We will reply to your message within an hour.
More
An SMC filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Festo filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Parker filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.
With one outlet port before the lubricator and one after, these filter/regulator/lubricators work in systems that require lubrication in some lines but not in others.
No need for thread adapters—these filter/regulator/lubricators have an NPT inlet and a BSPP outlet.
Three components are combined in the same space as a filter alone. These units provide clean, lubricated compressed air at your required pressure.
A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.
With ±0.2 psi accuracy, these filter/regulators provide more precise control than our other compressed air filter/regulators.
Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.
A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.
No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.
Mount these filter/regulators to a 35 mm DIN rail with the included brackets.
A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.
Use a single air supply to distribute air to up to four locations. In addition to the outlet for inline connection, these manifolds have three 1/4 NPT female outlets for connection to air-powered tools and equipment.
Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.
An oil filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.
Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.
Replace the filter element in your SMC modular compressed air filter to trap solid particles and water droplets as small as 5 microns.