2,300 lbs. @ 30 rpm Dynamic Radial Load Capacity Bearings

Filter by

System of Measurement

Shaft Diameter

Dynamic Radial Load Capacity @ Speed

Mounted Bearing Type

Overall Length

Bearing Type

DFARS Compliance

Lubricant

Lubrication

Lubrication Method

Maximum Temperature

Minimum Temperature

REACH Compliance

RoHS Compliance

Shaft Type

For Load Direction

Plain Bearing Type

Shaft Mount Type

Material

Length

Flange Thickness

For Housing ID

Forward

How can we improve?

6 Products

About Plain Bearings

Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings

For 30 mm Shaft Dia.
For Housing ID, mm	Lg., mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
35	25	2,300 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
38	25	2,300 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
40	25	2,300 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000

Ultra-Low-Friction Oil-Embedded Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings

For 30mm Shaft Dia.
For Housing ID, mm	Lg., mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
38	25	2,300 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	000000

Oil-Embedded Flanged Sleeve Bearings

Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 30mm Shaft Dia.
38mm	25mm	46mm	4mm	2,300 lbs. @ 30 rpm	2,950 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	10° to 220°	00000000	000000

Oil-Embedded Mounted Sleeve Bearings with Two-Bolt Flange

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. Bearings are self-aligning to compensate for shaft misalignment.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

	Overall					Mounting
For Shaft Dia.	Ht.	Lg.	Wd.	Bearing Wd.	Flange Thick.	Hole Dia.	Hole Ctr.-to-Ctr.	Dynamic Radial Load Cap.	Temp. Range, °F	Alignment Style	Lubrication		Each
840 Bearing Bronze Bearings with Aluminum Housing
1 1/4"	2 5/8"	5"	61/64"	61/64"	3/8"	9/16"	4"	2,300 lbs. @ 30 rpm	-20° to 200°	Self Aligning	Lubricated	0000000	000000