About Plain Bearings
More
Ultra-Low-Friction Dry-Running Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/263/2639t23p1-d03c-digitall@halfx_637051674143660163.png?ver=imagenotfound)
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Thermoplastic-blend bearings create the least amount of friction of any bearings that we offer. They handle heavier loads than PTFE and Rulon J bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Thermoplastic Blend Bearings | ||||||
---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | ||||||
19/32" | 3/4" | 330 lbs. @ 120 rpm | Yellow | -55° to 190° | 00000000 | 000000 |
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/270/2706t28--830c5b7f0a61610478769-p9@halfx_637460539880578309.png?ver=imagenotfound)
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Thermoplastic blend bearings create the least amount of friction of any bearing that we offer. They handle heavier loads than PTFE and Rulon J bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Thermoplastic Blend Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 3/8" Shaft Dia. | |||||||||
15/32" | 3/4" | 11/16" | 1/16" | 330 lbs. @ 120 rpm | 165 lbs. @ 120 rpm | Yellow | -55° to 190° | 0000000 | 000000 |
For 1/2" Shaft Dia. | |||||||||
19/32" | 3/4" | 7/8" | 1/16" | 330 lbs. @ 120 rpm | 205 lbs. @ 120 rpm | Yellow | -55° to 190° | 0000000 | 00000 |
Multipurpose Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/781/7815k31--165e839e8541610741365-p9@halfx_637463165782414248.png?ver=imagenotfound)
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 932 Bearing Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 9mm Shaft Dia. | |||||||||
14mm | 6mm | 19mm | 2.5mm | 330 lbs. @ 120 rpm | 1,050 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
Oil-Embedded Mounted Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/591/5912k61c1-d03c-digital-master1570539520-p9@halfx_637061183423032554.png?ver=imagenotfound)
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
840 Bearing Bronze Bearings with Aluminum Housing | |||||||||||||
3/8" | 9/16" | 1 1/8" | 2 1/4" | 3/8" | 29/64" | 9/32" | 1 3/4" | 330 lbs. @ 120 rpm | -20° to 200° | Self Aligning | Lubricated | 000000 | 000000 |
Food Industry Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange
![](/prerenderstable/mvPRE/contents/gfx/imagecache/294/2943n5c1-d03c-digital-master1569533447-p9@halfx_637051181945140445.png?ver=imagenotfound)
Made of FDA listed PEEK, these bearings are suitable for direct contact with food. They withstand wet, corrosive environments and have good chemical compatibility. The closed backing blocks out dust and other contaminants.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Specifications Met | Each | |
PEEK Plastic Bearings with PEEK Plastic Housing | |||||||||||||
3/16" | 9/16" | 63/64" | 7/16" | 9/32" | 5/32" | 9/64" | 19/32" | 330 lbs. @ 120 rpm | -140° to 480° | Fixed Alignment | FDA Compliant 21 CFR 177.2415 | 000000 | 00000 |