About Plain Bearings
More
High-Load Dry-Running Sleeve Bearings
Bearings with
6061 Aluminum Shell
A metal shell adds strength.
Frelon bearings with 6061 aluminum shell reduce vibration and are chemically inert.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||
---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||
3/8" | 1" | 400 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 00000 |
1/2" | 1" | 400 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
For 1/2" Shaft Dia. | ||||||
5/8" | 1/2" | 400 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
11/16" | 1/2" | 400 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
3/4" | 1/2" | 400 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
High-Load Dry-Running Flanged Sleeve Bearings
An aluminum shell adds strength. Made of Frelon, a PTFE composite, these bearings are both slippery and chemically inert.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
Frelon Plastic Bearings with 6061 Aluminum Shell | ||||||||
---|---|---|---|---|---|---|---|---|
For 10mm Shaft Dia. | ||||||||
16mm | 16mm | 22mm | 3mm | 400 lbs. @ 120 rpm | 340 lbs. @ 120 rpm | -400° to 400° | 00000000 | 000000 |
High-Temperature Dry-Running Flanged Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication. They handle higher temperatures than 932 bearing bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||||
---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | ||||||||
5/8" | 1/2" | 7/8" | 1/8" | 400 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | -50° to 700° | 0000000 | 00000 |
3/4" | 1/2" | 1" | 1/8" | 400 lbs. @ 120 rpm | 750 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
Food Industry Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange
Made of FDA listed PEEK, these bearings are suitable for direct contact with food. They withstand wet, corrosive environments and have good chemical compatibility. The closed backing blocks out dust and other contaminants.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Specifications Met | Each | |
PEEK Plastic Bearings with PEEK Plastic Housing | |||||||||||||
5/16" | 23/32" | 1 5/16" | 1/2" | 11/32" | 5/32" | 5/32" | 53/64" | 400 lbs. @ 120 rpm | -140° to 480° | Fixed Alignment | FDA Compliant 21 CFR 177.2415 | 000000 | 00000 |