About Plain Bearings
More
Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/639/6391k214p1-d03c-digitall@halfx_637055105703313267.png?ver=imagenotfound)
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 5/8" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
13/16" | 2" | 2,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 00000 |
7/8" | 2" | 2,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
1" | 2" | 2,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
For 1" Shaft Dia. | |||||||
1 1/8" | 1 1/4" | 2,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1 1/4" | 1 1/4" | 2,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
1 5/16" | 1 1/4" | 2,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
1 3/8" | 1 1/4" | 2,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
1 1/2" | 1 1/4" | 2,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
High-Load Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/374/3741k9p1-d03c-digitall@halfx_637055970649769879.png?ver=imagenotfound)
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 5/8" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/4" | 1 1/8" | 2,500 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 00000 |
Food Industry Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/709/7095k46p1-d03c-digitall@halfx_637054254811407456.png?ver=imagenotfound)
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
1 1/4" | 1 1/4" | 2,500 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 0000000 | 000000 |
High-Load Dry-Running Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/606/60695k5p1-d03c-digital@halfx_637051207601409897.png?ver=imagenotfound)
Plastic Bearings
with Steel Shell
A metal shell adds strength.
Bronze-backed PTFE bearings with steel shell combine high-load and high-speed capabilities. They resist swelling when exposed to moisture and are electrically conductive.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Multipurpose Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/638/6381k47p1-d03c-digitall@halfx_637056020238194639.png?ver=imagenotfound)
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||
3/4" | 1" | 2,500 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
13/16" | 1" | 2,500 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 0000 |
7/8" | 1" | 2,500 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 0000 |
Corrosion-Resistant Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/286/2867t55p1-d03c-digitall@halfx_637051677168204739.png?ver=imagenotfound)
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/633/6338k419c3-d03c-digital-master1569879013-p9@halfx_637054673023484059.png?ver=imagenotfound)
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1" Shaft Dia. | ||||||||||
1 1/4" | 1 1/4" | 1 1/2" | 1/8" | 2,500 lbs. @ 60 rpm | 1,950 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/167/1677k9--4831a7b90d81610475231-p9@halfx_637460504502675306.png?ver=imagenotfound)
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 1" Shaft Dia. | ||||||||||
1 1/4" | 1 1/4" | 1 1/2" | 1/8" | 2,500 lbs. @ 60 rpm | 1,950 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 00000 |
Multipurpose Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/781/7815k31--165e839e8541610741365-p9@halfx_637463165782414248.png?ver=imagenotfound)
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
3/4" | 1" | 1" | 1/8" | 2,500 lbs. @ 60 rpm | 1,900 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 00000 |
7/8" | 1" | 1 1/8" | 1/8" | 2,500 lbs. @ 60 rpm | 2,700 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
1" | 1" | 1 1/4" | 3/16" | 2,500 lbs. @ 60 rpm | 3,500 lbs. @ 60 rpm | Required | -350° to 450° | __ | 00000000 | 00000 |
Corrosion-Resistant Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/293/2934t13--8a9bf1db9641611170069-p9@halfx_637467452743756486.png?ver=imagenotfound)
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | |||||||||
7/8" | 3/4" | 1 1/8" | 1/8" | 2,500 lbs. @ 60 rpm | 2,450 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 000000 |
7/8" | 3/4" | 1 1/4" | 1/8" | 2,500 lbs. @ 60 rpm | 3,500 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
1" | 3/4" | 1 1/4" | 3/16" | 2,500 lbs. @ 60 rpm | 3,500 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 0000 |
Dry-Running Mounted Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/282/2820t9c2-d03c-digital-master1569533445-p9@halfx_637051181933929789.png?ver=imagenotfound)
Made from slippery materials, these bearings reduce friction without the oily mess. They are self-aligning to compensate for shaft misalignment.
Bronze bearings have embedded particles of slippery PTFE to reduce friction during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Bronze Bearings with Aluminum Housing | ||||||||||||
15mm | 19mm | 39.5mm | 82.5mm | 20mm | 19.8mm | 8.5mm | 63.5mm | 2,500 lbs. @ 60 rpm | -40° to 280° | Self Aligning | 0000000 | 000000 |