About Plain Bearings
More
Light Duty Dry-Running Sleeve Bearings
Use where high loads and speeds are not required.
Acetal bearings have low moisture absorption and are more chemical resistant than nylon and MDS-filled nylon bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Acetal Bearings | ||||||
---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||
7/8" | 1" | 170 lbs. @ 60 rpm | White | -20° to 180° | 0000000 | 00000 |
For 3/4" Shaft Dia. | ||||||
1" | 1" | 170 lbs. @ 60 rpm | White | -20° to 180° | 0000000 | 0000 |
For 1" Shaft Dia. | ||||||
1 1/8" | 1" | 170 lbs. @ 60 rpm | White | -20° to 180° | 0000000 | 00000 |
1 1/4" | 1" | 170 lbs. @ 60 rpm | White | -20° to 180° | 0000000 | 00000 |
Panel-Mount Dry-Running Sleeve Bearings
Permanently and securely install these self-clinching bearings into panels, with no need for precision-bored holes or machined mounts. They’re often used in areas with tight space restrictions. Install them into sheet metal panels with an air-powered or hydraulic press. They’re not for use in plastic panels. These bearings are self-aligning to compensate for small amounts of shaft misalignment. Made of acetal plastic, they won’t warp or swell when exposed to water, so they’re good for use in washdown environments.
For technical drawings and 3-D models, click on a part number.
Length | Spline OD | For Minimum Sheet Metal Thickness | Dynamic Radial Load Capacity | Misalignment Capability | Temperature Range, °F | Each | |
Acetal Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 3/4" Shaft Diameter | |||||||
0.9" | 1.3" | 0.058" | 170 lbs. @ 60 rpm | 5° | -40° to 180° | 0000000 | 000000 |
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
Acetal bearings have low moisture absorption and are more chemical resistant than nylon and MDS-filled nylon bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Acetal Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||||
7/8" | 1" | 1" | 1/8" | 170 lbs. @ 60 rpm | 80 lbs. @ 60 rpm | White | -20° to 180° | 0000000 | 00000 |
For 3/4" Shaft Dia. | |||||||||
1" | 1" | 1 3/16" | 1/16" | 170 lbs. @ 60 rpm | 95 lbs. @ 60 rpm | White | -40° to 180° | 0000000 | 0000 |
1" | 1" | 1 3/16" | 1/8" | 170 lbs. @ 60 rpm | 95 lbs. @ 60 rpm | White | -20° to 180° | 0000000 | 00000 |
1" | 1" | 1 1/4" | 5/32" | 170 lbs. @ 60 rpm | 105 lbs. @ 60 rpm | White | -40° to 180° | 0000000 | 0000 |
For 1" Shaft Dia. | |||||||||
1 1/8" | 1" | 1 3/8" | 1/16" | 170 lbs. @ 60 rpm | 85 lbs. @ 60 rpm | White | -40° to 180° | 0000000 | 00000 |
1 1/4" | 1" | 1 7/16" | 1/16" | 170 lbs. @ 60 rpm | 100 lbs. @ 60 rpm | White | -40° to 180° | 0000000 | 00000 |
1 1/4" | 1" | 1 7/16" | 1/8" | 170 lbs. @ 60 rpm | 100 lbs. @ 60 rpm | White | -20° to 180° | 0000000 | 00000 |
1 1/4" | 1" | 1 1/2" | 3/16" | 170 lbs. @ 60 rpm | 110 lbs. @ 60 rpm | White | -40° to 180° | 0000000 | 00000 |
Dry-Running Mounted Sleeve Bearings
Made from slippery materials, these bearings reduce friction without the oily mess. They are self-aligning to compensate for shaft misalignment.
Acetal bearings do not warp or swell when exposed to water, so they’re often used in washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Acetal Plastic Bearings with Aluminum Housing | ||||||||||||
7/8" | 1" | 1 15/16" | 4" | 29/32" | 29/32" | 11/32" | 3 1/8" | 170 lbs. @ 60 rpm | -40° to 180° | Self Aligning | 0000000 | 000000 |
1" | 1 1/4" | 2 9/16" | 5" | 29/32" | 29/32" | 9/16" | 4" | 170 lbs. @ 60 rpm | -40° to 180° | Self Aligning | 0000000 | 00000 |
25mm | 32mm | 65.1mm | 127mm | 22.8mm | 22.8mm | 14.3mm | 101.6mm | 170 lbs. @ 60 rpm | -40° to 180° | Self Aligning | 0000000 | 00000 |
Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange
Embedded lubricant particles increase the load capacity of these bearings while also making them slippery. Bearings are self-aligning to compensate for shaft misalignment.
Acetal sleeve bearings won’t warp or swell when exposed to water, making them good for use in washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Acetal Plastic Bearings with Aluminum Housing | ||||||||||||
7/8" | 1 7/8" | 4" | 29/32" | 29/32" | 5/16" | 13/32" | 3 1/8" | 170 lbs. @ 60 rpm | -40° to 180° | Self Aligning | 00000000 | 000000 |
1" | 2 5/8" | 5" | 29/32" | 29/32" | 3/8" | 9/16" | 4" | 170 lbs. @ 60 rpm | -40° to 180° | Self Aligning | 00000000 | 00000 |
Light Duty Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange
Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.
Acetal bearings won’t warp or swell when exposed to water, so they’re good for use in damp environments. They’re also self-aligning, which means they swivel to compensate for small amounts of shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Acetal Plastic Bearings with Black-Oxide Steel Housing | ||||||||||||
3/4" | 1 55/64" | 2 11/32" | 57/64" | 51/64" | 3/32" | 7/32" | 1 25/32" | 170 lbs. @ 60 rpm | -40° to 180° | Self Aligning | 0000000 | 000000 |
1" | 2" | 3 1/4" | 29/32" | 13/16" | 3/32" | 9/32" | 2 1/2" | 170 lbs. @ 60 rpm | -40° to 180° | Self Aligning | 0000000 | 00000 |