Connectors secure with a quarter turn when mated, yet unlock and pull apart with minimal force. All have the same pin and socket configurations as MIL-DTL-26482, so they are compatible with other products that meet the same standard. They’re rated IP67 to protect against washdowns. When mating connectors, the gender and housing lock location must be opposite.

Crimpers (sold separately) are required for wire installation.

For technical drawings and 3-D models, click on a part number.

Rated to MIL-DTL-26482 specifications, these connectors are compatible with other products that meet the same standard. They lock in place with a quarter turn to remain secure in high-vibration environments. All come assembled with pins and sleeves in place; poles are numbered. When mating, the gender and housing lock location must be opposite.

For technical drawings and 3-D models, click on a part number.

Protect connections while maintaining access. The base and hood latch together securely, yet can be quickly detached for equipment repair or replacement. They’re rated NEMA 12 for protection from dirt and oil/coolant dripping and IP65 for protection against water projected from a nozzle.

Aluminum connectors are rated NEMA 4X for protection against corrosion.

For technical drawings and 3-D models, click on a part number.

Rated NEMA 4X, 12, and IP65, connectors protect against corrosion, washdowns, oil/coolant dripping, and water projected from a nozzle. They have a rubber seal and stainless steel hardware for excellent chemical resistance. Use them to protect connections while maintaining access. The base and hood latch together securely, yet can be quickly detached for equipment repair or replacement.

For technical drawings and 3-D models, click on a part number.

Able to carry more than twice the current of standard latching signal/power connectors, these can be used with thermosensors or brakes on large motors. Use them to protect connections while maintaining access. The base and hood latch together securely, yet can be quickly detached for equipment repair or replacement. They’re rated NEMA 4X, 12, and IP65 for protection against corrosion, washdowns, dirt, oil/coolant dripping, and water projected from a nozzle.

4-pole connector has two control pins to prevent arcing if it is disconnected before the power is turned off.

For technical drawings and 3-D models, click on a part number.

Configure a connector for your application—combine male and female inserts with a base and a hood. Select components based on the number of poles needed. To protect connections while maintaining access, the base and hood latch together securely, yet can be quickly detached for equipment repair or replacement. Once assembled, these connectors are rated NEMA 4X, 12, and IP65 for protection against corrosion, washdowns, dirt, oil/coolant dripping, and water projected from a nozzle.

For technical drawings and 3-D models, click on a part number.

Combine power, USB, computer, and compressed air inserts to build a connector that sends signal, power, and data. A complete connector requires a hood, a base, two frames, and a male and female insert for each slot in the frame. The frames fit into the hood and base, and the inserts snap into the frame. Select components based on the number of slots needed. Once assembled, connectors are rated NEMA 4 and 12 for protection against dirt, washdowns, and oil/coolant dripping.

Use USB adapters with USB holders to connect two male USB cords.

Crimpers (sold separately) are required for wire installation for crimp-on connectors. They ratchet to ensure the correct pressure is applied to every crimp.

Use positioners (sold separately) with crimpers to hold pins and sleeves at the correct height while crimping.

Extraction tools (sold separately) make it easier to remove pins from 17- and 20-pole power inserts.

Insertion/Extraction tools (sold separately) make it easier to install DB25 inserts.

For technical drawings and 3-D models, click on a part number.

Carry up to four times the current of standard compact latching signal/power connectors. To protect connections while maintaining access, the base and hood latch together securely, yet can be quickly detached for equipment repair or replacement. They’re rated NEMA 4, 12, and IP65 for protection against dirt, washdowns, oil/coolant dripping, and water projected from a nozzle.

For technical drawings and 3-D models, click on a part number.