Locking Sleeve Bearing Carriages And Guide Rails

Filter by

Rail Width

Carriage Width

Carriage Length

Bearing Type

Plain Bearing Type

Carriage Material

Static Roll Moment Load Capacity

Mounting Hole Thread Size

Static Load Capacity

Lubrication

Overall Height

Overall Width

Static Pitch Moment Load Capacity

Bearing Material

RoHS Compliance

Rail Alignment Style

Maximum Temperature

Handle Diameter

Handle Material

REACH Compliance

Mounting Hole Depth

Mounting Hole Thread Pitch

Static Yaw Moment Load Capacity

Forward

How can we improve?

12 Products

About Moment Loads

Carriage

Guide Rail

A handle on the side of the carriage locks the carriage in place. With fewer moving parts and no need for lubrication, sleeve bearing carriages perform better in dusty and wet environments than ball and roller bearing carriages. They're also better at handling impact and vibration.

Note: Load capacity is diminished when carriages are mounted upside down or on a vertical surface.

For technical drawings and 3-D models, click on a part number.

Aluminum Carriages and PTFE Plastic Bearings
								Mounting							Anodized Aluminum Guide Rails
For Rail Wd., mm	Static Load Cap., lbs.	O'all Wd., mm	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Handle Dia., mm	Max. Temp., °F	No. of Holes	Hole Thread Size	Hole Thread Pitch, mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
15	900	63	24	47	68	20	190°	4	M5	0.8	16	No	000000	000000	250; 500; 1,000; 1,500; 2,000	0000000	00000
20	1,650	80	30	63	81	28	190°	4	M6	1	19.8	No	000000	00000	250; 500; 1,000; 1,500; 2,000	0000000	000
23	2,200	86	36	70	90	28	190°	4	M8	1.25	24.8	No	000000	00000	250; 500; 1,000; 1,500; 2,000	0000000	000
30	3,100	110	42	90	103	28	190°	4	M10	1.5	27	No	000000	000000	250; 500; 1,000; 1,500; 2,000	0000000	000

Self-Aligning Locking Sleeve Bearing Carriages and Guide Rails

Create a self-aligning system that can be locked in place with these carriages and guide rails. The floating bearing in these self-aligning carriages compensates for misalignment, so carriages will still move in tandem even if the rails aren’t installed at the same exact height. A complete system includes a self-aligning carriage and rail on one side and a fixed-alignment carriage and rail on the other (all sold separately).

Note: Each carriage can only be used with its corresponding guide rail. Load capacity is diminished when carriages are mounted upside down or on a vertical surface.

For technical drawings and 3-D models, click on a part number.

Self-Aligning Carriages and Guide Rails

Carriage

Guide Rail

Aluminum Carriages and PTFE Plastic Bearings
								Mounting							Anodized Aluminum Guide Rails
For Rail Wd., mm	Static Load Cap., lbs.	Axial Misalignment Capability, mm	O'all Wd., mm	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F	No. of Holes	Hole Thread Size	Hole Thread Pitch, mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
15	900	1	63	24	47	68	190°	4	M5	0.8	16	No	0000000	0000000	250; 500; 1,000; 1,500; 2,000	0000000	00000
20	1,650	1	80	30	63	81	190°	4	M6	1	19.8	No	0000000	000000	250; 500; 1,000; 1,500; 2,000	0000000	000
23	2,200	1	86	36	70	90	190°	4	M8	1.25	24.8	No	0000000	000000	250; 500; 1,000; 1,500; 2,000	0000000	000
30	3,100	1	110	42	90	103	190°	4	M10	1.5	27	No	0000000	000000	250; 500; 1,000; 1,500; 2,000	0000000	000

Fixed-Alignment Carriages and Guide Rails

Carriage

Guide Rail

Aluminum Carriages and PTFE Plastic Bearings
							Mounting							Anodized Aluminum Guide Rails
For Rail Wd., mm	Static Load Cap., lbs.	O'all Wd., mm	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F	No. of Holes	Hole Thread Size	Hole Thread Pitch, mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
15	900	63	24	47	68	190°	4	M5	0.8	16	No	000000	000000	250; 500; 1,000; 1,500; 2,000	0000000	00000
20	1,650	80	30	63	81	190°	4	M6	1	19.8	No	000000	00000	250; 500; 1,000; 1,500; 2,000	0000000	000
23	2,200	86	36	70	90	190°	4	M8	1.25	24.8	No	000000	00000	250; 500; 1,000; 1,500; 2,000	0000000	000
30	3,100	110	42	90	103	190°	4	M10	1.5	27	No	000000	000000	250; 500; 1,000; 1,500; 2,000	0000000	000