About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 2 mm Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 5 | 2 | 12 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 00000000 | 00000 |
Light Duty Dry-Running Sleeve Bearings
Use where high loads and speeds are not required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Bearings | ||||||
|---|---|---|---|---|---|---|
For 1/8" Shaft Dia. | ||||||
| 1/4" | 1/4" | 12 lbs. @ 120 rpm | White | -10° to 220° | 000000 | 00000 |
Metric Nylon Bearings | ||||||
For 5mm Shaft Dia. | ||||||
| 8mm | 4mm | 12 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
For 6mm Shaft Dia. | ||||||
| 9mm | 4mm | 12 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
| 10mm | 4mm | 12 lbs. @ 120 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
Ultra-Low-Friction Dry-Running Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 1/8" Shaft Dia. | |||||||||
| 1/4" | 1/4" | 5/16" | 1/16" | 12 lbs. @ 120 rpm | 19 lbs. @ 120 rpm | White | -20° to 210° | 00000000 | 00000 |
For 5mm Shaft Dia. | |||||||||
| 8mm | 4mm | 11mm | 1.5mm | 12 lbs. @ 120 rpm | 25 lbs. @ 120 rpm | White | -20° to 210° | 00000000 | 0000 |
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
PTFE Plastic Bearings  | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 5 mm Shaft Dia. | ||||||||||
| 8mm | 10mm | 11mm | 1.5mm | 12 lbs. @ 120 rpm | 8.5 lbs. @ 120 rpm | White | -200° to 450° | FDA Compliant 21 CFR 177.1550 | 00000000 | 000000 |
For 6 mm Shaft Dia. | ||||||||||
| 9mm | 10mm | 12mm | 1.5mm | 12 lbs. @ 120 rpm | 8.5 lbs. @ 120 rpm | White | -200° to 450° | FDA Compliant 21 CFR 177.1550 | 00000000 | 00000 |
| 10mm | 10mm | 14mm | 2mm | 12 lbs. @ 120 rpm | 11 lbs. @ 120 rpm | White | -200° to 450° | FDA Compliant 21 CFR 177.1550 | 00000000 | 00000 |
For 8 mm Shaft Dia. | ||||||||||
| 11mm | 10mm | 14mm | 1.5mm | 12 lbs. @ 120 rpm | 9 lbs. @ 120 rpm | White | -200° to 450° | FDA Compliant 21 CFR 177.1550 | 00000000 | 00000 |