This paper is double-bagged to keep out contaminates and meets Fed. Std. Class 100 and ISO Class 5 clean room standards.

Print signs, labels, checklists, and packing slips for use around food processing lines without the risk of contaminating the food. A thin layer of aluminum foil is laminated within this paper, so it can be picked up by a metal detector if any piece of it falls into your line.

These note pads come double-bagged to keep out contaminates and meet Fed. Spec. Class 100 and ISO Class 5 clean room standards.

Scribble notes, record measurements, and make plans, even in wet and dirty environments—the sheets in these pads are coated to repel water, oil, mud, and grease.

Take notes, make lists, or doodle.

Also known as newsprint, this paper is a clean, low-cost fill material.

Two sheets of paper are layered and reinforced with high-strength fiberglass to withstand wrapping around heavy products.

The raised pattern provides absorbency as well as extra thickness for sharp or heavy items. This paper works well as an interleaving material.

These pallet liners have a layer of hexagonal cells instead of typical corrugation, so they distribute loads better than standard cardboard liners.

Also known as newsprint, this paper is a clean, low-cost fill material.

This paper is good as an outer wrap for parcels or as packing fill. Also known as kraft paper.

Shield iron, steel, stainless steel and tin from corrosion.

The multilayered tissue in this wrap soaks up spills and moisture while also insulating and cushioning contents.

Create smooth finishes on wood.

Keep sanding sheets of various grits on hand.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

These assortments include three cut-to-length sanding rolls of various grits in a convenient dispenser.

The soft abrasive is good for fine hand-polishing of soft nonferrous metals. Also known as crocus cloth.

These sheets resist deterioriation when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

Assortments include three cut-to-length sanding rolls of various grits that resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents.

A coating prevents dust and debris from building up on the abrasive surface.

Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes.

A cushioned layer gives you more control over sanding pressure, creating finer and more consistent finishes. These rolls can be cut to length.

The long sides are angled 75°.

Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block.

These sponges conform exceptionally well to small, contoured surfaces.

A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface. These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have a long-lasting diamond abrasive on one side.

These sheets have a long-lasting diamond abrasive.

Cut the length you need, then stick to your sanding tool. When it's time to change the sheet, peel it off.

These sheets have a long-lasting diamond abrasive.

Quickly attach, remove, and reuse.

Cut to convenient sizes and shapes, these fit most sheet sanders.

Quickly attach, remove, and reuse these hook-and-loop sheets with triangular detail sanders.

Peel and stick to your file handle. When it’s time to change the sheet, peel it off.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

These discs are abrasive-embedded cloth with a cushioned layer.

Holes allow dust removal when used with a vacuum sander.

The premium abrasive stays sharp longer. Holes in the disc let you see the surface you’re sanding.

The premium abrasive stays sharp longer.

Fit these discs over your tool’s arbor to sand stainless steel and hard metals.

Fit these discs over your tool's arbor to sand aluminum, soft metals, and nonmetals.

The premium abrasive stays sharp longer.

With more flaps than standard discs, these last 30-40% longer.

With more flaps than standard discs, these last 30-40% longer.

The backing plate on these discs can be sheared away as the abrasive flaps wear down, allowing you to use more of the disc rather than replacing with a new one.

Use these discs with commercial floor buffing machines to sand wood floors.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

Set at an angle and widely spaced, the flaps reach into corners.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

Use with 6" x 9" pads.

Create high quality technical drawings with this vellum paper that is designed to work in laser printers.

Dip these strips into your liquid to quickly test water conditions.

Press onto your magnet and pole locations show up as dark green.

Fill in the blank with your own custom warnings, labels, and messages. You can write on these signs with markers, add color with paint, or stick on adhesive-back characters. Many even work with printers.