Filter by
Color
Clarity
System of Measurement
For Minimum Nozzle Opening Diameter
Weight
Container Type
Spool Material
Tensile Strength
Performance
Density
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Flexural Modulus
Hardness Rating
REACH
RoHS
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
Manufacturer Model Number
Maximum Temperature
Dremel 3D Printer Filaments
 |
Build parts and prototypes from these filaments using Dremel fused filament fabrication (FFF) 3D printers. An RFID tag on the spool communicates with your printer, automatically adjusting it to the correct temperature and print speed for the filament material and notifying you when the filament is running out.
Maximum exposure temperature is the point at which a printed part will begin to deform. Above this temperature, your printed parts will start to lose structural integrity.
PLA
 |
Blue |
PLA filaments are the most commonly used in 3D printing. PLA is easy to use; it rarely clogs nozzles, doesn’t require a heated printer bed, and prints at a low temperature—meaning parts won’t warp while cooling. It produces string-free parts, so you can use it to print with a high level of detail. Less durable and more sensitive to heat than ECO-ABS, PLA is better for printing prototypes than end-use parts.
Tensile Strength—Tensile strength is the best measure of a filament's overall strength. Similar to the stress applied on a rope during a game of tug-of-war, it's the amount of pulling force a material can handle before breaking. A higher rating means a stronger filament. A tensile strength of 5,000 psi and above is considered good; 12,000 psi and above is excellent.
Spool, mm | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia., mm | Printing Temp. | For Printer Bed Temp. | Tensile Strength, psi | Max. Exposure Temp. | For Min. Nozzle Opening Dia., mm | Dia. | Dp. | Wt., g | Color | Each | ||
| 1.75 | 200° to 230° C 395° to 445° F | 35° C 95° F | 6,620 | 60° C 140° F | 0.25 | 180 | 55 | 750 | Blue | 3653N4 | 000000 | |
