110 lbs. @ 120 rpm Dynamic Radial Load Capacity Bearings

Filter by

System of Measurement

Shaft Diameter

Plain Bearing Type

Length

Material

For Housing ID

Bearing Type

DFARS Compliance

Dynamic Radial Load Capacity @ Speed

For Load Direction

Lubrication

Maximum Temperature

Minimum Temperature

REACH Compliance

Shaft Mount Type

Shaft Type

RoHS Compliance

Lubricant

Lubrication Method

Dynamic Thrust Load Capacity @ Speed

Flange OD

Forward

How can we improve?

21 Products

About Plain Bearings

Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings

For 6 mm Shaft Dia.
For Housing ID, mm	Lg., mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
9	6	110 lbs. @ 120 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
10	6	110 lbs. @ 120 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000
12	6	110 lbs. @ 120 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000

Ultra-Low-Friction Oil-Embedded Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings

For 6mm Shaft Dia.
For Housing ID, mm	Lg., mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
9	6	110 lbs. @ 120 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	00000
10	6	110 lbs. @ 120 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	0000

Food Industry Oil-Embedded Sleeve Bearings

The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings

For 6mm Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
9mm	6mm	110 lbs. @ 120 rpm	Lubricated	SAE 20 Oil	-75° to 300°	00000000	00000
10mm	6mm	110 lbs. @ 120 rpm	Lubricated	SAE 20 Oil	-75° to 300°	00000000	0000

High-Temperature Dry-Running Sleeve Bearings

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Embedded

841 Bearing Bronze
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication Method	Temperature Range, °F		Each
For 3/16" Shaft Dia.
1/4"	3/8"	110 lbs. @ 120 rpm	Embedded	-50° to 700°	0000000	00000
5/16"	3/8"	110 lbs. @ 120 rpm	Embedded	-50° to 700°	0000000	000

Ultra-Low-Friction Dry-Running Sleeve Bearings

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Thermoplastic-blend bearings create the least amount of friction of any bearings that we offer. They handle heavier loads than PTFE and Rulon J bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Thermoplastic Blend Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Color	Temperature Range, °F		Each
For 3/16" Shaft Dia.
1/4"	1/4"	110 lbs. @ 120 rpm	Yellow	-55° to 190°	00000000	00000

Water-Resistant Dry-Running Sleeve Bearings

Good for underwater applications, these bearings won’t swell or warp when wet.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Rulon LR Plastic Bearings
ID	For Housing ID	Lg.	Dynamic Radial Load Capacity	Color	Temperature Range, °F		Each
For 6mm Shaft Dia.
6mm	12mm	12mm	110 lbs. @ 120 rpm	Maroon	-400° to 500°	00000000	000000

Static-Control Dry-Running Sleeve Bearings

Made of thermoplastic, these bearings conduct electricity to prevent static buildup in moving equipment. They’re self-lubricating, which reduces friction and prevents wear. They’re often used in applications that can’t have metal bearings or lubricants.

For technical drawings and 3-D models, click on a part number.

Thermoplastic Blend Bearings
For Housing ID, mm	Lg., mm	Dynamic Radial Load Capacity	Color	Temperature Range, °F	Surface Resistance		Each
For 8 mm Shaft Dia.
10	10	110 lbs. @ 120 rpm	Black	-40° to 245°	10⁸ ohms	0000000	00000

Oil-Embedded Flanged Sleeve Bearings

Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

Metric 841 Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 6mm Shaft Dia.
7.2mm	6mm	9.5mm	0.6mm	110 lbs. @ 120 rpm	90 lbs. @ 120 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	000000
8mm	6mm	12mm	1mm	110 lbs. @ 120 rpm	190 lbs. @ 120 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
10mm	6mm	14mm	2mm	110 lbs. @ 120 rpm	380 lbs. @ 120 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000

Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 6mm Shaft Dia.
10mm	6mm	14mm	2mm	110 lbs. @ 120 rpm	380 lbs. @ 120 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	00000

High-Load Food Industry Oil-Embedded Flanged Sleeve Bearings

Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. The oil is safe to touch food, though it shouldn’t regularly come in contact. Startup friction causes these bearings to release a thin layer of oil onto their surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.

841 bearing bronze bearings run at higher speeds than 863 iron-copper bearings. They’re also known as Oilite® bearings.

For technical drawings and 3-D models, click on a part number.

841 Bearing Bronze Bearings
For Housing ID	Length	Flange OD	Flange Thickness	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F	Specifications Met		Each
For 6mm Shaft Dia.
10mm	6mm	14mm	2mm	110 lbs. @ 120 rpm	380 lbs. @ 120 rpm	Lubricated	SAE 20 Oil	-75° to 300°	FDA Compliant 21 CFR 178.3570	00000000	00000

Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Thermoplastic blend bearings create the least amount of friction of any bearing that we offer. They handle heavier loads than PTFE and Rulon J bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Thermoplastic Blend Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Color	Temperature Range, °F		Each
For 3/8" Shaft Dia.
15/32"	1/4"	11/16"	1/16"	110 lbs. @ 120 rpm	165 lbs. @ 120 rpm	Yellow	-55° to 190°	0000000	000000
For 1/2" Shaft Dia.
19/32"	1/4"	7/8"	1/16"	110 lbs. @ 120 rpm	205 lbs. @ 120 rpm	Yellow	-55° to 190°	0000000	00000

Static-Control Dry-Running Flanged Sleeve Bearings

Made of thermoplastic, these bearings conduct electricity to prevent static buildup in loads parallel and perpendicular to your shaft. They’re self-lubricating, which reduces friction and prevents wear. They’re often chosen for applications where lubricants or metal bearings can’t be used.

For technical drawings and 3-D models, click on a part number.

Thermoplastic Blend Bearings
For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thick., mm	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Color	Temperature Range, °F	Surface Resistance		Each
For 8 mm Shaft Dia.
10	10	15	1	110 lbs. @ 120 rpm	90 lbs. @ 120 rpm	Black	-40° to 245°	10⁸ ohms	0000000	00000
For 10 mm Shaft Dia.
12	10	18	1	110 lbs. @ 120 rpm	105 lbs. @ 120 rpm	Black	-40° to 245°	10⁸ ohms	0000000	0000