With or Without Bearing With or Without Bearing |
---|
|
OD OD |
---|
Capacity Capacity |
---|
|
Application Application |
---|
|
Insertion Style Insertion Style |
---|
|
Pulley Diameter Pulley Diameter |
---|
|
|
|
Attachment Type Attachment Type |
---|
![]() | ![]() |
Shackle | Eye |
![]() | ![]() |
Carabiner | Latching Hook |
Housing Material Housing Material |
---|
|
Bearing Material Bearing Material |
---|
|
More
Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing. Ball bearings and needle-roller bearings allow for easier turns than sleeve bearings.
Acetal and nylon are lightweight and corrosion resistant.
For technical drawings and 3-D models, click on a part number.
For Rope Dia. | Capacity, lbs. | OD | Pulley Dia. | For Shaft Dia. | Wd. | Material | Each | ||
Without Bearing | |||||||||
---|---|---|---|---|---|---|---|---|---|
A | 1/32" | Not Rated | 3/8" | 5/16" | 1/8" | 1/8" | Acetal Plastic | 0000000 | 00000 |
A | 1/32" | Not Rated | 5/8" | 1/2" | 1/8" | 1/8" | Acetal Plastic | 0000000 | 0000 |
A | 3/64" | Not Rated | 3/4" | 5/8" | 1/8" | 3/16" | Acetal Plastic | 0000000 | 0000 |
A | 3/64" | Not Rated | 1" | 13/16" | 3/16" | 3/16" | Acetal Plastic | 0000000 | 0000 |
A | 3/64" | Not Rated | 1 1/16" | 7/8" | 3/16" | 1/4" | Acetal Plastic | 0000000 | 0000 |
A | 1/16" | Not Rated | 1 1/4" | 1 1/16" | 3/16" | 1/4" | Acetal Plastic | 0000000 | 0000 |
A | 1/8" | Not Rated | 1 3/4" | 1 3/8" | 1/4" | 5/16" | Acetal Plastic | 0000000 | 0000 |
A | 3/16" | Not Rated | 1 9/16" | 1 1/4" | 1/4" | 3/8" | Acetal Plastic | 0000000 | 0000 |
A | 1/4" | Not Rated | 1 15/16" | 1 9/16" | 5/16" | 7/16" | Acetal Plastic | 0000000 | 0000 |
C | 3/32" | 200 | 2 1/2" | 2 3/16" | 1/4" | 1/4" | Nylon Plastic | 0000000 | 0000 |
C | 3/16" | 800 | 3" | 2 1/2" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 0000 |
C | 3/16" | 800 | 3 1/2" | 3" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 0000 |
C | 1/4" | 1,400 | 4" | 3 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
C | 1/4" | 1,400 | 4 1/2" | 3 7/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
C | 1/4" | 1,400 | 5" | 4 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
D | 5/16" | 1,600 | 5 1/2" | 4 5/8" | 3/4" | 5/8" | Nylon Plastic | 0000000 | 00000 |
D | 5/16" | 1,600 | 6" | 5 1/4" | 3/4" | 5/8" | Nylon Plastic | 0000000 | 00000 |
With Ball Bearing | |||||||||
B | 1/32" | 10 | 5/8" | 1/2" | 1/8" | 1/8" | Nylon Plastic | 0000000 | 00000 |
B | 3/64" | 10 | 3/4" | 5/8" | 1/8" | 3/16" | Nylon Plastic | 0000000 | 00000 |
B | 3/64" | 90 | 1 1/16" | 7/8" | 3/16" | 1/4" | Nylon Plastic | 0000000 | 00000 |
B | 1/16" | 90 | 1 1/4" | 1 1/16" | 3/16" | 1/4" | Nylon Plastic | 0000000 | 00000 |
B | 3/32" | 90 | 1 1/2" | 1 1/4" | 1/4" | 5/16" | Nylon Plastic | 0000000 | 00000 |
B | 1/8" | 90 | 1 3/4" | 1 3/8" | 1/4" | 5/16" | Nylon Plastic | 0000000 | 00000 |
With Needle-Roller Bearing | |||||||||
C | 3/32" | 200 | 2 1/2" | 2 3/16" | 1/4" | 1/4" | Nylon Plastic | 0000000 | 00000 |
C | 3/16" | 800 | 2 1/2" | 2" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 00000 |
C | 3/16" | 800 | 3 1/2" | 3" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 00000 |
C | 1/4" | 1,400 | 4" | 3 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
C | 1/4" | 1,400 | 5" | 4 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
D | 5/16" | 1,600 | 6" | 5 1/4" | 3/4" | 5/8" | Nylon Plastic | 0000000 | 00000 |
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Nylon is lighter in weight than metal. Aluminum is corrosion resistant. Stainless steel is the most corrosion resistant.
Pulley with carabiner can mount to steel framing or hang as part of your rigging system.
For technical drawings and 3-D models, click on a part number.
For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Material | Housing Material | Each | ||
Single-Groove Without Bearing | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Swivel Eye | ||||||||||||
A | 1/4" | 150 | 1 3/8" | 9/16" | 1 3/8" | 2 13/16" | 3/8" | 3/16" | Nylon Plastic | Stainless Steel | 0000000 | 000000 |
Single-Groove With Bearing | ||||||||||||
Rigid Carabiner | ||||||||||||
C | 3/16" | 900 | 3 3/8" | 1 3/16" | 4" | 7 3/8" | 3/4" | 5/16" | Nylon Plastic | Aluminum | 0000000 | 000000 |
Also known as snatch blocks, these pulleys open so it’s easier to feed the rope through the housing—a free rope end is not needed. Use them to assist with horizontal pulling or to guide a rope.
Style D pulleys have a corrosion-resistant stainless steel housing.
For technical drawings and 3-D models, click on a part number.
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Acetal, nylon, and aluminum are lightweight and corrosion resistant. Styles C, H, and P have a bracket on the bottom for tying off one end of a rope.
Style J reduce the force needed to hold your load in place. Unlike standard pulleys, these have a V-groove for more grip on your rope, and they ratchet when under load so they won't slip in the other direction. Pulley for 3/8" dia. rope can be set to ratchet even when not under load.
For technical drawings and 3-D models, click on a part number.
Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Hook Opening Wd. | Hook Thick. | Material | Housing Material | Each | |
Single-Groove Without Bearing | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Rigid Eye | ||||||||||||||
E | 3/16" | 325 | 3/4" | 3/8" | 3/4" | 1 3/8" | 3/16" | 1/8" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 000000 |
E | 5/16" | 650 | 1 1/8" | 1/2" | 1 1/8" | 2" | 3/16" | 1/2" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 00000 |
Swivel Shackle | ||||||||||||||
F | 1/4" | 325 | 1" | 1/2" | 1" | 2 1/8" | 1/4" | 3/16" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 00000 |
G | 7/16" | 875 | 1 9/16" | 3/4" | 1 9/16" | 3 1/2" | 1/2" | 3/16" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 00000 |
G | 1/2" | 1,650 | 2" | 1" | 2" | 4" | 1/2" | 1/4" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 00000 |
H | 1/2" | 1,650 | 2" | 1" | 2" | 5" | 1/2" | 1/4" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 00000 |
J | 5/16" | 375 | 1 9/16" | 13/16" | 1 9/16" | 3 1/8" | 3/8" | 3/16" | __ | __ | Aluminum | Nylon Plastic | 0000000 | 00000 |
J | 3/8" | 550 | 2 3/16" | 15/16" | 2 3/16" | 3 7/8" | 3/8" | 3/16" | __ | __ | Aluminum | Nylon Plastic | 0000000 | 00000 |
Double-Groove Without Bearing | ||||||||||||||
Swivel Latching Hook | ||||||||||||||
P | 1/2" | 1,000 | 2" | 2 3/8" | 2" | 11 1/4" | __ | __ | 7/8" | 9/16" | Nylon Plastic | Nylon Plastic | 000000 | 000000 |
Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Aluminum and nylon are lightweight and corrosion resistant. Stainless steel has the most corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Material | Housing Material | No. of | Dia. | Ctr.-to-Ctr. (A) | Each | ||
Without Bearing | |||||||||||||
8 | 1/2" | 1,750 | 2" | 7/8" | 2 3/4" | 2 1/2" | Nylon Plastic | Stainless Steel | 2 | 1/4" | 2 3/16" | 0000000 | 000000 |
With Bearing | |||||||||||||
7 | 3/8" | 1,100 | 2 3/16" | 15/16" | 3 1/8" | 2 13/16" | Nylon Plastic | Nylon Plastic | 2 | 1/4" | 2 3/16" | 0000000 | 00000 |
Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Acetal and aluminum are lightweight and corrosion resistant.
For technical drawings and 3-D models, click on a part number.
Customize the groove and bore to fit your application. The center of the pulley has a pilot hole so you can drill a bore to match a specific shaft size. Nylon is easy to machine yet resists impact and corrosion.
Use the bore to mount these pulleys on a shaft. These pulleys are also known as sheaves.
Nylon pulleys are lighter in weight than steel pulleys.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Also known as groove gauges, these measure the groove of your pulley to check for wear as well as determine the correct wire rope size.
Includes | Each | |
14 Gauges in 1/4" to 1 1/2" Wire Rope Diameters | 0000000 | 000000 |