With a diameter that’s held to a close tolerance, this material is hardened for increased wear and abrasion resistance.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. These balls are often used in bearings.

Also known as mild steel, use these low-carbon steel balls in parts that don't require high strength.

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

Widely used as bearings and in valves, 2017 aluminum is a durable, lightweight material.

This S2 tool steel has been hardened for excellent strength and impact resistance. It has a tough core that resists breaking under shock loads.

Fill forming bags for shaping metal or use as a counterweight.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Among the strongest plastic materials we offer, Torlon PAI has a slippery surface that resists wear. Use it to make high-friction compressor parts, bearings, and seals.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

A rubber coating provides a comfortable grip. Good for control levers and push-pull rods, these easy-to-grip ball knobs install on a threaded stud.

Expose these easy-to-grip ball knobs to light and they will glow green in the dark. Use them on control levers, push-pull rods, and emergency release handles. They mount on a threaded stud.

FDA compliant for direct contact with food, these balls are often used to clean screens in vibrating sifters in food, beverage, and other sanitary environments. You can also use them as seals in pumps and check valves.

Use these balls as seals in pumps and check valves or let them bounce inside of vibrating sifters for an effective screen cleaner.

Loosen fine particles from the grip of vibrating-sifter screens with the bounce of rubber balls. Also use them as seals in pumps and check valves. They’re made from FDA-listed materials for use with food and beverage.

Clean screens in vibrating sifters with the bounce of these balls, or use them as seals in pumps and check valves.

Often used to create bearings, silicon-nitride ceramic is harder than many types of bearing steel but is lightweight and can be easily polished. It also withstands high temperatures.

Extremely hard with excellent corrosion resistance, this silicon-carbide ceramic is often used for rubbing parts such as bearings and bushings in chemicalprocessing environments.

Install tooling balls in a workpiece or fixture to create a precise measurement reference point. Push the shank further into the hole to adjust the height of the ball.

Use a mounting pad when your tooling ball needs a raised mounting point.

Commonly used in molding applications such as injection molding and extrusion, these foaming agents reduce weight, warpage, and sinks in finished parts.

These pellets resist swelling when exposed to water, making them suitable for use in wet environments. Melt and mold them into desired shapes.

Often used as the final step after other media, this type of media is also good for use on fragile parts and won't contaminate nonferrous materials.

Ball transfers have a double-sealed ball to keep out dirt and debris. Side vents expel contaminants.

These ball transfers have capacities up to 2,200 lbs.

Ball transfers have a double-sealed ball to keep out dirt and debris. Side vents expel contaminants.

A thick rubber cushion underneath these ball transfers absorbs impact and reduces vibration.

These ball transfers have capacities up to 2,200 lbs.

Transfers recess into the mounting surface for a low profile.

Ball transfers have a double-sealed ball to keep out dirt and debris. Side vents expel contaminants.

These ball transfers and stops rise when you supply air and retract into the housing when air supply ceases.

These plates are designed to rest on a flat surface and are good for rotating and positioning heavy workpieces.

These floats are untethered by a float rod so they can float freely in your tank.

Made of polyethylene, these floats can be used with chemicals, salts, and caustic fluids.

Add these tiny glass spacers to structural and instant-bond adhesives to keep adhesive from squeezing out during clamping.

For an easy towing connection, mount these hooks to a bumper or trailer.

Use these inserts in hitch-ball connections.

Mount these receivers to your vehicle. Use them with an insert and pin for a complete hitch.

These pins secure inserts to a receiver.

A shield on the swivel keeps out contaminants for extended service life.

Our most popular casters for carts and dollies.

Forged steel construction gives these casters the strength for demanding applications.

Made from a special blend of rubber, the wheels on these casters roll easily over smooth and rough surfaces.

A tough, puncture-resistant tread surrounds a nonpressurized pocket of air so these wheels absorb shock to cushion like pneumatic wheels but won't go flat.

Chrome or zinc plating gives these casters a bright, clean finish.

The steel frame has a black powder-coated finish to blend in with your equipment.

Both the wheel bearings and the swivel bearings are protected to lengthen the life of these casters.

The solid rubber wheels on these casters cushion as well as pneumatic wheels but won't go flat.

With a 304 stainless steel frame for good corrosion resistance, these casters are an economical alternative to washdown casters. Wheels range from soft rubber that absorbs shock and sound while providing good traction on rough surfaces, to hard, impact-resistant rubber that rolls easily on smooth surfaces.

Choose these casters when you need high capacities and low mounting heights.

These highly maneuverable casters let you start rolling quickly and turn easily.

These highly maneuverable casters let you start rolling quickly and turn easily.

The springs in these casters take on bumpy surfaces and obstructions while preventing shock to the load.

The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor. The 303 stainless steel wheels are suitable for steam-cleaning applications.

Swivel casters have a kingpinless raceway with ball bearings for good impact resistance, smooth swiveling, and extended service life.

Not only do these casters offer some of the highest capacities, they also withstand the stress of sudden impact.

Pair these swivel casters that have a kingpinless raceway with ball bearings for good impact resistance, smooth swiveling, and extended service life, with the rigid casters to fit your needs.

Polyurethane wheels combine the abrasion resistance of plastic with the shock- and sound-absorbing qualities of rubber. They have a stainless steel frame and sealed bearings for corrosion resistance.

Use these general purpose casters in a variety of applications.

A nylon frame gives these casters the corrosion resistance you need for equipment that’s frequently washed down. Their soft rubber wheels are shock absorbing and provide good traction on rough surfaces.

Press-fit these casters into sockets on Rubbermaid carts with a 7/16" Tube OD.

Easily replace casters on InterMetro carts and shelving—friction holds them in place in the 1" OD posts.