Filter by
About Moment Loads
More
Low-Profile Sleeve Bearing Carriages and Guide Rails
Style A Carriage
Style B Carriage
Style C Carriage
Style A Carriage
Style B Carriage
Style C Carriage
Guide Rail for Style A Carriage
Guide Rail for Style B Carriage
Guide Rail for Style C Carriage
For applications with low clearance, these carriages protrude less than 5 mm above their rails. Use them for light to moderate loads, as well as frequent starting and stopping applications where tight tolerances are not required. Sleeve bearings allow them to outperform ball bearings in wet, dirty, and high-vibration environments. Mount in any orientation without affecting load capacity.
For technical drawings and 3-D models, click on a part number.
Brass Carriages and PTFE Plastic Bearings | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | Anodized Aluminum Guide Rails | |||||||||||||||
For Rail Wd., mm | Static Load Cap., lbs. | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Max. Temp., °F | No. of Holes | Hole Thread Size | Hole Thread Pitch, mm | Hole Dp., mm | Fasteners Included | Each | Rail Lengths, mm | Per mm | |||
A | 17 | 10 | 8 | 15 | 20 | 190° | 2 | M3 | 0.5 | 5 | No | 000000 | 00000 | 000000 | 00000 |
Zinc Carriages and PTFE Plastic Bearings | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | Anodized Aluminum Guide Rails | ||||||||||||||||
For Rail Wd., mm | Static Load Cap., lbs. | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Max. Temp., °F | No. of Holes | Hole Dia., mm | Hole Thread Size | Hole Thread Pitch, mm | Hole Dp., mm | Fasteners Included | Each | Rail Lengths, mm | Per mm | |||
A | 40 | 150 | 14.5 | 34 | 50 | 190° | 2 | __ | M4 | 0.7 | 8 | No | 0000000 | 000000 | 000000 | 00000 | |
B | 27 | 110 | 10 | 24 | 40 | 190° | 2 | 4.5 | __ | __ | 5 | No | 0000000 | 0000 | 000000 | 000 | |
C | 80 | 220 | 12 | 72 | 80 | 190° | 4 | __ | M4 | 0.7 | 7 | No | 0000000 | 00000 | 000000 | 000 |