1,250 lbs. @ 60 rpm Dynamic Radial Load Capacity Bearings

Filter by

Bearing Type

DFARS Compliance

System of Measurement

Dynamic Radial Load Capacity @ Speed

For Load Direction

Lubrication

Maximum Temperature

Minimum Temperature

Plain Bearing Type

RoHS Compliance

Shaft Diameter

Shaft Mount Type

Shaft Type

For Housing ID

Length

Material

REACH Compliance

Lubricant

Lubrication Method

Flange Thickness

Dynamic Thrust Load Capacity @ Speed

Forward

How can we improve?

33 Products

About Plain Bearings

Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings

For 5/8" Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
3/4"	1"	1,250 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
13/16"	1"	1,250 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000
7/8"	1"	1,250 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000
15/16"	1"	1,250 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000
1"	1"	1,250 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000

High-Load Oil-Embedded Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.

863 iron-copper bearings are also known as Super Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper Bearings

For 13mm Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
16mm	16mm	1,250 lbs. @ 60 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	000000

Ultra-Low-Friction Oil-Embedded Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings

For 5/8" Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
3/4"	1"	1,250 lbs. @ 60 rpm	Lubricated	SAE 80 Oil with PTFE	-40° to 460°	0000000	00000

High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings

With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. Startup friction causes a thin layer of oil to release onto the surface. Their high iron content also means they resist failing if their load suddenly and drastically increases, but they won’t run as fast as standard bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper
For Housing ID, mm	Length, mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 13 mm Shaft Dia.
16	16	1,250 lbs. @ 60 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	000000

High-Load Food Industry Oil-Embedded Sleeve Bearings

Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings. Startup friction releases the embedded oil onto their surface in a thin layer. Bearings are made of 863 iron-copper, which makes these bearings strong and resistant to shock loads.

Bearings with NSF H1 registered lubrication comply with NSF standards for incidental contact with food.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper
For Housing ID	Length	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F	Specifications Met		Each
For 13mm Shaft Dia.
16mm	16mm	1,250 lbs. @ 60 rpm	Lubricated	SAE 20 Oil	-75° to 300°	ASTM B439, NSF Registered H1	00000000	000000

High-Load Dry-Running Sleeve Bearings

Bronze-Backed PTFE
Plastic Bearings
with Steel Shell

Frelon Plastic
Bearings with
6061 Aluminum Shell

A metal shell adds strength.

Bronze-backed PTFE bearings with steel shell combine high-load and high-speed capabilities. They resist swelling when exposed to moisture and are electrically conductive.

Frelon bearings with 6061 aluminum shell reduce vibration and are chemically inert.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric Bronze-Backed PTFE Plastic Bearings with Steel Shell
For Housing ID	Lg.	Dynamic Radial Load Capacity	Temperature Range, °F		Each
For 14mm Shaft Dia.
16mm	10mm	1,250 lbs. @ 60 rpm	-320° to 530°	0000000	00000
Frelon Plastic Bearings with 6061 Aluminum Shell
For 3/4" Shaft Dia.
1"	1"	1,250 lbs. @ 60 rpm	-400° to 400°	00000000	00000
Metric Frelon Plastic Bearings with 6061 Aluminum Shell
For 16mm Shaft Dia.
20mm	25mm	1,250 lbs. @ 60 rpm	-400° to 400°	00000000	00000
For 25mm Shaft Dia.
30mm	25mm	1,250 lbs. @ 60 rpm	-400° to 400°	0000000	00000

High-Temperature Dry-Running Sleeve Bearings

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Embedded

841 Bearing Bronze
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication Method	Temperature Range, °F		Each
For 5/8" Shaft Dia.
3/4"	1 1/4"	1,250 lbs. @ 60 rpm	Embedded	-50° to 700°	0000000	00000

Multipurpose Sleeve Bearings

These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

932 Bearing Bronze Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Temperature Range, °F		Each
For 5/8" Shaft Dia.
3/4"	1/2"	1,250 lbs. @ 60 rpm	Required	-350° to 450°	00000000	00000
13/16"	1/2"	1,250 lbs. @ 60 rpm	Required	-350° to 450°	00000000	0000

Corrosion-Resistant Sleeve Bearings

The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

954 Aluminum-Bronze Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Temperature Range, °F		Each
For 3/4" Shaft Dia.
1"	3/8"	1,250 lbs. @ 60 rpm	Required	-350° to 500°	00000000	000000

Oil-Embedded Flanged Sleeve Bearings

Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 5/8" Shaft Dia.
3/4"	1"	1"	1/8"	1,250 lbs. @ 60 rpm	950 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
7/8"	1"	1 1/8"	1/8"	1,250 lbs. @ 60 rpm	1,350 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000
1"	1"	1 1/4"	3/16"	1,250 lbs. @ 60 rpm	1,800 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000

Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 5/8" Shaft Dia.
3/4"	1"	1"	1/8"	1,250 lbs. @ 60 rpm	950 lbs. @ 60 rpm	Lubricated	ISO 68 Oil	-140° to 460°	0000000	00000
13/16"	1"	1"	1/8"	1,250 lbs. @ 60 rpm	950 lbs. @ 60 rpm	Lubricated	ISO 68 Oil	-140° to 460°	00000000	0000
7/8"	1"	1 1/8"	1/8"	1,250 lbs. @ 60 rpm	1,350 lbs. @ 60 rpm	Lubricated	ISO 68 Oil	-140° to 460°	00000000	0000
1"	1"	1 1/4"	3/16"	1,250 lbs. @ 60 rpm	1,800 lbs. @ 60 rpm	Lubricated	ISO 68 Oil	-140° to 460°	00000000	0000

Multipurpose Dry-Running Flanged Sleeve Bearings

Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings. Bearings resist corrosion in outdoor and saltwater environments.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

Metric Polyester Fabric-Reinforced PTFE Plastic Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Color	Temperature Range, °F		Each
For 20mm Shaft Dia.
26mm	20mm	32mm	3mm	1,250 lbs. @ 60 rpm	950 lbs. @ 60 rpm	Blue	-40° to 150°	0000000	000000

High-Load Dry-Running Flanged Sleeve Bearings

An aluminum shell adds strength. Made of Frelon, a PTFE composite, these bearings are both slippery and chemically inert.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Frelon Plastic Bearings with 6061 Aluminum Shell
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Temperature Range, °F		Each
For 3/4" Shaft Dia.
1"	1"	1 1/4"	1/8"	1,250 lbs. @ 60 rpm	800 lbs. @ 60 rpm	-400° to 400°	00000000	000000
For 16mm Shaft Dia.
20mm	25mm	27mm	3mm	1,250 lbs. @ 60 rpm	680 lbs. @ 60 rpm	-400° to 400°	00000000	00000
For 25mm Shaft Dia.
30mm	25mm	39mm	4mm	1,250 lbs. @ 60 rpm	900 lbs. @ 60 rpm	-400° to 400°	0000000	00000

High-Temperature Dry-Running Flanged Sleeve Bearings

841 Bearing Bronze

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication. They handle higher temperatures than 932 bearing bronze bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bearing Bronze
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Temperature Range, °F		Each
For 5/8" Shaft Dia.
7/8"	1 1/4"	1 1/8"	1/8"	1,250 lbs. @ 60 rpm	1,050 lbs. @ 60 rpm	-50° to 700°	0000000	00000

Multipurpose Flanged Sleeve Bearings

These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

932 Bearing Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Temperature Range, °F	PV Max.		Each
For 5/8" Shaft Dia.
3/4"	1/2"	7/8"	1/16"	1,250 lbs. @ 60 rpm	1,150 lbs. @ 60 rpm	Required	-350° to 450°	__	00000000	00000
7/8"	1/2"	1 1/8"	1/8"	1,250 lbs. @ 60 rpm	2,700 lbs. @ 60 rpm	Required	-350° to 450°	75,000	0000000	0000

Oil-Embedded Mounted Sleeve Bearings

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are self-aligning to compensate for shaft misalignment.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

		Overall				Mounting
For Shaft Dia.	Center Ht.	Ht.	Lg.	Wd.	Bearing Wd.	Hole Dia.	Hole Ctr.-to-Ctr.	Dynamic Radial Load Cap.	Temp. Range, °F	Alignment Style	Lubrication		Each
840 Bearing Bronze Bearings with Aluminum Housing
18mm	19mm	39.5mm	82.5mm	22.5mm	22.5mm	8.5mm	63.5mm	1,250 lbs. @ 60 rpm	-20° to 200°	Self Aligning	Lubricated	0000000	000000

Oil-Embedded Mounted Sleeve Bearings with Two-Bolt Flange

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. Bearings are self-aligning to compensate for shaft misalignment.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

	Overall					Mounting
For Shaft Dia.	Ht.	Lg.	Wd.	Bearing Wd.	Flange Thick.	Hole Dia.	Hole Ctr.-to-Ctr.	Dynamic Radial Load Cap.	Temp. Range, °F	Alignment Style	Lubrication		Each
840 Bearing Bronze Bearings with Aluminum Housing
18mm	41.5mm	82.5mm	22.5mm	21.5mm	6.5mm	10.5mm	63.5mm	1,250 lbs. @ 60 rpm	-20° to 200°	Self Aligning	Lubricated	0000000	000000