can treat a 10-gallon fuel tank.
    3 pt. Container—3-pint container can treat a 20-gallon fuel tank.
    Container
    Temp.
    Range, ° F
    Size,
    pt.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After
    Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    1.5Can524Thick LiquidYes2:1No7090AmberDrill, Sand, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass0000000000000
    3Can524Thick LiquidYes2:1No7090AmberDrill, Sand, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass000000000000
     

    Goo Gone Paint and Coating Removers

    Clean up water-based paint messes without damaging the surface underneath. In addition to wet and dry paint, these cleaners also remove varnish, shellac, and caulk. They cling to vertical surfaces, such as wood baseboards and trim, to easily remove spills and splatter. Use them on floors, brushes, tools, and ladders as well.
    Note: Not for use on painted surfaces or PVC.
    Spray Bottles
    Image of Product. Front orientation. Paint and Coating Removers. Goo Gone Paint and Coating Removers.
    Cannot Be Sold To—Removers that cannot be sold to the listed regions are restricted by product labeling requirements and/or import regulations.
    Each
    Package
    Container
    Size, fl. oz.
    Solution
    Type
    Harshness
    For Use On
    For Removing
    Cannot Be
    Sold To
    Each
    Pkg.
    Qty.
    Pkg.
    Liquids
    24Water BasedModerateAluminum, Carpet, Ceramic, Chrome, Fabric, Fiberglass, Galvanized Steel, Glass, Iron, Plastic, Porcelain, Stainless Steel, Steel, Stone, Vinyl Plastic, Waxed FloorsCaulk, Sealants, Latex-Based PaintCanada00000000000000400000000000000
     

    Surface Fillers for Plastic

    Image of Product. Front orientation. Surface Fillers. Surface Fillers for Plastic, Urethane Rubber, Can.

    Urethane Rubber

    Can

    Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.
    Flexane 80 Putty—Devcon Flexane 80 Putty can be used with vinyl plastic and rubber.
    Container
    Temp.
    Range, ° F
    Mfr. Model
    No.
    Net Wt.,
    lb.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, day
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After
    Hardening
    For Use On
    Each
    Devcon Flexane 80 Putty
    158201Can207PuttyYes2.6:190 in² @ 1/4"1/2"Yes-40180BlackSandVinyl Plastic, EPDM, SBR00000000000000
     
    back to top