Mount these workstations on a flat vertical surface to create a steady horizontal surface for writing, typing, or tinkering. They work as a case when closed, with a 2 3/4"-deep interior for carrying a laptop, small tools, and other supplies. When you need a workstation, mount them to a metal surface such as an electrical cabinet with the included magnets, or a nonmetal surface such as a wall with the included suction cups. The magnets and suction cups screw into either exterior side of workstations; leave magnets on one side and suction cups on the other to be ready for quick use. On the interior, workstations have a movable rubber work surface, magnetic strips across the top for holding tools, and wire rope cables to keep workstations open at a 90° angle.

These durable tables won't warp or splinter. Use them as a work surface for machines and equipment. They can be configured at a custom height. Adjust height in 3" increments by removing and repositioning the leg bolts.

Tables that adjust 22"-28" high position work at a comfortable height when seated. Tables that adjust 34"-40" high are the same height as most workbenches, making them a comfortable height for most standing tasks.

Support 3,000 to 5,000 lbs. with these welded tables. The durable steel top won’t warp or splinter. Use these tables as a work surface for machines and equipment. They can be configured for either seated or standing tasks. Adjust height in 2" increments by removing and repositioning the leg bolts.

Tables with shelf have a fixed lower shelf that always remains the same distance from the tabletop regardless of table height.

Equipped with casters, move mobile tables around your space. They have a 1 1/2" lip on three sides to prevent items from sliding off.

Without a shelf, these tables provide room to pull up a stool or chair. The durable steel top won’t warp or splinter. Use these tables as a work surface for machines and equipment.

30" high tables are standard table height. 34" and 36" high tables are the same height as most workbenches, making them a comfortable height for most standing tasks. 42" high tables raise work to a comfortable standing height for typing and other tasks that require work close to eye level.

Style A have a reversible top, allowing you to use the work surface either with or without a 2" high lip around the edge.

Style C have 5" diameter wheels to easily roll over cracks, extension cords, drains, and other obstacles.

Style D have a drawer with a keyed lock.

Without a shelf, these tables provide room to pull up a stool or chair. They withstand chemicals, grease, and repeated washdowns for use in laboratories and food-processing areas. All meet NSF/ANSI standards.

Use these tables as a work surface for machines and equipment. They are the same height as most workbenches, making them a comfortable height for most standing tasks.

Tables with backstop prevent items from sliding off.

Turn the crank to adjust the height of these tables without clearing off the top or loosening leg bolts. They can be configured for either seated or standing tasks. The crank allows for fine adjustments to the table height. With an extra-smooth surface, these tables won't trap dirt and oil, making them easy to clean. They are also nonconductive.