About Shafts
More
About Casters and Wheels
More
Threaded Rotary Shafts
Threaded End × Straight End
Attach threaded accessories, such as mixer propellers and fan blades, to the end of these shafts. The edges are chamfered to remove sharp corners, reducing damage to bearings, housings, and other components during installation. All are turned, ground, and polished to tight diameter and straightness tolerances. Made of carbon steel, these shafts balance high strength and good machinability, making them ideal for general purpose use.
For technical drawings and 3-D models, click on a part number.
Threaded End | |||||||||
---|---|---|---|---|---|---|---|---|---|
Lg. | Lg. Tolerance | Size | Lg. | Straightness Tolerance | Edge Type | Hardness Rating | Hardness | Each | |
Inch—1117 Carbon Steel | |||||||||
3/4" Dia. (Tolerance: -0.0004" to 0") | |||||||||
6" | -0.125" to 0.125" | 3/4"-10 | 1 1/2" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 000000 |
12" | -0.125" to 0.125" | 3/4"-10 | 1 1/2" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
24" | -0.125" to 0.125" | 3/4"-10 | 1 1/2" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
Wheel Axles
Axle
Axle with Grease Fitting
Replace worn or broken caster axles.
For technical drawings and 3-D models, click on a part number.
Dia. | Lg. | Thread Size | Thread Lg. | Includes | Each | |
Axle | ||||||
---|---|---|---|---|---|---|
Zinc-Plated Steel | ||||||
3/4" | 4" | 3/4"-10 | 1 3/4" | Hex Nut | 00000000 | 000000 |
3/4" | 4 1/2" | 3/4"-10 | 1 3/4" | Hex Nut | 0000000 | 00000 |
3/4" | 5" | 3/4"-10 | 2" | Hex Nut | 00000000 | 00000 |
Axle with Grease Fitting | ||||||
Zinc-Plated Steel | ||||||
3/4" | 4 1/4" | 3/4"-10 | 3/4" | Hex Nut | 00000000 | 00000 |
3/4" | 4 3/4" | 3/4"-10 | 11/16" | Hex Nut | 00000000 | 00000 |