Filter by
Knob-Grip Quick-Release Pins
A high-profile knob is easy to grip, but fits in small spaces. Pins have a spring-loaded ball that pops out when the pin is pushed into a hole, and retracts when the pin is pulled out. For the best fit, the hole should be as close to the diameter as possible, but not larger than the diameter at extended ball height. Pins are made of 18-8 stainless steel for a balance of strength and corrosion resistance. The head has a hole to add a ring and lanyard (sold separately). Breaking strength is measured as single shear, which is the force required to break a pin into two pieces.
For technical drawings and 3-D models, click on a part number.
Usable Lg., mm | Dia. Tolerance, mm | Dia. at Extended Ball Ht., mm | Min. Hardness | Breaking Strength, lbs. | Handle Material | Each | |
18-8 Stainless Steel | |||||||
---|---|---|---|---|---|---|---|
6 mm Dia. | |||||||
25 | -0.08 to -0.04 | 6.5 | Brinell 150 | 4,900 | Nylon Plastic | 000000000 | 000000 |
30 | -0.08 to -0.04 | 6.5 | Brinell 150 | 4,900 | Nylon Plastic | 000000000 | 00000 |
50 | -0.08 to -0.04 | 6.5 | Brinell 150 | 4,900 | Nylon Plastic | 000000000 | 00000 |
8 mm Dia. | |||||||
25 | -0.08 to -0.04 | 8.7 | Brinell 150 | 8,900 | Nylon Plastic | 000000000 | 00000 |
30 | -0.08 to -0.04 | 8.7 | Brinell 150 | 8,900 | Nylon Plastic | 000000000 | 00000 |
50 | -0.08 to -0.04 | 8.7 | Brinell 150 | 8,900 | Nylon Plastic | 000000000 | 00000 |
10 mm Dia. | |||||||
25 | -0.08 to -0.04 | 12 | Brinell 150 | 13,900 | Nylon Plastic | 000000000 | 00000 |
30 | -0.08 to -0.04 | 12 | Brinell 150 | 13,900 | Nylon Plastic | 000000000 | 00000 |
50 | -0.08 to -0.04 | 12 | Brinell 150 | 13,900 | Nylon Plastic | 000000000 | 00000 |
12 mm Dia. | |||||||
30 | -0.08 to -0.04 | 14.5 | Brinell 150 | 20,000 | Nylon Plastic | 000000000 | 00000 |
40 | -0.08 to -0.04 | 14.5 | Brinell 150 | 20,000 | Nylon Plastic | 000000000 | 00000 |
50 | -0.08 to -0.04 | 14.5 | Brinell 150 | 20,000 | Nylon Plastic | 000000000 | 00000 |