About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 9/16" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
11/16" | 1 1/4" | 1,400 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
3/4" | 1 1/4" | 1,400 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
13/16" | 1 1/4" | 1,400 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
For 5/8" Shaft Dia. | |||||||
3/4" | 1 1/8" | 1,400 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
7/8" | 1 1/8" | 1,400 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1" | 1 1/8" | 1,400 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
For 13/16" Shaft Dia. | |||||||
1" | 7/8" | 1,400 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
For 15/16" Shaft Dia. | |||||||
1 1/16" | 3/4" | 1,400 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 15mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
21mm | 16mm | 1,400 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 00000 |
For 16mm Shaft Dia. | |||||||
20mm | 16mm | 1,400 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
22mm | 16mm | 1,400 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 20mm Shaft Dia. | |||||||
24mm | 16mm | 1,400 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
26mm | 16mm | 1,400 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
Panel-Mount Oil-Embedded Sleeve Bearings
Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels. Bearings swivel to accommodate up to 5° of shaft misalignment. On startup, friction causes the bronze to release a thin layer of oil on the bearing’s surface. Not for use with plastic panels.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Lg. | Spline OD | For Min. Sheet Metal Thick. | Dynamic Radial Load Capacity | Misalignment Capability | Lubrication | Lubricant | Temperature Range, °F | Each | |
840 Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 7/8" Shaft Dia. | |||||||||
0.9" | 1.63" | 0.09" | 1,400 lbs. @ 60 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 000000 |
For 1" Shaft Dia. | |||||||||
0.9" | 1.63" | 0.09" | 1,400 lbs. @ 60 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 00000 |
High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings
With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. Startup friction causes a thin layer of oil to release onto the surface. Their high iron content also means they resist failing if their load suddenly and drastically increases, but they won’t run as fast as standard bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Length, mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper | |||||||
---|---|---|---|---|---|---|---|
For 15 mm Shaft Dia. | |||||||
19 | 16 | 1,400 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
21 | 16 | 1,400 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
For 16 mm Shaft Dia. | |||||||
20 | 16 | 1,400 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
22 | 16 | 1,400 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
For 20 mm Shaft Dia. | |||||||
24 | 16 | 1,400 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
26 | 16 | 1,400 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
28 | 16 | 1,400 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
High-Load Food Industry Oil-Embedded Sleeve Bearings
Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings. Startup friction releases the embedded oil onto their surface in a thin layer. Bearings are made of 863 iron-copper, which makes these bearings strong and resistant to shock loads.
Bearings with NSF H1 registered lubrication comply with NSF standards for incidental contact with food.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Length | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
863 Iron-Copper | ||||||||
---|---|---|---|---|---|---|---|---|
For 15mm Shaft Dia. | ||||||||
19mm | 16mm | 1,400 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | ASTM B439, NSF Registered H1 | 00000000 | 00000 |
For 16mm Shaft Dia. | ||||||||
22mm | 16mm | 1,400 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | ASTM B439, NSF Registered H1 | 00000000 | 0000 |
For 20mm Shaft Dia. | ||||||||
24mm | 16mm | 1,400 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | ASTM B439, NSF Registered H1 | 00000000 | 0000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||
---|---|---|---|---|---|---|
For 7/8" Shaft Dia. | ||||||
1 1/8" | 1" | 1,400 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 15mm Shaft Dia. | ||||||||||
19mm | 16mm | 23mm | 2mm | 1,400 lbs. @ 60 rpm | 900 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 00000 |
For 16mm Shaft Dia. | ||||||||||
20mm | 16mm | 24mm | 2mm | 1,400 lbs. @ 60 rpm | 910 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
22mm | 16mm | 28mm | 3mm | 1,400 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 0000 |
For 20mm Shaft Dia. | ||||||||||
24mm | 16mm | 28mm | 2mm | 1,400 lbs. @ 60 rpm | 940 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
26mm | 16mm | 32mm | 3mm | 1,400 lbs. @ 60 rpm | 1,300 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
3/4" | 1 1/8" | 1" | 1/8" | 1,400 lbs. @ 60 rpm | 950 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 00000 |
High-Load Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications. They withstand greater weight and shock loads than standard bearings, but operate at lower speeds.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Length, mm | Flange OD, mm | Flange Thickness, mm | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
15 mm Shaft Dia. | ||||||||||
19 | 16 | 23 | 2 | 1,400 lbs. @ 60 rpm | 910 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 00000 |
21 | 16 | 27 | 3 | 1,400 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 0000 |
16 mm Shaft Dia. | ||||||||||
20 | 16 | 24 | 2 | 1,400 lbs. @ 60 rpm | 910 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 0000 |
22 | 16 | 28 | 3 | 1,400 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 0000 |
20 mm Shaft Dia. | ||||||||||
24 | 16 | 28 | 2 | 1,400 lbs. @ 60 rpm | 940 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 0000 |
26 | 16 | 32 | 3 | 1,400 lbs. @ 60 rpm | 1,300 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 0000 |
High-Temperature Dry-Running Flanged Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication. They handle higher temperatures than 932 bearing bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||||
---|---|---|---|---|---|---|---|---|
For 7/8" Shaft Dia. | ||||||||
1 1/8" | 1" | 1 1/2" | 1/8" | 1,400 lbs. @ 60 rpm | 1,850 lbs. @ 60 rpm | -50° to 700° | 0000000 | 00000 |
Corrosion-Resistant Flanged Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||||
7/8" | 1/2" | 1 1/8" | 1/8" | 1,400 lbs. @ 60 rpm | 3,050 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 000000 |
Oil-Embedded Mounted Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
840 Bearing Bronze Bearings with Aluminum Housing | |||||||||||||
7/8" | 1" | 1 15/16" | 4" | 29/32" | 29/32" | 11/32" | 3 1/8" | 1,400 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 000000 | 000000 |
1" | 1 1/4" | 2 9/16" | 5" | 29/32" | 29/32" | 9/16" | 4" | 1,400 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 000000 | 00000 |
20mm | 19mm | 39.5mm | 82.5mm | 22.5mm | 21.5mm | 9mm | 63.5mm | 1,400 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 00000 |
25mm | 32mm | 65mm | 127mm | 22.5mm | 22.5mm | 14mm | 101.5mm | 1,400 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 00000 |
Oil-Embedded Mounted Sleeve Bearings with Two-Bolt Flange
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. Bearings are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
840 Bearing Bronze Bearings with Aluminum Housing | |||||||||||||
7/8" | 1 7/8" | 4" | 29/32" | 29/32" | 5/16" | 13/32" | 3 1/8" | 1,400 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 000000 |
1" | 2 5/8" | 5" | 3/8" | 29/32" | 3/8" | 9/16" | 4" | 1,400 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 00000 |
25mm | 66.5mm | 127mm | 22.5mm | 23mm | 9.5mm | 14.5mm | 101.5mm | 1,400 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 00000 |