About Plain Bearings
More
Panel-Mount Dry-Running Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/396/3967n16multipositive_front_positive_right_standard15_1607045241_465@halfx_637426204867396004.png?ver=imagenotfound)
Permanently and securely install these self-clinching bearings into panels, with no need for precision-bored holes or machined mounts. They’re often used in areas with tight space restrictions. Install them into sheet metal panels with an air-powered or hydraulic press. They’re not for use in plastic panels. These bearings are self-aligning to compensate for small amounts of shaft misalignment. Made of acetal plastic, they won’t warp or swell when exposed to water, so they’re good for use in washdown environments.
For technical drawings and 3-D models, click on a part number.
Length | Spline OD | For Minimum Sheet Metal Thickness | Dynamic Radial Load Capacity | Misalignment Capability | Temperature Range, °F | Each | |
Metric Acetal Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 8mm Shaft Diameter | |||||||
11.5mm | 17.1mm | 1.3mm | 43 lbs. @ 120 rpm | 5° | -40° to 180° | 0000000 | 00000 |
Light Duty Dry-Running Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/270/2705t28--9a0fc58fd61605198647-p9@halfx_637407738498197238.png?ver=imagenotfound)
Use where high loads and speeds are not required.
MDS-filled nylon bearings create less friction than standard nylon bearings, making them more wear resistant.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
MDS-Filled Nylon Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | |||||||||
3/8" | 1/2" | 1/2" | 1/16" | 43 lbs. @ 120 rpm | 28 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 00000 |
3/8" | 1/2" | 1/2" | 3/32" | 43 lbs. @ 120 rpm | 28 lbs. @ 120 rpm | Black | -40° to 170° | 00000000 | 0000 |
For 5/16" Shaft Dia. | |||||||||
1/2" | 1/4" | 11/16" | 1/16" | 43 lbs. @ 120 rpm | 75 lbs. @ 120 rpm | Black | -20° to 210° | 00000000 | 0000 |
Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange
![](/prerenderstable/mvPRE/contents/gfx/imagecache/842/8420n115--27f5dac54831612555234-p9@halfx_637481306112553546.png?ver=imagenotfound)
Embedded lubricant particles increase the load capacity of these bearings while also making them slippery. Bearings are self-aligning to compensate for shaft misalignment.
Acetal sleeve bearings won’t warp or swell when exposed to water, making them good for use in washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Acetal Plastic Bearings with Aluminum Housing | ||||||||||||
8mm | 28.5mm | 57mm | 11.5mm | 11.5mm | 4.8mm | 7mm | 44.5mm | 43 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 00000000 | 000000 |
10mm | 28.5mm | 57mm | 11.5mm | 11.5mm | 4.8mm | 7mm | 44.5mm | 43 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 00000000 | 00000 |
Light Duty Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange
![](/prerenderstable/mvPRE/contents/gfx/imagecache/579/5795n15--5dc712da80b1607622655-p9@halfx_637431982002847844.png?ver=imagenotfound)
Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.
Acetal bearings won’t warp or swell when exposed to water, so they’re good for use in damp environments. They’re also self-aligning, which means they swivel to compensate for small amounts of shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Acetal Plastic Bearings with Black-Oxide Steel Housing | ||||||||||||
3/8" | 1 3/16" | 2 3/32" | 29/64" | 25/64" | 1/16" | 7/32" | 1 1/2" | 43 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 0000000 | 00000 |