Height Height |
|---|
|
Individual/Set Individual/Set |
|---|
|
Container Type Container Type |
|---|
|
Parallels
Place a parallel against each vise jaw to create a rest for your workpiece. Precision ground to tight tolerances, these matched pairs raise the workpiece within a vise to allow more clearance for cutting tools.
Parallels with two precision-ground sides have a parallel tolerance of 0.0001" on the top and bottom edges.
Parallels with four precision-ground sides have tight parallel tolerances on the top edge, bottom edge, and both faces.
6" long parallels are ground to 0.0001"; 12" long parallels are ground to 0.0002".
| Lg. | Thick. | Parallel Tolerance | Material | Choose a Ht. | Pair | |
2 Precision-Ground Sides | ||||||
|---|---|---|---|---|---|---|
| 6" | 1/4" | 0.0001" | Steel | 000000 | 000000 | |
4 Precision-Ground Sides | ||||||
| 6" | 1/4" | 0.0001" | Steel | 1/2" | 0000000 | 000000 |
| 6" | 1/4" | 0.0001" | Steel | 3/4" | 0000000 | 000000 |
| 6" | 3/8" | 0.0001" | Steel | 3/4" | 0000000 | 000000 |
| 6" | 1/2" | 0.0001" | Steel | 1" | 0000000 | 000000 |
| 12" | 3/4" | 0.0002" | Steel | 1" | 0000000 | 000000 |
| 12" | 1" | 0.0002" | Steel | 2" | 0000000 | 000000 |
Sets of Parallels
Sets include multiple sizes of matched pairs that are precision ground for tight tolerances on the top and bottom edges. Place a parallel against each vise jaw and rest your workpiece on top to raise it within the vise and allow more clearance for cutting tools.
| No. of Pairs | Lg. | Thick. | Ht. | Parallel Tolerance | Material | Container Type | Each | |
2 Precision-Ground Sides | ||||||||
|---|---|---|---|---|---|---|---|---|
| 9 | 6" | 1/4" | 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" | 0.0001" | Steel | Wood Case | 0000000 | 0000000 |
| 9 | 6" | 1/4" | 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16" | 0.0001" | Steel | Wood Case | 0000000 | 000000 |
| 10 | 6" | 1/8" | 1/2", 5/8", 3/4", 7/8", 1", 1 1/8", 1 1/4", 1 3/8", 1 1/2", 1 5/8" | 0.0008" | Steel | Plastic Case | 00000000 | 000000 |
| 20 | 6" | 1/32" | 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 9/16", 1 5/8", 1 11/16" | 0.0001" | Steel | Plastic Case | 000000 | 000000 |
| 22 | 6" | 1/4" | 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 9/16", 1 5/8", 1 11/16", 1 3/4", 1 13/16" | 0.0001" | Steel | Wood Case | 0000000 | 00000000 |
| No. of Pairs | Lg., mm | Thick. | Ht. | Parallel Tolerance, mm | Material | Container Type | Each | |
2 Precision-Ground Sides | ||||||||
|---|---|---|---|---|---|---|---|---|
| 20 | 100 | 2 mm 3 mm 4 mm 5 mm 6 mm | 5 mm, 10 mm, 15 mm, 20 mm 6 mm, 11 mm, 16 mm, 21 mm 7 mm, 12 mm, 17 mm, 22 mm 8 mm, 13 mm, 18 mm, 23 mm 9 mm, 14 mm, 19 mm, 24 mm | 0.01 | Steel | Wood Stand | 0000000 | 0000000 |
Adjustable Parallels
Instead of keeping an assortment of parallels on hand, adjust these two-piece tools to your exact height requirements. Loosen the screw and slide the pieces in and out. When the desired height is achieved, tighten the screw. Parallels are precision ground on the top and bottom edges and are often used in pairs. Place a parallel against each vise jaw and rest your workpiece on top to raise it within the vise and allow more clearance for cutting tools.
| Lg. | Ht. Range | Thick. | Parallel Tolerance | Material | Each | |
2 Precision-Ground Sides | ||||||
|---|---|---|---|---|---|---|
| 1 3/4" | 3/8"-1/2" | 9/32" | 0.0005" | Steel | 0000000 | 000000 |
| 2 1/8" | 1/2"-11/16" | 9/32" | 0.0005" | Steel | 0000000 | 00000 |
| 2 11/16" | 11/16"-15/16" | 9/32" | 0.0007" | Steel | 0000000 | 00000 |
| 3 9/16" | 15/16"-1 5/16" | 9/32" | 0.0007" | Steel | 0000000 | 00000 |
| 4 3/16" | 1 5/16"-1 3/4" | 9/32" | 0.0009" | Steel | 0000000 | 00000 |
| 5 1/16" | 1 3/4"-2 1/4" | 9/32" | 0.0009" | Steel | 0000000 | 00000 |
Sets of Adjustable Parallels
Adjust these two-piece parallels to your exact height requirements. Loosen the screw and slide the pieces in and out. When the desired height is achieved, tighten the screw. Parallels are precision ground on the top and bottom edges and are often used in pairs. Place a parallel against each vise jaw and rest your workpiece on top to raise it within the vise and allow more clearance for cutting tools.
| No. of Pieces | Includes | Thick. | Material | Container Type | Each | |
2 Precision-Ground Sides | ||||||
|---|---|---|---|---|---|---|
| 4 | One 3/8" to 1/2" High Parallel (1 3/4" Lg.) One 1/2" to 11/16" High Parallel (2 1/8" Lg.) One 11/16" to 15/16" High Parallel (2 11/16" Lg.) One 15/16" to 1 5/16" High Parallel (3 9/16" Lg.) | 9/32" | Steel | Plastic Pouch | 0000000 | 0000000 |
| 6 | One 3/8" to 1/2" High Parallel (1 3/4" Lg.) One 1/2" to 11/16" High Parallel (2 1/8" Lg.) One 11/16" to 15/16" High Parallel (2 11/16" Lg.) One 15/16" to 1 5/16" High Parallel (3 9/16" Lg.) One 1 5/16" to 1 3/4" High Parallel (4 3/16" Lg.) One 1 3/4" to 2 1/4" High Parallel (5 1/16" Lg.) | 9/32" | Steel | Plastic Pouch | 0000000 | 000000 |
Parallel Straightedges
Level machinery, check surface flatness, and scribe work positions. The top and bottom faces are precision ground within 0.0001" per 12".