About Plain Bearings
More
Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/639/6391k214p1-d03c-digitall@halfx_637055105703313267.png?ver=imagenotfound)
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 9/16" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/4" | 1 3/8" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
7/8" | 1 3/8" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
For 11/16" Shaft Dia. | |||||||
7/8" | 1 1/8" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
For 3/4" Shaft Dia. | |||||||
7/8" | 1" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
15/16" | 1" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1" | 1" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1 1/16" | 1" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1 1/8" | 1" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1 1/4" | 1" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
For 7/8" Shaft Dia. | |||||||
1 1/8" | 7/8" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 1" Shaft Dia. | |||||||
1 1/8" | 3/4" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1 3/16" | 3/4" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1 1/4" | 3/4" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1 3/8" | 3/4" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 22 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
27 | 22 | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
28 | 22 | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
29 | 22 | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/168/1688k16p1-d03c-digitall@halfx_637051672182538562.png?ver=imagenotfound)
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 3/4" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
7/8" | 1" | 1,500 lbs. @ 60 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 0000000 | 00000 |
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 25mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
30 | 20 | 1,500 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
Food Industry Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/709/7095k46p1-d03c-digitall@halfx_637054254811407456.png?ver=imagenotfound)
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
High-Load Dry-Running Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/606/60695k5p1-d03c-digital@halfx_637051207601409897.png?ver=imagenotfound)
Plastic Bearings
with Steel Shell
![](/prerenderstable/mvPRE/contents/gfx/imagecache/595/59575k53p1-d03c-digitall@halfx_637051282823825825.png?ver=imagenotfound)
Bearings with
6061 Aluminum Shell
A metal shell adds strength.
Bronze-backed PTFE bearings with steel shell combine high-load and high-speed capabilities. They resist swelling when exposed to moisture and are electrically conductive.
Frelon bearings with 6061 aluminum shell reduce vibration and are chemically inert.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Temperature Range, °F | Each | |
Metric Bronze-Backed PTFE Plastic Bearings with Steel Shell | |||||
---|---|---|---|---|---|
For 14mm Shaft Dia. | |||||
16mm | 12mm | 1,500 lbs. @ 60 rpm | -320° to 530° | 0000000 | 00000 |
Metric Frelon Plastic Bearings with 6061 Aluminum Shell | |||||
For 20mm Shaft Dia. | |||||
25mm | 30mm | 1,500 lbs. @ 60 rpm | -400° to 400° | 00000000 | 00000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/936/9368t25p1-d03c-digitall@halfx_637054253904243363.png?ver=imagenotfound)
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||
---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||
3/4" | 1 1/2" | 1,500 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 00000 |
7/8" | 1 1/2" | 1,500 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
For 3/4" Shaft Dia. | ||||||
7/8" | 1 1/4" | 1,500 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
1" | 1 1/4" | 1,500 lbs. @ 60 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
Multipurpose Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/638/6381k47p1-d03c-digitall@halfx_637056020238194639.png?ver=imagenotfound)
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/633/6338k419c3-d03c-digital-master1569879013-p9@halfx_637054673023484059.png?ver=imagenotfound)
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||||||
15/16" | 1" | 1 1/4" | 1/8" | 1,500 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
1" | 1" | 1 3/16" | 1/16" | 1,500 lbs. @ 60 rpm | 1,300 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
1" | 1" | 1 3/16" | 1/8" | 1,500 lbs. @ 60 rpm | 1,300 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
1" | 1" | 1 1/4" | 1/8" | 1,500 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
1" | 1" | 1 1/4" | 5/32" | 1,500 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
1" | 1" | 1 1/4" | 3/16" | 1,500 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 1" Shaft Dia. | ||||||||||
1 1/4" | 3/4" | 1 1/2" | 1/8" | 1,500 lbs. @ 60 rpm | 1,950 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1 1/4" | 3/4" | 1 1/2" | 3/16" | 1,500 lbs. @ 60 rpm | 1,950 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1 3/8" | 3/4" | 1 5/8" | 3/16" | 1,500 lbs. @ 60 rpm | 2,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
Metric 841 Bronze Bearings | ||||||||||
For 22mm Shaft Dia. | ||||||||||
27mm | 22mm | 32mm | 2.5mm | 1,500 lbs. @ 60 rpm | 1,300 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
29mm | 22mm | 36mm | 3.5mm | 1,500 lbs. @ 60 rpm | 1,950 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/167/1677k9--4831a7b90d81610475231-p9@halfx_637460504502675306.png?ver=imagenotfound)
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||||||
15/16" | 1" | 1 1/4" | 1/8" | 1,500 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 00000 |
1" | 1" | 1 1/4" | 3/16" | 1,500 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 0000000 | 0000 |
For 1" Shaft Dia. | ||||||||||
1 1/4" | 3/4" | 1 1/2" | 1/8" | 1,500 lbs. @ 60 rpm | 1,950 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 0000000 | 0000 |
1 3/8" | 3/4" | 1 5/8" | 3/16" | 1,500 lbs. @ 60 rpm | 2,500 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
For 25mm Shaft Dia. | ||||||||||
30mm | 20mm | 35mm | 2.5mm | 1,500 lbs. @ 60 rpm | 1,450 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
32mm | 20mm | 39mm | 3.5mm | 1,500 lbs. @ 60 rpm | 2,150 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/374/3746k16c1-d03c-digital-master1569533447-p9@halfx_637051268441216763.png?ver=imagenotfound)
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface. All are FDA Compliant or NSF Registered, so they're safe for use in food applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
841 Bronze Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | |||||||||||
1" | 1" | 1 1/4" | 3/16" | 1,500 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | ISO 100 Oil | -75° to 300° | NSF Registered H1 | 0000000 | 00000 |
For 1" Shaft Dia. | |||||||||||
1 1/4" | 3/4" | 1 1/2" | 1/8" | 1,500 lbs. @ 60 rpm | 1,950 lbs. @ 60 rpm | Lubricated | ISO 100 Oil | -75° to 300° | NSF Registered H1 | 0000000 | 0000 |
Oil-Embedded Flanged Sleeve Bearings with Certification
![](/prerenderstable/mvPRE/contents/gfx/imagecache/633/6338k419c2-d03c-digital-master1569879013-p9@halfx_637054738165413803.png?ver=imagenotfound)
These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings; startup friction causes them to release a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||||||
1" | 1" | 1 1/4" | 3/16" | 1,500 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 000000 |
For 1" Shaft Dia. | ||||||||||
1 1/4" | 3/4" | 1 1/2" | 1/8" | 1,500 lbs. @ 60 rpm | 1,950 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
High-Load Dry-Running Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/595/59575k73c1-d03c-digital-master1569533452-p9@halfx_637051260849617215.png?ver=imagenotfound)
An aluminum shell adds strength. Made of Frelon, a PTFE composite, these bearings are both slippery and chemically inert.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
Frelon Plastic Bearings with 6061 Aluminum Shell | ||||||||
---|---|---|---|---|---|---|---|---|
For 20mm Shaft Dia. | ||||||||
26mm | 30mm | 32mm | 3mm | 1,500 lbs. @ 60 rpm | 760 lbs. @ 60 rpm | -400° to 400° | 00000000 | 000000 |
High-Temperature Dry-Running Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/944/9440t37--5bd1fe19f451610480242-p9@halfx_637460554454108336.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/296/2962t2--36c18249be01610556109-p9@halfx_637461313471637916.png?ver=imagenotfound)
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication. They handle higher temperatures than 932 bearing bronze bearings.
932 bearing bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 660 leaded bronze bearings. A filled groove on the inside of the bearing distributes the graphite evenly along the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||||
---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||||
1" | 1 1/4" | 1 1/4" | 3/16" | 1,500 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | -50° to 700° | 0000000 | 00000 |
932 Bearing Bronze | ||||||||
For 3/4" Shaft Dia. | ||||||||
7/8" | 1/2" | 1 1/4" | 1/8" | 1,500 lbs. @ 60 rpm | 3,000 lbs. @ 60 rpm | -70° to 450° | 000000 | 00000 |
Multipurpose Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/781/7815k31--165e839e8541610741365-p9@halfx_637463165782414248.png?ver=imagenotfound)
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||||||
7/8" | 1/2" | 1 1/8" | 1/8" | 1,500 lbs. @ 60 rpm | 2,200 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 00000 |
7/8" | 1/2" | 1 1/4" | 1/8" | 1,500 lbs. @ 60 rpm | 3,000 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
1" | 1/2" | 1 1/8" | 1/8" | 1,500 lbs. @ 60 rpm | 2,200 lbs. @ 60 rpm | Required | -350° to 450° | __ | 00000000 | 0000 |
Multipurpose Flanged Sleeve Bearings with Certification
![](/prerenderstable/mvPRE/contents/gfx/imagecache/781/7815k31c4-d03c-digital-master1569619879-p9@halfx_637052023814153267.png?ver=imagenotfound)
Furnished with a traceable lot number and material test report, these 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | |||||||||
7/8" | 1/2" | 1 1/8" | 1/8" | 1,500 lbs. @ 60 rpm | 2,200 lbs. @ 60 rpm | Required | -70° to 450° | 000000000 | 000000 |