We will reply to your message within an hour.
More
A special fastener on the back of these discs allows you to easily swap one disc for another.
The premium abrasive stays sharp longer.
The heavy duty construction provides more support than standard discs for heavy material removal.
The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.
Debur, clean, and blend faster than other nylon mesh discs.
The abrasive-embedded nylon mesh construction gives you more control over sanding pressure.
Thicker, more pliable, and less aggressive than standard nylon mesh quick-change discs, use these for finer sanding on curved surfaces.
Used for heavy cleaning and stripping, these discs have an abrasive-embedded nylon mesh construction that gives you more control over sanding pressure.
Press onto a compatible sanding tool or backup pad; peel off to remove.
A coating prevents dust and debris from building up on the abrasive surface.
Holes allow dust removal when used with a vacuum sander.
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.
The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.
The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.
The thick, abrasive-embedded nylon mesh construction gives you maximum control over sanding pressure.
Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.
Fit these discs over your tool's arbor.
Holes in the disc let you see the surface you’re sanding.
The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.
Fit these discs over your tool’s arbor to sand stainless steel and hard metals.
The premium abrasive stays sharp longer. Holes in the disc let you see the surface you’re sanding.
Secure the shank into the collet or chuck of your tool.
With more flaps than standard discs, these last 30-40% longer.
Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.
These discs have a harder abrasive than standard flap sanding discs.
The abrasive-embedded mesh construction gives you more control over sanding pressure, creating more consistent finishes.
The flaps alternate between an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.
Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.
The backing plate on these discs can be sheared away as the abrasive flaps wear down, allowing you to use more of the disc rather than replacing with a new one.
The flaps wrap around the outer edge of these discs to sand welds at right angles.
Set at an angle and widely spaced, the flaps reach into corners.
The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.
Use these discs with commercial floor buffing machines to sand wood floors.