We will reply to your message within an hour.
More
Illuminate outdoor areas and objects such as parking lots, flag poles, and billboards.
These lights are UL listed for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.
Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.
Mount these lights near entry doors, loading areas, and driveways to cast an even glow of light.
Heads adjust to any angle so you can direct light where needed.
Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces.
These lights automatically turn on when movement is detected and off when an area is unoccupied.
Also known as wall packs, these lights mount to exterior walls and ceilings.
No need for wiring—these lights plug-in with a three-prong plug.
Hardwire these lights to a power source.
Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.
These lights produce a wide beam of uniform light to fill large, open areas with ceilings up to 18-ft. high.
Update standard outlet boxes in closets, hallways, and storage rooms to use LED light.
Also known as troffers, these lights fit most standard drop-ceiling grids.
These lights fit into ceiling cutouts.
Also known as turret lights, these fixtures have downlight reflectors to direct light.
Fit traditional fluorescent ceiling strip lights with these LED lights, which use energy more efficiently, last longer, and produce less heat.
Also known as pendant lights, these fixtures hang from a cord.
Also known as strip or channel lights, the ends of these fixtures are designed to be wired together to create long rows of lights.
Don’t waste energy lighting unoccupied spaces--these lights turn on when they detect movement. Set them to turn off after 30 or 180 seconds.
Mount these fixtures where you need light but don't have an electrical connection. They automatically turn on when movement is detected and off when an area is unoccupied.
No need for wiring—these lights plug-in with a two-prong plug. Also known as shop lights.
A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.
With a lower profile than other bay lights, linear bay lights mount closer to ceilings, providing more room for racks or shelving.
Use these lights in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 30-ft. high.
These lights mount to the wall so they're often used in enclosed spaces such as stairwells, hallways, and storage rooms.
A sealed lens keeps moisture out to protect these lights against washdowns.
Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs.
These IP67 rated lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes. They're compact for easy transport to job sites with no electrical power.
The handle on this floodlight also acts as a stand—pivot it 360° to aim light where it's needed. This floodlight is small and easy to carry to job sites that don't have electrical power.
Compact and easy to carry, these IP65-rated lights stand up to dust and low-pressure jets of water. The head adjusts up and down as well as side to side to direct light where it's needed.
Rated IP65, these lights are sealed to protect against light washdowns from a garden hose. They have a height-adjustable stand and light heads that pivot up and down to direct light where it's needed.
These floodlights have heads that swivel and rotate for perfect positioning in hard-to-light areas.
Hang these lights where you need them on the job site.
A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site.
Keep excess cord out of the way—the reel locks the cord at any length and retracts it when not in use.
A series of bulb heads are attached to a power cord to provide overhead lighting for job sites.
A movable head lets you aim light where it’s needed most in areas that don't have electrical power service.
Bring light to areas that don't have electrical power service.
Use sun energy to bring light to remote areas and storage spaces without electrical wiring. These lights come with a solar panel to recharge their battery.
Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their heads pivot to aim light where it's needed in areas that don't have electrical power service.
Use these with portable lights that use screw-in bulbs.
These lights are rated for environments where hazardous material is present.
With a NEMA 4X rating, these lights resist degradation when exposed to corrosive liquids, withstand liquids sprayed during washdowns, and are dust tight.
Because these lights have a reflector, they distribute light more evenly than other portable lights.
Provide 360° of lighting.
With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board.
These classic-style machine lights have a reflector to distribute light more evenly than strip machine lights.
Just like traditional tubular lights that illuminate your machine with a bright white light, these lights can also be programmed to switch over to a red or green light for communicating machine status.
Update conventional fluorescent tubular lights with newer LED technology. These lights are furnished with brackets that have the same hole pattern as most older lights for easy changeover.
Mount these lights into a recessed opening on your machine—they sit flush against the surface for a streamlined appearance.
Similar in function to tubular machine lights, except strip machine lights have a flat lens that directs light downward.
Suspend these lights overhead or mount them above your workspace.
These low-profile lights stay out of sight when mounted under a cabinet. Use them to free up space on your work surface.
Compared to other dock lights that can only adjust vertically and horizontally, these lights bend at any angle to direct light exactly where it's needed.
A sealed head and switch keeps these lights shining in wet environments. They swing out from the wall and adjust horizontally and vertically to illuminate loading dock and trailers.
These lights swing out from the wall to illuminate loading docks and trailers.
These lights are sealed to withstand shallow water, such as ponds and fountains.
Gooseneck arms can be repositioned faster and more easily than articulating arms.
Pivot the head to cast a narrow beam of light to exactly where it's needed.
These lights have a longer reach and hold their position better than gooseneck-arm lights, especially around vibration.
The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration.
Shine light on machinery and through the sight glass on tanks to inspect food, brewery, chemical, pharmaceutical, and bio-tech processing lines.
Though not as bright as our miniature fiber-optic lights, these lights have built-in LEDs that last longer, are more efficient, and are more affordable.
Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting.
These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights.
These lights cast a narrow beam of light. With a gooseneck arm, they are faster and easier to reposition than articulating-arm lights.
Communicate a status at a glance by wiring these strip lights to change color when a part is malfunctioning inside your enclosure.
A motion sensor turns on these lights when an enclosure door is opened. Mount them inside cabinets, closets, and other enclosed spaces.
Illuminate your electronics cabinets and racks with long-lasting LED lights.
Rated for use in damp locations, these lights withstand humidity and moisture.
Mount add-on heads in remote areas to extend emergency lighting.
These lights are sealed to protect against humidity, moisture, and dripping and splashing liquids.
Rated NEMA 4X, these lights are protected from corrosion and washdowns.
Attach these lights in one of the quick-clamp ports for a clear view of what's inside tanks, filters, and other closed containers used in brewery, pharmaceutical, and food-processing lines.
Illuminate outdoor flags without connecting to an electric power source. These lights have a built-in solar panel that gathers energy from the sun throughout the day to power them at night.
Illuminate workstations, enclosures, and machines.
Illuminate the interior of your high-vacuum chamber to clearly observe what’s inside.