About Plain Bearings
More
Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/639/6391k214p1-d03c-digitall@halfx_637055105703313267.png?ver=imagenotfound)
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 6 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
9 | 12 | 220 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
10 | 12 | 220 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
12 | 12 | 220 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
High-Load Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/374/3741k9p1-d03c-digitall@halfx_637055970649769879.png?ver=imagenotfound)
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/7460n196polished-brassnegative_right_positive_front_standard15_1620947709_974@halfx_637565266804646966.png?ver=imagenotfound)
With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. Startup friction causes a thin layer of oil to release onto the surface. Their high iron content also means they resist failing if their load suddenly and drastically increases, but they won’t run as fast as standard bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
High-Load Food Industry Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/740/7407n149sandstonenegative_right_positive_front_standard15_1614724570_135@halfx_637502998507246792.png?ver=imagenotfound)
Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings. Startup friction releases the embedded oil onto their surface in a thin layer. Bearings are made of 863 iron-copper, which makes these bearings strong and resistant to shock loads.
Bearings with NSF H1 registered lubrication comply with NSF standards for incidental contact with food.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Length | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
863 Iron-Copper | ||||||||
---|---|---|---|---|---|---|---|---|
For 6mm Shaft Dia. | ||||||||
9mm | 6mm | 220 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | ASTM B439, NSF Registered H1 | 00000000 | 00000 |
Ultra-Low-Friction Dry-Running Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/263/2639t23p1-d03c-digitall@halfx_637051674143660163.png?ver=imagenotfound)
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Thermoplastic-blend bearings create the least amount of friction of any bearings that we offer. They handle heavier loads than PTFE and Rulon J bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
Multipurpose Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/638/6381k47p1-d03c-digitall@halfx_637056020238194639.png?ver=imagenotfound)
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 6mm Shaft Dia. | ||||||
8mm | 6mm | 220 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/633/6338k419c3-d03c-digital-master1569879013-p9@halfx_637054673023484059.png?ver=imagenotfound)
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
Metric 841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 6mm Shaft Dia. | ||||||||||
10mm | 12mm | 14mm | 2mm | 220 lbs. @ 120 rpm | 230 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/373/3731k9--fcc0ac8d8c1605887326-p9@halfx_637414625303035933.png?ver=imagenotfound)
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 6mm Shaft Dia. | ||||||||||
10mm | 6mm | 14mm | 2mm | 220 lbs. @ 120 rpm | 390 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 00000 |
High-Load Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/711/7119n136-1621887938-p9@halfx_637574671502365871.png?ver=imagenotfound)
With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications. They withstand greater weight and shock loads than standard bearings, but operate at lower speeds.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Length, mm | Flange OD, mm | Flange Thickness, mm | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
6 mm Shaft Dia. | ||||||||||
10 | 6 | 14 | 2 | 220 lbs. @ 120 rpm | 390 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 00000 |
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/270/2706t28--830c5b7f0a61610478769-p9@halfx_637460539880578309.png?ver=imagenotfound)
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Thermoplastic blend bearings create the least amount of friction of any bearing that we offer. They handle heavier loads than PTFE and Rulon J bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Thermoplastic Blend Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | |||||||||
5/16" | 1/2" | 1/2" | 1/32" | 220 lbs. @ 120 rpm | 130 lbs. @ 120 rpm | Yellow | -55° to 190° | 0000000 | 000000 |
For 3/8" Shaft Dia. | |||||||||
15/32" | 1/2" | 11/16" | 1/16" | 220 lbs. @ 120 rpm | 165 lbs. @ 120 rpm | Yellow | -55° to 190° | 0000000 | 00000 |
For 1/2" Shaft Dia. | |||||||||
19/32" | 1/2" | 7/8" | 1/16" | 220 lbs. @ 120 rpm | 205 lbs. @ 120 rpm | Yellow | -55° to 190° | 0000000 | 00000 |
High-Temperature Dry-Running Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/296/2962t2--36c18249be01610556109-p9@halfx_637461313471637916.png?ver=imagenotfound)
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
932 bearing bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 660 leaded bronze bearings. A filled groove on the inside of the bearing distributes the graphite evenly along the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
932 Bearing Bronze | ||||||||
---|---|---|---|---|---|---|---|---|
For 6mm Shaft Dia. | ||||||||
10mm | 6mm | 12mm | 2mm | 220 lbs. @ 120 rpm | 520 lbs. @ 120 rpm | -350° to 450° | 00000000 | 000000 |
Multipurpose Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/781/7815k31--165e839e8541610741365-p9@halfx_637463165782414248.png?ver=imagenotfound)
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
Metric 932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 6mm Shaft Dia. | ||||||||||
10mm | 6mm | 12mm | 2mm | 220 lbs. @ 120 rpm | 520 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 00000000 | 00000 |
10mm | 6mm | 14mm | 2mm | 220 lbs. @ 120 rpm | 770 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 0000 |