Configure these general purpose work platforms to fit your application.

Install these standard work platforms for easy access to elevated areas.

Platforms are covered with a vinyl foam mat to provide comfort and reduce fatigue.

Folding legs and a carrying handle make these lightweight platforms easy to take anywhere.

These platforms are nonconductive fiberglass.

Transform your forklift into an elevated work platform.

Move these standard rolling platform ladders easily between your work areas.

Aluminum is lighter than steel and stainless steel, making these ladders easier to roll between work areas.

Tilt these general purpose platform ladders to roll them on their wheels.

Made entirely of 304 stainless steel, these ladders are more corrosion resistant than aluminum.

While in use, wheels retract and the cup shoes rest directly on the floor to prevent movement.

Extra bracing in the base and back makes these ladders tough enough to handle harsh environments.

An extra pair of casters in the center allows these ladders to turn easily in narrow aisles and tight spaces.

Not only can you climb on either side of these ladders, two people can use the oversized platform simultaneously.

Get close to your work even when pipes or other objects are in the way. With no horizontal braces, these ladders can straddle obstructions.

Release the chain across the back of this platform so you can walk through to unload and load trailers.

These scaffolds provide the space and height to complete elevated projects that most work platforms can't reach.

Even if your surface isn't level, your scaffold can be—the end frames on these scaffolds adjust independently so you can set each side at a different height.

These steel scaffolds provide the space and height to complete elevated projects that most work platforms can't reach.

Aluminum is a good choice for damp areas and outdoor use.

Grip the handrail for stability. With spring-loaded casters, these step stools are easy to move between work areas.

Use these standard crossover bridges to walk over conveyors, machines, and pipes.

Set at a steeper angle than our other crossover bridges, these bridges require less floor space.

These ladders have a large platform and a waist-high guardrail, making them safer and more comfortable than standard ladder rungs for prolonged standing and reaching.

Compatible with most Werner platform step ladders, these gates fully enclose the platform, enabling you to safely work with both hands while facing any direction.

Able to support heavier loads than plank grating, bar grating is good for trenches, mezzanines, walkways, work platforms, and floors.

Secure grating to your support structure.

Narrow openings prevent items from falling through this grating and make it easier for carts to roll across.

Secure grating to your support structure.

An integral toeboard keeps tools and parts from falling off this plank grating and meets OSHA 29 CFR 1910.23 for elevated walkways.

The most economical stair treads we offer.

These lightweight fiberglass treads are corrosion resistant, nonconductive, and nonmagnetic.

This nosing has an integral anchor for installation in fresh concrete stairs; no additional fasteners required.

Openings in the surface allow dust, dirt, and liquids to pass through.

This solid fiberglass grating is good for wheel traffic and areas where you don't want small items and debris to fall through.

Use this two-part, solvent-free epoxy to install floor tiles.

For the most demanding applications, these trucks carry loads of 1,200 lbs. or more.

The aluminum platform on these trucks weighs less than many steel and wood platforms but is still strong.

For added strength, the platform on these trucks is reinforced with steel to handle loads of 1,000 lbs. or more.

Wood platforms are quieter, and grip loads and absorb impact better than trucks with a metal platform.

Tall handles let you stack higher than other trucks, and a narrow platform with rigid casters in the center and swivel casters at each end let you maneuver in tight spaces. Remove the handles for easy unloading.

These trucks have a drive system to move heavy materials without physical stress.

The platform on these dollies is open in front to make loading and unloading easier.

Also known as A/V and audio/visual carts, these carts come with an outlet strip and power cord.

Platforms support material directly without an additional pallet. Crank a handle or pump a foot pedal to raise and lower loads.

Adjust the width of the forks to fit most pallets. A hydraulic pump powered by a rechargeable battery raises and lowers the load with the push of a button.

The platforms on these dollies are oversized to handle pallets, machinery, large containers, and other heavy equipment.

These wagons provide a smooth and gentle ride for transporting fragile loads. They are quieter and absorb impact better than steel wagons.

Use the rear hitch on these trailers to pull up to five trailers at the same time. The wheel axle pivots for easy maneuvering.

Move loads around your facility, then use the hydraulic pump to lift them to a comfortable working height.

Ball-and-socket connections allow 360° positioning.

Stronger and with greater load capacities than gooseneck-style positioning arms, these arms keep their shape even when moving or when exposed to vibration. They’re often used in robotics and conveyor applications when frequent repositioning isn’t required.

Bend these arms to hold small equipment such as lights and microphones in almost any position.

Position small panels and displays with these compact arms.

Attach and position phones, tablets, monitors, and other displays on T-slotted rails.

Mix and match a variety of components to create a custom workstation for moving parts in and out of CNC machines or other similar applications.

These tables have a foot lever and hydraulic pump to raise loads and either a hand valve or hand lever for controlled lowering.

For easy access to material, the tabletop rotates 360° and locks in any position.

A battery-operated motor and a hydraulic pump do the work for you; they lift loads with the push of a button.

The hand crank on these tables has two speeds for fast and slow adjustment.

These tables are compact, yet provide the lifting capacity of standard lift tables.

The tabletop can go as low as 3", making loading and unloading from the floor and pallets easier.

These tables have a foot lever and hydraulic pump to raise the load.

Choose your table based on capacity, then choose the type of control that best suit your application.

An air cylinder automatically returns the stand to your set height as you add or remove parts of the load.

These jacks are often used to position small shop and laboratory equipment.

Mount components of Ball-Grip Positioning Arms to the top of a positioning stand or tripod.

Bend and wrap the legs around almost anything while keeping a level mounting surface.

Place these turntables on a bench top to raise an object above the surface for better access to all sides while working.

Often used in displays, these turntables have a motor for continuous rotation.

Attach a monitor to these stands, then route cords through the hollow mounting poles for a clean, organized appearance.

Position parts exactly where they’re needed for workers, robots, and other machines to easily access them.

Rotate work 360° and precisely position it on X- and Y-axes by turning the handles.

Lighter than steel, these aluminum dock plates have two handles for quick manual positioning.

Telescoping handles with wheels let one person lift and position these dock plates without using a forklift.