About Plain Bearings
More
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
Thermoplastic-blend bearings have low moisture absorption and create very low friction in applications with light loads, and frequent starts and stops.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Thermoplastic-Blend Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 3mm Shaft Dia. | |||||||||
| 4.5mm | 3mm | 7.5mm | 0.75mm | 36 lbs. @ 120 rpm | 60 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 00000 |
For 4mm Shaft Dia. | |||||||||
| 5.5mm | 3mm | 9.5mm | 0.75mm | 36 lbs. @ 120 rpm | 70 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 0000 |
For 5mm Shaft Dia. | |||||||||
| 7mm | 3mm | 11mm | 1mm | 36 lbs. @ 120 rpm | 80 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 0000 |
For 8mm Shaft Dia. | |||||||||
| 10mm | 3mm | 15mm | 1mm | 36 lbs. @ 120 rpm | 100 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 0000 |
Self-Aligning Dry-Running Flanged Sleeve Bearings
Compensating for minor shaft misalignment and not requiring lubrication, these sleeve bearings swivel to self-align and are dry running. They don’t need a housing and you can install and replace them without any tools because they’re slip fit. Mount them in injection-molded panels, thin sheet metal, and hard non-ductile material. Made of acetal, they won’t warp or swell when exposed to water, so they’re good for washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Shaft Diameter | For Housing ID | Length | Flange OD | Flange Thickness | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Misalignment Capability | Color | Temperature Range, °F | Each | |
Acetal Plastic Bearings  | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6mm | 12.7mm | 9.6mm | 14.2mm | 0.8mm | 36 lbs. @ 120 rpm | 34 lbs. @ 120 rpm | 5° | Black | -40° to 180° | 0000000 | 000000 |
Dry-Running Mounted Sleeve Bearings
Made from slippery materials, these bearings reduce friction without the oily mess. They are self-aligning to compensate for shaft misalignment.
Acetal bearings do not warp or swell when exposed to water, so they’re often used in washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Acetal Plastic Bearings with Aluminum Housing | ||||||||||||
| 6mm | 9.5mm | 19.1mm | 36.6mm | 9.7mm | 9.7mm | 5.1mm | 28.6mm | 36 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 0000000 | 000000 |
| 6mm | 14.5mm | 28.6mm | 57.2mm | 9.8mm | 9.8mm | 7.1mm | 44.5mm | 36 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 0000000 | 00000 |