Diameter Diameter |
---|
Material Material |
---|
|
Performance Properties Performance Properties |
---|
For Use With For Use With |
---|
Comparable To Comparable To |
---|
Hardness Hardness |
---|
|
Density Density |
---|
|
Friction Rating Friction Rating |
---|
|
Clarity Clarity |
---|
![]() |
Clear |
![]() |
Semi-Clear |
![]() |
Opaque |
Tensile Strength Tensile Strength |
---|
|
Dielectric Strength Dielectric Strength |
---|
|
Impact Strength Impact Strength |
---|
|
Specifications Met Specifications Met |
---|
|
More
Able to hold tight tolerances, these balls resist expanding when exposed to heat and moisture. They have a naturally slippery, wear-resistant surface. Use them for bearings and low-load rolling applications. Delrin® acetal resin is also known as acetal homopolymer.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance | Pkg. Qty. | Pkg. | |
Inch | ||||
---|---|---|---|---|
1/16" | -0.001" to 0.001" | 100 | 000000 | 00000 |
3/32" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
1/8" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
9/64" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
5/32" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
3/16" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
7/32" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
1/4" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
9/32" | -0.001" to 0.001" | 25 | 0000000 | 0000 |
5/16" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
3/8" | -0.001" to 0.001" | 100 | 0000000 | 00000 |
7/16" | -0.001" to 0.001" | 50 | 0000000 | 00000 |
1/2" | -0.001" to 0.001" | 50 | 0000000 | 00000 |
9/16" | -0.001" to 0.001" | 25 | 0000000 | 0000 |
5/8" | -0.001" to 0.001" | 25 | 000000 | 00000 |
3/4" | -0.001" to 0.001" | 10 | 0000000 | 0000 |
13/16" | -0.001" to 0.001" | 1 | 0000000 | 0000 |
7/8" | -0.001" to 0.001" | 10 | 0000000 | 00000 |
15/16" | -0.001" to 0.001" | 1 | 0000000 | 0000 |
1" | -0.001" to 0.001" | 10 | 0000000 | 00000 |
1 1/8" | -0.002" to 0.002" | 1 | 0000000 | 0000 |
1 1/4" | -0.002" to 0.002" | 1 | 0000000 | 0000 |
1 1/2" | -0.002" to 0.002" | 1 | 0000000 | 0000 |
2" | -0.002" to 0.002" | 1 | 0000000 | 0000 |
Metric | ||||
2mm | -0.0254mm to 0.0254mm | 100 | 0000000 | 0000 |
3mm | -0.0254mm to 0.0254mm | 100 | 0000000 | 0000 |
3.5mm | -0.0254mm to 0.0254mm | 100 | 0000000 | 0000 |
4mm | -0.0254mm to 0.0254mm | 100 | 0000000 | 0000 |
5mm | -0.0254mm to 0.0254mm | 100 | 0000000 | 0000 |
8mm | -0.0254mm to 0.0254mm | 50 | 0000000 | 0000 |
Use these nylon 6/6 balls as bearings and in sealing applications. They have a slippery surface that reduces wear caused by friction.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance | Pkg. Qty. | Pkg. | |
Inch | ||||
---|---|---|---|---|
1/16" | -0.002" to 0.002" | 100 | 0000000 | 000000 |
3/32" | -0.002" to 0.002" | 100 | 0000000 | 0000 |
1/8" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
5/32" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
3/16" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
7/32" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
1/4" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
9/32" | -0.001" to 0.001" | 100 | 0000000 | 00000 |
5/16" | -0.001" to 0.001" | 100 | 0000000 | 00000 |
3/8" | -0.001" to 0.001" | 100 | 0000000 | 00000 |
7/16" | -0.002" to 0.002" | 100 | 0000000 | 00000 |
1/2" | -0.001" to 0.001" | 50 | 0000000 | 00000 |
9/16" | -0.001" to 0.001" | 50 | 0000000 | 00000 |
5/8" | -0.002" to 0.002" | 10 | 0000000 | 0000 |
3/4" | -0.001" to 0.001" | 10 | 0000000 | 0000 |
7/8" | -0.001" to 0.001" | 10 | 0000000 | 00000 |
1" | -0.001" to 0.001" | 5 | 0000000 | 0000 |
1 1/2" | -0.002" to 0.002" | 1 | 0000000 | 0000 |
1 3/4" | -0.002" to 0.002" | 1 | 0000000 | 0000 |
2" | -0.002" to 0.002" | 1 | 0000000 | 00000 |
Metric | ||||
2mm | -0.002" to 0.002" | 100 | 0000000 | 0000 |
5mm | -0.001" to 0.001" | 100 | 0000000 | 00000 |
6mm | -0.001" to 0.001" | 25 | 0000000 | 00000 |
Resistant to swelling when exposed to water, these balls are often used in laboratory applications.
Hollow balls float. Use them in tanks to slow evaporation and reduce heat loss.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance | Specifications Met | Pkg. Qty. | Pkg. | |
Solid | |||||
---|---|---|---|---|---|
1/8" | -0.002" to 0.002" | __ | 500 | 000000 | 00000 |
5/32" | -0.002" to 0.002" | __ | 500 | 000000 | 0000 |
3/16" | -0.002" to 0.002" | __ | 500 | 000000 | 00000 |
7/32" | -0.002" to 0.002" | __ | 250 | 000000 | 0000 |
1/4" | -0.002" to 0.002" | __ | 250 | 0000000 | 0000 |
9/32" | -0.002" to 0.002" | __ | 100 | 000000 | 00000 |
5/16" | -0.002" to 0.002" | __ | 250 | 0000000 | 00000 |
3/8" | -0.002" to 0.002" | __ | 100 | 0000000 | 0000 |
0.4" | -0.002" to 0.002" | __ | 15 | 0000000 | 0000 |
7/16" | -0.002" to 0.002" | __ | 50 | 000000 | 00000 |
1/2" | -0.002" to 0.002" | __ | 100 | 0000000 | 00000 |
5/8" | -0.002" to 0.002" | __ | 50 | 0000000 | 00000 |
3/4" | -0.002" to 0.002" | __ | 25 | 0000000 | 0000 |
0.787" | -0.002" to 0.002" | __ | 10 | 0000000 | 0000 |
7/8" | -0.002" to 0.002" | __ | 1 | 0000000 | 0000 |
1" | -0.002" to 0.002" | __ | 10 | 0000000 | 0000 |
1.479" | -0.002" to 0.002" | __ | 3 | 0000000 | 0000 |
Hollow | |||||
1" | -0.015" to 0.015" | FDA Compliant 21 CFR 177.1520 | 25 | 0000000 | 0000 |
1.4" | -0.015" to 0.015" | FDA Compliant 21 CFR 177.1520 | 25 | 0000000 | 0000 |
Often used in check valves, relief valves, and float valves, these balls won’t swell when exposed to water. HDPE offers good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Offering a nonstick, slippery surface, these PTFE balls are often used as bearings and in ball valves. They offer superior chemical resistance and perform well in extreme temperatures. These balls are also excellent electrical insulators.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance | Tensile Strength | Pkg.Qty. | Pkg. | |
1/16" | -0.002" to 0.002" | 2,000-3,480 psi | 100 | 0000000 | 000000 |
3/32" | -0.002" to 0.002" | 2,000-3,480 psi | 100 | 0000000 | 00000 |
1/8" | -0.002" to 0.002" | 2,000-3,480 psi | 100 | 0000000 | 00000 |
5/32" | -0.002" to 0.002" | 2,000-3,480 psi | 100 | 0000000 | 00000 |
3/16" | -0.002" to 0.002" | 2,000-3,480 psi | 50 | 0000000 | 00000 |
1/4" | -0.002" to 0.002" | 2,000-3,480 psi | 50 | 0000000 | 00000 |
5/16" | -0.002" to 0.002" | 2,000-3,480 psi | 25 | 0000000 | 0000 |
3/8" | -0.002" to 0.002" | 2,000-3,480 psi | 20 | 0000000 | 0000 |
1/2" | -0.002" to 0.002" | 2,000-3,480 psi | 10 | 0000000 | 0000 |
5/8" | -0.002" to 0.002" | 2,000-3,480 psi | 5 | 0000000 | 0000 |
3/4" | -0.002" to 0.002" | 2,000-3,480 psi | 1 | 0000000 | 0000 |
1" | -0.002" to 0.002" | 2,000-3,480 psi | 1 | 0000000 | 0000 |
1 1/8" | -0.005" to 0.005" | 3,000-5,000 psi | 1 | 0000000 | 00000 |
1 1/4" | -0.005" to 0.005" | 2,000-3,480 psi | 1 | 0000000 | 00000 |
1 1/2" | -0.005" to 0.005" | 2,000-3,480 psi | 1 | 0000000 | 00000 |
1 5/8" | -0.005" to 0.005" | 3,000-5,000 psi | 1 | 0000000 | 00000 |
1 3/4" | -0.005" to 0.005" | 3,000-5,000 psi | 1 | 0000000 | 00000 |
1 7/8" | -0.005" to 0.005" | 3,000-5,000 psi | 1 | 0000000 | 000000 |
2" | -0.005" to 0.005" | 3,000-5,000 psi | 1 | 0000000 | 000000 |
2 1/4" | -0.005" to 0.005" | 3,000-5,000 psi | 1 | 0000000 | 000000 |
2 1/2" | -0.005" to 0.005" | 3,000-5,000 psi | 1 | 0000000 | 000000 |
3" | -0.005" to 0.005" | 3,000-5,000 psi | 1 | 0000000 | 000000 |
4" | -0.005" to 0.005" | 3,000-5,000 psi | 1 | 0000000 | 000000 |
Dimensionally stable and slippery, these balls are often used in high-friction applications, such as nonlubricated rollers and ball bearings.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance | Pkg. Qty. | Pkg. | |
Inch | ||||
---|---|---|---|---|
1/8" | -0.001" to 0.001" | 50 | 0000000 | 00000 |
3/16" | -0.001" to 0.001" | 25 | 0000000 | 0000 |
7/32" | -0.001" to 0.001" | 25 | 0000000 | 0000 |
1/4" | -0.001" to 0.001" | 25 | 0000000 | 0000 |
5/16" | -0.001" to 0.001" | 25 | 0000000 | 00000 |
3/8" | -0.001" to 0.001" | 15 | 0000000 | 00000 |
13/32" | -0.001" to 0.001" | 10 | 0000000 | 00000 |
1/2" | -0.001" to 0.001" | 10 | 0000000 | 00000 |
Metric | ||||
5mm | -0.0254mm to 0.0254mm | 10 | 0000000 | 0000 |
6mm | -0.0254mm to 0.0254mm | 10 | 0000000 | 0000 |
A lightweight alternative to glass balls, acrylic balls maintain clarity over time. They are scratch and UV resistant, so they stand up to outdoor use better than polycarbonate.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance | Pkg. Qty. | Pkg. | |
1/16" | -0.002" to 0.002" | 500 | 0000000 | 000000 |
1/8" | -0.002" to 0.002" | 250 | 0000000 | 00000 |
5/32" | -0.002" to 0.002" | 250 | 0000000 | 00000 |
3/16" | -0.002" to 0.002" | 100 | 0000000 | 0000 |
7/32" | -0.002" to 0.002" | 100 | 0000000 | 00000 |
1/4" | -0.002" to 0.002" | 100 | 0000000 | 0000 |
5/16" | -0.002" to 0.002" | 50 | 0000000 | 00000 |
3/8" | -0.002" to 0.002" | 50 | 0000000 | 00000 |
1/2" | -0.002" to 0.002" | 25 | 0000000 | 00000 |
5/8" | -0.002" to 0.002" | 25 | 0000000 | 00000 |
3/4" | -0.002" to 0.002" | 10 | 0000000 | 00000 |
1" | -0.002" to 0.002" | 5 | 0000000 | 00000 |
Offering excellent impact resistance across a wide temperature range, these polycarbonate balls are only half the weight of glass. This material is comparable to Lexan, Hyzod, Tuffak, and Makrolon.
For technical drawings and 3-D models, click on a part number.